1
00:00:00,690 --> 00:00:01,440
Hello and welcome.

2
00:00:01,830 --> 00:00:09,630
Now, most of you know that e-sport has built in touch sensors, so you will take the readings from

3
00:00:09,630 --> 00:00:18,240
three touch sensors from our ESB board and to do that, we have a touch sensor on Pins two, four and

4
00:00:18,240 --> 00:00:18,780
15.

5
00:00:19,320 --> 00:00:20,310
So go to the lube.

6
00:00:21,800 --> 00:00:26,840
And here you can simply write in your request.

7
00:00:28,840 --> 00:00:32,620
And a sort of sense of value, one you can say blessed with.

8
00:00:33,940 --> 00:00:34,390
Dutch

9
00:00:37,750 --> 00:00:38,200
read.

10
00:00:40,700 --> 00:00:41,810
Which is basically.

11
00:00:42,860 --> 00:00:49,100
A function that would take the pin number for the touch sensor.

12
00:00:49,610 --> 00:00:53,900
So this is our first touch sensor.

13
00:00:56,230 --> 00:00:59,380
And for value tool, we will tie Dutch read,

14
00:01:02,350 --> 00:01:12,010
the second sensor is up general purpose input output pin number for the third sensor watches touch read

15
00:01:14,740 --> 00:01:16,790
number 15.

16
00:01:18,490 --> 00:01:20,860
Now let's upload the code again.

17
00:01:23,170 --> 00:01:29,200
We will make sure that our web page will play the reading from these three Dutch sensors.

18
00:01:29,590 --> 00:01:35,890
You can replace this with any other sensor, so there is no limit here.

19
00:01:35,920 --> 00:01:37,330
You can add more sensors.

20
00:01:37,570 --> 00:01:39,550
You can add more items to the table.

21
00:01:39,790 --> 00:01:41,920
It's up to you now.

22
00:01:42,190 --> 00:01:44,590
There's an opening for.

23
00:01:46,460 --> 00:01:50,330
OK, let's touch the ball again.

24
00:01:53,720 --> 00:02:04,850
Click upload again and wait a few seconds until the code is compiled and uploaded to our USP board.

25
00:02:05,480 --> 00:02:09,950
And let's get our page ready, as you can see.

26
00:02:12,140 --> 00:02:15,470
This is our page, the request page.

27
00:02:15,860 --> 00:02:18,680
And it did take a lot of values, as you can see here.

28
00:02:21,430 --> 00:02:24,910
Now, the sort of value and value tool and value three.

29
00:02:26,090 --> 00:02:27,080
We will get.

30
00:02:31,350 --> 00:02:32,370
The essential values.

31
00:02:34,390 --> 00:02:41,950
So it will be more useful to get of reading here now than uploading.

32
00:02:42,820 --> 00:02:44,020
Let's refresh the page.

33
00:02:44,860 --> 00:02:45,280
OK?

34
00:02:45,310 --> 00:02:48,700
As you can see now we have censors reading.

35
00:02:49,090 --> 00:02:54,370
As you can see, this is the first touch since all of this is the second one, and this is the third

36
00:02:54,370 --> 00:02:54,610
one.

37
00:02:54,970 --> 00:02:58,360
Every 30 seconds, we will get nuisance or readings.

38
00:03:00,450 --> 00:03:01,620
I will refresh the page.

39
00:03:02,650 --> 00:03:04,410
I can see now we have new readings.

40
00:03:04,980 --> 00:03:06,360
You can add other sensors.

41
00:03:06,360 --> 00:03:10,200
You can change this to be too ambitious since your

42
00:03:13,080 --> 00:03:16,530
humidity sensor or any other type of sensors.

43
00:03:16,950 --> 00:03:18,390
Sky is the limit here.

44
00:03:18,780 --> 00:03:22,840
Again, all of the codes and everything will be attached to the course material.

45
00:03:23,850 --> 00:03:27,150
If you have any questions regarding anything, I'm here to help you.

46
00:03:27,180 --> 00:03:27,840
Thanks for watching.

47
00:03:27,870 --> 00:03:30,360
This is Ashraf from educational engineering team.