WEBVTT

00:08.090 --> 00:14.580
Welcome to the counter-demonstration running on the basis three board here we have the full implement

00:14.630 --> 00:17.570
fully implemented counter running on the basis three board.

00:17.780 --> 00:23.870
And for this lab you don't have to use any push buttons or switches to make it run once you upload on

00:23.870 --> 00:25.310
your board it should just start running.

00:25.310 --> 00:27.140
So I'm going to go ahead and do this.

00:27.140 --> 00:32.170
I currently have it running but I'm going to upload a new read downloaded onto the onto the board.

00:32.390 --> 00:39.620
So right now I'm programming on there and I just see as soon as I programmed it the the green Ltd done

00:39.620 --> 00:45.830
light came on and all the deeds done here are discounting their incrementing and buying area but it's

00:45.830 --> 00:48.510
counting from 0 to like 65000.

00:48.650 --> 00:54.420
And what I have is I have a max count which is set to every tenth of a second.

00:54.560 --> 00:56.120
That's going to update that count.

00:56.120 --> 01:01.370
And that's why you'll notice the lower four or five Ltd's look like they're constantly lit up.

01:01.370 --> 01:04.790
And that's because they are toggling so fast that you can't even tell.

01:04.850 --> 01:06.540
They just look like they're constantly on.

01:06.590 --> 01:13.340
But if you would set your max count to a much higher value you'll slow your count increment timing down

01:13.340 --> 01:17.560
so you can get it to where it increments every one second every two seconds.

01:17.570 --> 01:19.890
And so I recommend you play with that to kind of see if you can.

01:20.060 --> 01:25.760
So the count down so you can see all of them or have to go so fast so just might small but once.

01:25.760 --> 01:30.990
Like if I would have our clock we have on this board is it 100 megahertz clock.

01:31.070 --> 01:37.700
So if we would have no delay as soon as you started this up it would just count that the oil used to

01:37.700 --> 01:40.490
just be lit up right at once and you wouldn't even be able to see it counting.

01:40.540 --> 01:42.650
And so that's all we have to have a delay in there.

01:43.190 --> 01:47.330
But if you are able to get your counterfoil implemented this is what it should look like running on

01:47.330 --> 01:53.300
the bases board and you'll notice that like you said just counting in binary that it keeps incrementing

01:53.300 --> 01:54.830
the ladies down.

01:54.950 --> 02:00.620
And one thing I would suggest you try is maybe see if you can get the count to implement on a 7 segment

02:00.620 --> 02:02.770
display maybe incorporate the lab for it.

02:02.800 --> 02:05.750
This night is the last five counter-demonstration.