WEBVTT 00:00.060 --> 00:02.070 So now we'll start implementing a battleship. 00:02.280 --> 00:07.420 OK, so this is the schematic that we get with whatever discussion we have in our previous week. 00:07.440 --> 00:11.910 Right now what we'll do is we'll go to a volume and I'll just for three. 00:11.940 --> 00:16.470 Two is two one because that is the fundamental block that we require to implement a paradigm shift. 00:17.070 --> 00:20.490 OK, so we'll proceed with. 00:21.370 --> 00:30.250 Select as one of encode, we also require two inputs, which are the data input, so EMV in sender and 00:30.250 --> 00:31.390 the school logic. 00:31.650 --> 00:39.550 OK, and finally we required an output Silvy, which represents out again, the type should be standard 00:39.550 --> 00:40.890 in the school lot. 00:40.930 --> 00:41.210 Right. 00:42.990 --> 00:45.700 No, here we can use a different modeling style. 00:46.010 --> 00:53.790 OK, but let us stick to a procedure or a behavioral modeling site, so we'll start with the process. 00:53.850 --> 00:57.830 OK, and since this is a sequence, this is a combination of circuits. 00:57.900 --> 00:59.980 So we'll make it sensitive to all the inputs. 00:59.980 --> 01:06.120 So we just start being selected inside the sensitivity list and then we'll just change our process. 01:06.690 --> 01:08.430 Now, here we know that if. 01:09.540 --> 01:11.700 Selectors, that is is you. 01:13.170 --> 01:24.960 Zero, OK, in that case, why should we Questa else and why should be was to be OK since we started 01:24.960 --> 01:26.840 and if we'll just end not. 01:31.830 --> 01:33.670 OK, so this completes the behavior. 01:33.690 --> 01:42.780 So remember, put in a prison guard, both of our monks, whereas would be to the PIN number one of 01:42.780 --> 01:43.500 our monks. 01:44.490 --> 01:46.950 So those are the two doubles and then we have selected. 01:47.400 --> 01:52.320 So we'll just see Rocco and now will proceed for creating an IP. 01:52.330 --> 01:55.230 So we'll go to the Wall Street and package IP. 01:55.230 --> 01:56.280 We'll click next. 01:56.550 --> 02:02.280 We'll package our IP in the current project so that it will automatically be added to a repository. 02:02.340 --> 02:02.690 OK. 02:02.940 --> 02:08.470 Only thing that will observe is that you so you have three inputs, A, B select and you have an output. 02:08.490 --> 02:09.720 So this seems perfect. 02:10.230 --> 02:12.070 Will just go ahead and package. 02:12.100 --> 02:12.490 All right. 02:12.810 --> 02:16.480 So once our packaging is done, we'll start with the block, decide. 02:16.620 --> 02:18.610 OK, we'll stick to it for me. 02:19.410 --> 02:27.930 Now, you already know that we require each such instance for muckrake to now will first see the. 02:29.730 --> 02:37.770 I guess so we haven't changed, so it will be having a nervous stop, right, so required each such 02:38.250 --> 02:41.550 to just copy and will be stateful times. 02:42.460 --> 02:46.150 And then what we'll do is we'll just. 02:47.540 --> 02:50.580 Align them together in a logical direction. 02:50.630 --> 02:53.570 OK, and then we can copy the group, so. 02:55.030 --> 02:57.690 You just select all the hallmarks. 02:58.660 --> 03:08.110 OK, so select control, then you able to select a multiple block and then you just press control and 03:08.110 --> 03:08.590 control. 03:08.620 --> 03:14.040 We soon able to see the four more instances of four straight. 03:16.480 --> 03:22.810 Now, what we'll do is first we'll create an input and help appropriate so for an input we required 03:23.710 --> 03:31.540 for a single bit code for selecting the required to single people, similarly for an output required 03:31.540 --> 03:32.320 for poultry. 03:32.650 --> 03:35.020 So we will proceed and we to put. 03:36.140 --> 03:44.990 So you have an option to create a board, we'll just name this as D.C., OK, which represents Dean 03:45.110 --> 03:53.430 Zero, OK, and then we'll just copy them together, control C, control V and we control rewrite. 03:53.720 --> 03:56.840 So we have D when D two and three. 03:57.050 --> 03:58.340 So this will represent. 04:00.070 --> 04:08.280 Dean zero lead one to any entry we required for a selective silliness, just go ahead and we like to 04:08.290 --> 04:09.090 more quotes. 04:09.460 --> 04:09.810 OK. 04:11.550 --> 04:20.590 So we'll go at rewritable as zero input again, and we just copied and pasted, right. 04:20.620 --> 04:21.600 So we have a.. 04:21.900 --> 04:23.990 A. one also available with this. 04:27.190 --> 04:33.940 Finally required for our proposal to create a boat and that will have a direction of an output and it 04:33.940 --> 04:37.410 should be due to name as Visi or. 04:39.920 --> 04:43.700 OK, we'll just copy and we'll be streetwise. 04:46.130 --> 04:50.420 So we are right when we have to, and then we have white. 04:52.570 --> 04:55.770 So we'll just connect this to raise you, right? 04:55.830 --> 05:01.120 So if you just see a figure, you'll be finding we have zero connected to our Facebook, so we will 05:01.810 --> 05:09.510 follow the same terminology, will disconnected to hear why we should be connected to the next output 05:09.830 --> 05:11.530 then we have. 05:13.780 --> 05:14.210 Right. 05:14.440 --> 05:21.640 And then finally, we have it, so this completes our first connection, that is why zero y one, right, 05:21.640 --> 05:25.780 when Y three are connected to the series of marks that we have in the medical direction. 05:26.500 --> 05:34.360 So here for Séraphin, we want these zero Daewon D two and then three to just go ahead. 05:35.810 --> 05:41.480 So here is Representative Robbinsville just connected to this. 05:43.900 --> 05:51.430 OK, similarly, we can take this to Divine Will, connect this to these two, and then we'll just take 05:51.440 --> 05:52.270 this to a little. 05:53.800 --> 06:02.440 So for this bloc, select should be selected for this entire column, it should be displaying it. 06:03.950 --> 06:04.860 We're here. 06:04.970 --> 06:05.310 OK? 06:05.600 --> 06:07.500 And that's when we'll just bring with you. 06:09.920 --> 06:14.970 So let's try to connect as to all all right, so. 06:16.980 --> 06:18.060 As you know. 06:20.030 --> 06:26.540 OK, and then we want this to be connected to an estimate of just what we'll do if we just feed it to 06:27.020 --> 06:28.310 NSW, right. 06:28.370 --> 06:28.700 So. 06:31.680 --> 06:39.460 OK, so we have NSW, we've been connected to our entire column of REMOXY, this is what we have in 06:39.460 --> 06:44.460 the schematic calls for this data connection when we have. 06:45.540 --> 06:56.390 D2 Guitry this year or so, we'll just take twenty three first, so here we wanted to do is to soon 06:56.940 --> 07:03.780 they then for next we want these three so we'll just be connecting over here and then we have. 07:04.800 --> 07:12.720 These just select this will connected to this hero and this we will be connecting to the right. 07:12.750 --> 07:17.730 So this completes all the connection that we have an end in sight for this one thing. 07:18.120 --> 07:26.310 We whatever that we have, we should be connecting it to pin number one of this first rate Discworld 07:26.310 --> 07:29.580 Wallarah that we have will be connected to PIN number one. 07:29.600 --> 07:31.080 Superspeed number one is. 07:33.570 --> 07:40.560 OK, and then next one that we have is this whatever output that we have for this first mux will be 07:40.560 --> 07:42.210 connecting it to the second mux. 07:42.600 --> 07:47.670 Similarly, for the second, Mux will be connecting it to third and thus far the third most will be 07:47.670 --> 07:53.760 connecting to illustrate to this output will be feeding to. 07:54.830 --> 08:01.890 The second one, this will be feeding to the next one and then this will be feeding to the last day 08:01.940 --> 08:04.070 to this complete all the connection for one. 08:05.570 --> 08:12.830 OK, then, for Lazerow, you'll be noticing that whatever we have, it will just be feeding it to the 08:12.830 --> 08:20.270 respect to say we'll just go ahead and will connect this to the slain, OK? 08:20.360 --> 08:26.420 Similarly, this to the next line, this one, two or three months. 08:26.420 --> 08:31.310 And then finally this to our final straight. 08:32.820 --> 08:35.910 So now this completes our entire week. 08:36.070 --> 08:44.880 So if we just try to regenerate, it will basically clean up a diagram of it and then we'll just validate 08:44.880 --> 08:45.200 targets. 08:45.450 --> 08:49.890 So once validation is successful, we'll just go ahead and create. 08:51.110 --> 08:52.310 The is still the. 08:55.460 --> 08:58.790 So now we have our opportunity now what we'll do is we'll just check. 08:59.620 --> 09:05.290 Whether it is stop money and then will feed some random stimuli and will observe that we are getting 09:05.290 --> 09:05.630 correct. 09:05.780 --> 09:06.310 All right. 09:06.790 --> 09:09.850 So in the simulation also we have a design wrap. 09:09.850 --> 09:12.850 The appearance of top models will perform a behavioral simulation. 09:17.130 --> 09:26.510 OK, so now what we'll do is we'll just create a virtual bus for all the religion in D.C. to divine 09:26.720 --> 09:28.640 two and three represent our. 09:30.270 --> 09:36.960 But they destroyed this underrepresented are selected and why you do it, three representative. 09:38.930 --> 09:43.910 All right, so for us three, OK, so if you just see. 09:45.190 --> 09:46.000 Over here. 09:46.030 --> 09:47.230 So these three. 09:48.870 --> 09:55.860 And Dautry, so they should be on the same position and so this seems fine, what we'll do is we'll 09:55.860 --> 10:05.820 just go ahead and first apply the values, OK, so as soon as then, Batarseh of Wisconsin. 10:06.980 --> 10:07.610 Seydou. 10:09.490 --> 10:15.570 And whose constituency when they you to do whatever we have it in these zero? 10:16.070 --> 10:21.780 OK, so I just use food to consume so little supply. 10:22.000 --> 10:24.190 In fact, we can use force also. 10:24.970 --> 10:28.210 Just add some random foods, consume one. 10:29.190 --> 10:35.850 OK, then foods can't run again and foods can't see. 10:36.130 --> 10:36.430 OK. 10:36.460 --> 10:40.510 So we have fed zero one one zero if you just try to execute the code. 10:40.700 --> 10:44.560 Now what I'll do is I'll try to merge the things together. 10:44.680 --> 10:52.630 OK, so this is when the twenty three will create a new waterbus and this will be naming its steam. 10:53.590 --> 10:56.400 OK, and four is zero and seven. 10:56.690 --> 11:01.870 OK, we'll just merge them together, will create a new virtual bus we'll just need to select. 11:03.690 --> 11:10.320 OK, and then we have zero, right, when right when we just merge them together with a new virtual 11:10.320 --> 11:15.710 person we just named Jesus to operate, so we'll be noticing when we have a zero shift. 11:17.500 --> 11:26.140 Here you can clearly see that we have seen value at butoh thing to future students, relics to a winery. 11:28.510 --> 11:33.460 And we finding that the nine and old exactly have the same because we are not shifting. 11:34.650 --> 11:36.270 Now, if I just try to. 11:37.430 --> 11:39.540 Fools zero one, right? 11:39.560 --> 11:51.380 So if you just try to force Esswein to a one right when we fools S21 here, we give as zero zero ninety 11:51.410 --> 11:58.030 free for this one to a one will get shift in right direction, OK, with a unit of one. 11:58.040 --> 12:00.980 So we'll get a single big shift in the right direction. 12:01.580 --> 12:02.960 So we'll just go ahead. 12:02.960 --> 12:08.420 Will apply foods consistent again one OK, and we'll try to execute. 12:08.810 --> 12:12.310 So now we'll be noticing that on a select we have one. 12:12.350 --> 12:12.560 Right. 12:12.590 --> 12:16.910 So if you just change our Alex to a winery, you'll be finding that now we have zero. 12:17.240 --> 12:21.860 So once we have a zero and so we can get the right shift with a unit of one. 12:21.890 --> 12:28.520 So this one will come over here and we'll get one over here and then one will be here and this will 12:28.520 --> 12:29.440 be coming up here. 12:29.690 --> 12:31.710 So we should be getting zero zero one. 12:31.910 --> 12:33.200 And that is what we are getting. 12:34.250 --> 12:37.520 If you just try to add one zero. 12:37.940 --> 12:38.320 OK. 12:40.180 --> 12:49.690 So if you just try to get one Zeitels, we'll just use constraint S02 over and Woods constraint this 12:49.690 --> 12:50.310 to see. 12:50.560 --> 12:50.920 Right. 12:51.430 --> 12:53.790 So if you just try to perform a simulation. 12:53.800 --> 12:55.170 So when we have one zero. 12:55.530 --> 12:57.610 OK, so we should be getting to shift. 12:57.700 --> 12:58.000 Right. 12:58.420 --> 13:04.540 So this one should be coming in first position because two shifts to one shift over here and the next 13:04.540 --> 13:06.150 shift on the MSP position. 13:06.190 --> 13:09.700 So this is what is happening with this one for this. 13:10.800 --> 13:12.960 When will be getting to shift? 13:12.980 --> 13:17.350 So this should be coming over here and then we'll be getting the it's one 00, right. 13:17.580 --> 13:20.180 So our battleship there is looking fine. 13:20.190 --> 13:26.110 And this is how you can utilize we are to be integrated to build up a complex subcontract. 13:26.430 --> 13:31.950 The advantage that we get instead of directly pressing and I still call in and canvasses. 13:31.950 --> 13:33.840 You can alter the configuration parameter. 13:34.110 --> 13:37.950 You you also do not get a provision to edit an IP in between. 13:37.950 --> 13:44.400 If you find some error, you need to go again to the school and then you need to. 13:45.830 --> 13:50.780 Again, drag and drop the conviction that you need to seriously change the conviction, whereas when 13:50.780 --> 13:56.240 you use an IP, once you merge, the changes we want will automatically upgrade. 13:56.690 --> 13:58.540 That is an advantage that we get trade. 13:59.860 --> 14:07.480 So those are the fundamental things that you need to understand about an integrated so we cover almost 14:07.480 --> 14:10.210 everything that you need to know about an integrated.