1
00:00:01,200 --> 00:00:08,040
Now, this story that's the first to verify the code and make sure that we don't have any errors.

2
00:00:16,840 --> 00:00:21,400
OK, Don, combining now we have to go back and write our network name.

3
00:00:21,520 --> 00:00:22,050
That's a side.

4
00:00:22,520 --> 00:00:25,070
It has to be the same as this network.

5
00:00:25,090 --> 00:00:26,130
It's called Ashraf.

6
00:00:26,560 --> 00:00:26,990
OK.

7
00:00:27,700 --> 00:00:29,920
I would put out this information.

8
00:00:51,600 --> 00:00:54,120
OK, now once you've allowed this information.

9
00:00:58,180 --> 00:00:59,860
Go back and compile your code.

10
00:01:12,160 --> 00:01:14,680
Now, let's go ahead and connect our board.

11
00:01:17,280 --> 00:01:18,750
Now, once you connect the world.

12
00:01:21,280 --> 00:01:27,730
The next step will be going to the tools and selecting the COMPORTE, make sure that you have selected

13
00:01:27,730 --> 00:01:29,770
the board, which is the way IT board.

14
00:01:31,870 --> 00:01:34,780
Do it SB 32, difficult federal one.

15
00:01:35,410 --> 00:01:39,610
Then you can simply upload your code.

16
00:01:44,140 --> 00:01:50,590
OK, now you have to create a new access point name.

17
00:01:51,130 --> 00:01:53,930
I called my access point at ISP.

18
00:01:54,760 --> 00:02:01,270
This is the password for this ISP access point.

19
00:02:01,960 --> 00:02:04,570
And these are IP configurations.

20
00:02:05,170 --> 00:02:11,140
Now what you need to do once you upload the code is go to the Wi-Fi networks and make sure that you

21
00:02:11,140 --> 00:02:16,120
are connected to this network of ISP or whatever you called it.

22
00:02:16,840 --> 00:02:20,260
Once you write that password, you will be connected to this network.

23
00:02:20,860 --> 00:02:26,490
And sometimes it doesn't take the IP configurations that you provided here.

24
00:02:27,040 --> 00:02:36,490
So when you try to open up, open up a browser and write one hundred ninety eight one six eight zero

25
00:02:36,730 --> 00:02:38,530
one six five.

26
00:02:39,610 --> 00:02:44,030
It's one to connect and to try to figure out what's going on here.

27
00:02:44,510 --> 00:02:52,460
You can't simply go and click on properties to see the Wi-Fi network capabilities head down until you

28
00:02:52,460 --> 00:02:53,120
see this.

29
00:02:54,390 --> 00:02:59,730
Server address 192, that eight 8.4.1.

30
00:03:00,540 --> 00:03:02,250
Let's throw this line.

31
00:03:06,280 --> 00:03:08,830
The one once you click into.

32
00:03:13,290 --> 00:03:17,330
As you can see, here we are in our old beige SB 32 browser.

33
00:03:17,800 --> 00:03:20,430
And these are the two buttons that we created.

34
00:03:21,030 --> 00:03:22,950
These are the heading one and two.

35
00:03:24,090 --> 00:03:29,040
And we can simply turn it on or off using these buttons.

36
00:03:29,040 --> 00:03:29,880
We have two LEDs.

37
00:03:30,420 --> 00:03:37,200
And I will concentrate, as you can see in this video on the built in LED, which is going to be number

38
00:03:37,200 --> 00:03:37,530
two.

39
00:03:38,040 --> 00:03:40,590
And we already have this patent to control it.

40
00:03:41,140 --> 00:03:46,830
And now let's go to the COMPORTE so that we can see what's here.

41
00:03:48,830 --> 00:03:54,710
Now, once we open up this page, as you can see, the lids are off and we got this line.

42
00:03:55,220 --> 00:04:01,130
When you click on, as you can see, it's telling you that this lid is on.

43
00:04:01,310 --> 00:04:03,320
It's not no fault, it's number two.

44
00:04:03,770 --> 00:04:06,650
And as you can see in the video, the blue lid is on.

45
00:04:07,280 --> 00:04:11,150
Now, if you clicked again, the blue lid will be off.

46
00:04:11,840 --> 00:04:16,700
And if we have another lid connected to a pin number five, it will be on.

47
00:04:17,090 --> 00:04:22,790
And again, it will turn off if we flipped the bottle again.

48
00:04:23,390 --> 00:04:31,190
So this is how easily you can turn your ISP down observer and control it and connect to it.

49
00:04:32,500 --> 00:04:38,170
As an access point and as you can see that the bullets turning on and off.

50
00:04:41,220 --> 00:04:46,050
And as you can see, this is the line that was called when we kicked here.

51
00:04:48,900 --> 00:04:49,830
It's that easy.

52
00:04:51,270 --> 00:04:56,910
Again, if you went to the main page, it will print, turn both lives and print this line.

53
00:04:57,570 --> 00:04:58,170
That's it.

54
00:04:58,950 --> 00:05:01,980
This is how the code works in action.

55
00:05:01,980 --> 00:05:03,000
You can change this.

56
00:05:03,010 --> 00:05:05,280
You can add more LEDs, you can add more buttons.

57
00:05:05,610 --> 00:05:11,040
You can change the graphical user interface of that same old code, depending on your needs.

58
00:05:11,460 --> 00:05:13,890
If you have any questions, please ask.

59
00:05:13,960 --> 00:05:14,910
And if you aren't able.