WEBVTT 00:00.060 --> 00:07.230 So now remember that we have our IP, which is just created by us, is inside a project. 00:08.080 --> 00:15.450 OK, we will just close our project and what we do is we create a block design in a new direction. 00:15.640 --> 00:15.930 OK. 00:19.110 --> 00:26.490 So we'll start with the project will click next, will choose the final project folder sixty four will 00:26.490 --> 00:28.770 proceed, will again choose. 00:28.770 --> 00:34.470 We know that we have made our IP compatible to Antarctic's seven family. 00:34.740 --> 00:38.210 We will choose a booster's that we are able to observe the. 00:39.530 --> 00:45.980 I'd be entitled to say, OK, so we have to send an Arctic seven family and then we'll just finish. 00:47.200 --> 00:50.080 OK, so now I just try to create a blog to say. 00:51.790 --> 00:55.070 OK, and I try to find out and that Peter. 00:56.140 --> 01:02.860 Let's see what happens when I click on Presbyter and I try to search for and then the school age will 01:03.040 --> 01:10.060 be finding an IP by default in the block because we do not have our IP as well as block design in the 01:10.060 --> 01:10.810 same territory. 01:11.410 --> 01:13.950 So now will understand how you handled this situation. 01:13.960 --> 01:15.370 So we'll just go to a setting. 01:16.220 --> 01:21.650 OK, then you have an IP setting over here, OK, or else you can just right. 01:21.700 --> 01:25.150 Click and then also you get directly to an IP set. 01:25.330 --> 01:28.300 OK, so just go to an IP, ok? 01:28.590 --> 01:32.770 You can follow any option that you want and then we go to a repository. 01:32.800 --> 01:39.730 OK, so here we need to specify a repository that we have an IP so we know that there are IP inside 01:40.300 --> 01:41.640 the security folder. 01:41.680 --> 01:43.470 So we'll just click on this side button. 01:44.630 --> 01:52.880 OK, and then we know that we have our full address d the vital project, and then it should be project 01:53.210 --> 01:54.400 sixty three days. 01:54.430 --> 02:01.550 So we'll just go ahead and choose Project 63 and once we select, we'll be finding if we are able to 02:01.550 --> 02:03.860 find any IP inside that folder. 02:03.890 --> 02:10.580 So it will automatically give you a notification that one repository was added to your project and if 02:10.580 --> 02:18.800 you just search it Isar and then the school will just select and will click apply and will OK. 02:19.130 --> 02:29.160 Now if you just go to the same again and we search for nine at the school now do that I take. 02:30.420 --> 02:33.120 So this is how you refresh an IP repository. 02:33.190 --> 02:37.140 Now, let's assume that you want to make changes in this IP. 02:37.440 --> 02:42.340 So you later found out that instead of an engine, you want to have an arcade. 02:42.450 --> 02:44.910 OK, so how do you handle that situation? 02:45.400 --> 02:51.120 A workaround will be that you go to your previous project that is project and exclusive city, that 02:51.120 --> 02:58.980 you modify, that you modify the code and then you try to change that IP or an IP the other way around 02:59.160 --> 03:00.270 you to select an IP. 03:00.390 --> 03:04.000 Right click and you get an option to edit in an IP package. 03:04.050 --> 03:06.610 OK, so we'll just select and edit IP packages. 03:06.640 --> 03:09.420 So this will automatically create a new vido project. 03:09.450 --> 03:16.680 So instead of we going into a project and a specific city and doing an update instead, we will automatically 03:16.680 --> 03:22.820 create a new Revital project for us once we write click on an IP and we selected it in an IP package. 03:23.520 --> 03:25.980 So finally, we now have our school here. 03:26.190 --> 03:29.720 OK, so we'll just change this from nine to. 03:31.370 --> 03:32.960 OK, and then we'll see why. 03:33.230 --> 03:41.020 So once we see Laku, OK, let let us allow vital to update and hierarchy and then we go to a package. 03:41.390 --> 03:46.300 OK, so immediately you'll be finding that we recognize that there are some changes. 03:46.310 --> 03:51.710 So you have changes on a custom edition parameter portside interfaces to do one package. 03:52.280 --> 03:54.870 So wherever you see a pencil and paper. 03:55.010 --> 04:01.700 So there you are to have identified that you have done some changes so we can just go ahead and then 04:01.700 --> 04:03.880 we can select this option much. 04:05.060 --> 04:08.810 Then you again go to the one package, then you select this option. 04:08.840 --> 04:13.430 One more important point is if you just go to the. 04:16.810 --> 04:21.580 ID there, we also get an option to choose a category. 04:21.800 --> 04:28.000 OK, so if we are developing an app for a specific category like communication interface, then you 04:28.000 --> 04:34.900 can in fact specify the communication category and then your IP will be displayed in that specific. 04:36.300 --> 04:43.020 Plus, right now, it has been chosen as USRAP, so you can look around and see how you can choose a 04:43.020 --> 04:49.530 different class once you merge all the changes, you go to review and package and you just hit repackage 04:49.560 --> 04:53.340 and once you repackage, word will automatically close a project. 04:53.890 --> 04:59.820 OK, so this will be package and it will automatically go to a project again once. 05:00.760 --> 05:08.490 You close a project or once you update and you'll be immediately seeing a notification that the ad on 05:08.590 --> 05:12.050 the script, but you should be updated. 05:12.070 --> 05:15.060 That is, we have an update on an OK. 05:15.160 --> 05:17.470 In fact, if we go to the. 05:19.810 --> 05:21.390 Report, I be straight with you. 05:21.790 --> 05:27.330 OK, so we'll be finding that we immediately get one more step, which is to say and you will be finding 05:27.330 --> 05:31.600 that IP believe in change and IP definition has changed. 05:31.620 --> 05:35.470 OK, so we can just select that IP and that has been selected by default. 05:35.550 --> 05:41.580 OK, and then you can just click on Upgrade Selected so we will automatically upgrade an IP for us and 05:41.580 --> 05:45.660 it will in fact update all the files which are available with an IP. 05:46.190 --> 05:47.580 OK, we'll just. 05:48.960 --> 05:49.740 Lecoq. 05:51.310 --> 05:57.880 And then we'll just have to see whether it is up to date and we'll find it that, no, we have our IP, 05:58.390 --> 06:03.150 OK, so we'll just verify whether it is working as an OK, so we'll just go ahead. 06:03.160 --> 06:03.390 Right. 06:03.400 --> 06:05.130 Click make external. 06:06.460 --> 06:09.730 OK, again, this should be make external. 06:13.440 --> 06:16.530 And this output should also be meekest and. 06:23.160 --> 06:27.250 And we'll just change the Courtney E! 06:28.490 --> 06:32.960 Then we have B and then finally we have white. 06:35.210 --> 06:42.560 OK, now, once our design is ready and clear out and then validate design, so once validation is successful, 06:42.560 --> 06:44.630 go ahead to sources and right. 06:44.660 --> 06:46.450 Click and create and still happen. 06:48.820 --> 06:50.600 So one side is ready. 06:51.250 --> 06:54.280 Now, what we do is we just perform a simulation. 07:02.870 --> 07:10.390 OK, so we'll use a false confession rate like false concerning foreign hexadecimal to decide when and 07:10.400 --> 07:11.220 when you're here. 07:11.510 --> 07:16.130 OK, and then for the ladies I see 22. 07:16.190 --> 07:20.880 So if this is behaving as an --, so we should get one one at 10:00. 07:21.090 --> 07:23.330 So if you just try to execute our call, you'll be fine. 07:23.930 --> 07:24.620 We have one. 07:25.160 --> 07:30.890 So obviously we have defined it to be an Ankit, and that is we might be getting all to you, but when 07:30.890 --> 07:35.660 we replace or update our IP, we can actually see that it is behaving as a.. 07:35.780 --> 07:38.810 OK, so now you have an idea of your updated IP. 07:38.840 --> 07:43.670 So there are two ways you can either go to an old project where you have created an IP. 07:43.910 --> 07:44.510 There you. 07:46.160 --> 07:53.510 Update the changes, OK, and then you edit your IP package or finally repackage your IP, or you can 07:53.510 --> 07:55.110 just right. 07:55.220 --> 08:01.580 Click on the IP that you have added on Tuesday and then you can just click on edit IP package. 08:01.850 --> 08:04.900 So that will give us some flexibility which method to follow. 08:05.150 --> 08:12.260 And we have also gone through how we refresh a repository if the IP and the blocked design is located 08:12.260 --> 08:13.610 in a different project. 08:14.600 --> 08:14.850 OK.