1
00:00:00,600 --> 00:00:08,010
Now, to make sure that our ISP has connected to our cloud NQT server, I already mentioned that you

2
00:00:08,010 --> 00:00:10,230
have to download them due to the Explorer.

3
00:00:10,350 --> 00:00:14,670
And as you can see here, we have one topic and about 11 messages.

4
00:00:15,480 --> 00:00:22,560
And if we did open the messages, we can see that Odyssey presents ISP 32 and the message is Hello World,

5
00:00:22,560 --> 00:00:28,050
which is the message that we did send using our code.

6
00:00:28,230 --> 00:00:28,800
If you.

7
00:00:31,420 --> 00:00:38,500
Take a look at what coding you can see that here we have Helloworld and we have I pleasants SB 32.

8
00:00:38,990 --> 00:00:41,180
OK, now if we went back, I was.

9
00:00:41,180 --> 00:00:46,270
You can see we have about 11 messages and this is our ESB compost.

10
00:00:46,330 --> 00:00:54,220
I would just ESB board and you would see that their lovely messages will become 12 messages once I received

11
00:00:54,220 --> 00:00:54,760
the ball.

12
00:00:55,210 --> 00:00:56,650
I will flick to sit down.

13
00:01:02,160 --> 00:01:04,710
As you can see now, it's 12 messages.

14
00:01:05,190 --> 00:01:09,060
And if I click see it again, it will be 13 messages.

15
00:01:09,570 --> 00:01:20,490
So each time we turn on our ISP board, it will send Helloworld to our NQT server, and once we connect

16
00:01:20,490 --> 00:01:26,520
it to our Arduino board, it will start sending sensor data to this topic.

17
00:01:27,180 --> 00:01:33,660
And again, all what you need to do now is follow the circuit design instruction and the next section

18
00:01:34,050 --> 00:01:42,300
to connect Arduino board and yes, people together to start sending sensor data from Arduino to SB 32

19
00:01:42,570 --> 00:01:45,060
and from there to that NQT server.

20
00:01:45,840 --> 00:01:46,470
That's it.

21
00:01:46,770 --> 00:01:47,590
Thanks for watching.

22
00:01:47,610 --> 00:01:50,370
This is Ashraf from educational engineering team.