﻿1
00:00:05,460 --> 00:00:11,920
‫Welcome to the microphone interface demonstration with the ARDE development board for this demonstration

2
00:00:11,920 --> 00:00:17,800
‫we're using the microphone break breakout poured from out of fruit and we haven't connected on the external

3
00:00:17,800 --> 00:00:21,370
‫bread board where there's three pins on the microphone.

4
00:00:21,370 --> 00:00:25,210
‫We have an out ground in our BCSC.

5
00:00:25,390 --> 00:00:29,180
‫The out is the output from the microphone which is an analog signal.

6
00:00:29,380 --> 00:00:34,810
‫And we are feeding the output of the microphone into the zero input on the already developed the board

7
00:00:35,200 --> 00:00:39,410
‫of the chip kit or Arduino Petters.

8
00:00:39,430 --> 00:00:42,440
‫We also have the ground and the DCC.

9
00:00:42,490 --> 00:00:49,660
‫The ground is tied to ground which we have then running back into the ground on the JPM on port and

10
00:00:49,660 --> 00:00:56,440
‫the VCC which is 3.3 volts we have doing the same thing or running that to the 3.3 volts on the JPM

11
00:00:56,440 --> 00:01:02,600
‫on port and for this we also have what we're using one slide switch the reset.

12
00:01:02,770 --> 00:01:04,340
‫Right now we currently have to reset.

13
00:01:04,350 --> 00:01:05,900
‫So nothing's happening.

14
00:01:05,980 --> 00:01:11,650
‫But as soon as I pull it out to reset what's going to happen is my my my voice or the sound waves that

15
00:01:11,650 --> 00:01:13,110
‫are produced from my voice.

16
00:01:13,280 --> 00:01:19,360
‫Well go into the microphone and the microphone will take and oscillate them and produce an analog output

17
00:01:19,360 --> 00:01:25,690
‫based on the frequency and the volume of my voice and the analog signal will then come into our FPGA

18
00:01:25,690 --> 00:01:33,160
‫board or the ADC chip is going to read through an analog to digital conversion and then the delay we

19
00:01:33,160 --> 00:01:37,170
‫have in there is going to sample those rates at 40 kilohertz.

20
00:01:37,180 --> 00:01:44,650
‫So anything we can hear any frequencies that we can hear should show up on these Ltd's and what you

21
00:01:44,650 --> 00:01:49,810
‫notice is as I talk you kind of see the ladies dance or light up in accordance with the way that I'm

22
00:01:49,810 --> 00:01:53,340
‫talking so I'm going to go ahead and enable the switch.

23
00:01:53,380 --> 00:01:58,480
‫So now as I'm talking you can see that the Ltd's blink like whenever you hear my voice you see the OTS

24
00:01:58,480 --> 00:02:04,270
‫turn on and if I don't talk which I won't hear in a minute and see the ladies all turn on now if I talk

25
00:02:04,270 --> 00:02:10,030
‫really while you can just barely hear them blink on and off if I talk louder you'll see that they go

26
00:02:10,240 --> 00:02:11,310
‫up a little higher.

27
00:02:11,680 --> 00:02:15,970
‫And what am I to show you is you can do what's really cool about this is you can kind of synchronize

28
00:02:15,970 --> 00:02:16,810
‫this to music.

29
00:02:16,810 --> 00:02:29,690
‫So here we go play a little music into the microphone and you'll see the ladies live up to it.

30
00:02:49,910 --> 00:02:51,050
‫So that's pretty cool.

31
00:02:51,050 --> 00:02:56,420
‫That's a way if you ever see like in a dance club or any type of nightclub or anywhere else you're at

32
00:02:56,440 --> 00:02:59,820
‫and you see it is like lighting up and you're wondering how do they make it happen to them.

33
00:03:00,050 --> 00:03:00,810
‫To the music.

34
00:03:00,950 --> 00:03:02,030
‫Well this is one way to do it.

35
00:03:02,030 --> 00:03:07,460
‫You can just take a microphone simple and a microphone read those signals and then just display them

36
00:03:07,460 --> 00:03:13,100
‫on LSD and they will flash really quick so it looks really cool and that's you can do is say Christmas

37
00:03:13,100 --> 00:03:15,020
‫lights I'd be a great example for this.

38
00:03:15,050 --> 00:03:17,740
‫We're only using that eight ideas that are on the board here.

39
00:03:17,750 --> 00:03:23,060
‫But you could string a whole and a whole strand of Elodie Christmas lights and do the same exact thing.

40
00:03:23,360 --> 00:03:27,530
‫And that is the microphone demonstration running on the already development board.

