1
00:00:00,540 --> 00:00:02,880
Hardware and software requirements.

2
00:00:03,640 --> 00:00:07,830
Now we need an SPF 30 to a ball.

3
00:00:08,250 --> 00:00:11,040
And we also need an Arduino board.

4
00:00:11,520 --> 00:00:15,770
These are the hardware requirements since we are going to connect that.

5
00:00:15,780 --> 00:00:18,360
Yes, people with Arduino Bolt.

6
00:00:18,990 --> 00:00:28,320
We also need a TTL, let's say, level shifter, because ISP deals with 3.3 volt while Arduino deals

7
00:00:28,320 --> 00:00:29,280
with five fold.

8
00:00:29,580 --> 00:00:36,660
And since we need to can make that of these two more seriously, we need a converter and we will explain

9
00:00:36,660 --> 00:00:39,930
that in the circuit design section.

10
00:00:41,370 --> 00:00:51,150
Now you'll also need wires, a USB cable to connect your Arduino ball to your computer, and another

11
00:00:51,150 --> 00:00:55,710
USB cable to connect your ISP ball to your computer.

12
00:00:56,220 --> 00:01:01,020
And we will need an NQT broker account.

13
00:01:01,410 --> 00:01:07,950
I would explain how you can do that, how can you, how you can create an account and what is security

14
00:01:08,010 --> 00:01:09,900
protocol and why we need it.

15
00:01:10,830 --> 00:01:17,880
We will also need an Arduino IEEE development environment, and I'm going to explain how you can install

16
00:01:17,880 --> 00:01:21,270
it and how you can add the libraries.

17
00:01:21,270 --> 00:01:23,820
We need to implement this project.

18
00:01:24,690 --> 00:01:32,730
Now again, the five four two three one three volt level converter to convert the signal level is very

19
00:01:33,000 --> 00:01:34,470
important in this project.

20
00:01:34,470 --> 00:01:38,070
Otherwise you might damage your board and.

21
00:01:39,330 --> 00:01:46,260
These are the things that you need to have before moving forward if you just want to gain knowledge.

22
00:01:46,590 --> 00:01:50,490
You can skip the harder part and keep watching this course.

23
00:01:50,730 --> 00:01:57,840
But if you want to do this practically, you need to have these tool boards and the converter as well.

24
00:01:58,020 --> 00:01:59,310
Thanks for watching this lesson.

25
00:01:59,760 --> 00:02:00,450
See you next!