In this lecture, we will test our lab environment to get ready for experiencing actualised design techniques
for sequential circuits in the rest of the course.
To test our lab environment, we should test designing such as and we want the software tools as well
as the basis to evaluation board.
Let's first test the White House, run the White House, such a softer by double clicking on its icon
or the corresponding link in the Stockmann.
Create a new project by clicking on the create project link in the White House, such as the Welcome
Page or by clicking on find new project option from the many choose bases, underscore output, underscore
why there's such a list as the project.
You can change the destination folder if you wish and click next.
Then just basic underscore output as a top function name and click next twice.
In the solution configuration window, click on the ellipses icon to select the target FPGA, click
on the board and select the digital and from the window list.
Now you should see the basic storyboard in the list below.
If you cannot see the board name, then you have incorrectly copied the board definition file explained
in the previous lecture to the Basis three board and OK.
Ensure that the we are the only people are target option is selected in the target area.
And then press the finish, but.
Now, we should add the basic underscore out with the source, Sourcefire, the project.
You can find this file in the resources folder attached to this election, download the file on your
computer.
Right, click on the source folder and select new for this version of the white Essentialists tool,
create the file outside the project folder by default, double click on the project folder to create
the file inside that file.
Then copy the content of the downloaded file into the basic underscore out the zip file.
Now you can synthesize designed by clicking on the sentences, but.
You should get the center's report and the finished sentences message in the CONSOLI.
Then you can explore the art of design as a hardware IP by clicking on the export article, but.
You should see the finished export article message in the console.
This completes the white essentialist test process.
Now, let's test the Rimando and the Bases report, firstly, we test the board using its defense ministry,
connect the board to the computer using a we can make sure that the J-P one jumper is on Quispe programming
mode as shown here.
Then turn on the board using the board power switch, the board should be configured by Quispe to the
default test program provided by vigilent.
You should see a 029 counter on seven segments.
Secondly, to make sure that the computer detects the board and can program it, I'm going to program
the board using a bit system for.
For this purpose, turn off the board, change the programming remote to JTAC using the JPN one jumper
and then turn the board on again, as shown here.
To program the world by bitstream.
Rhonda Vado by clicking on it site, create a new project by clicking on the Create Project Link.
Enter the basic underscore output.
Daschle Vado as a project.
In the project type page select article, project option and do not specify sources at this time ensure
that the project is an extensible writer's platform.
Option is not selected in the default part.
Select board and choose a vigilent from the vendor list.
You should see the basis to report on the list.
Select that and click next.
And then the finished product.
Download the basic underscore output debit file from the resources folder attached to this lecture on
your computer, then click on Open Hardware Manager on the left hand side, pain involved.
Then click on the open target link and select the auto connect option.
Click on the program device, then click on the ellipses button beside the supari.
Find basic underscore output that this file on your computer then programmed about.
You should see for this illuminating on the board.
This video is the last lecture in part one.
I will explain how to design sequential circuits in part to starting from the next lecture.