1 00:00:00,180 --> 00:00:05,580 So we already lost this about an internal timers that are available with this embarrassing system. 2 00:00:05,610 --> 00:00:12,600 So we discuss about private data with a pseudo meringue, with a deliberate watchdog over who will be 3 00:00:12,600 --> 00:00:15,840 now discussing how you handle an interest from the right. 4 00:00:16,200 --> 00:00:23,100 So for them, we do not need to do anything like adding an entire thing to a person's system and then 5 00:00:23,110 --> 00:00:26,650 predicting and interest from the resources to another human. 6 00:00:27,180 --> 00:00:32,640 So you just need to create this basic block to say where we have just enabled and you what? 7 00:00:32,700 --> 00:00:40,560 OK and $d theory and utilizing this block that we are ready to work it out with an interferometer private 8 00:00:40,980 --> 00:00:41,210 rate. 9 00:00:41,220 --> 00:00:46,380 So we will be utilizing this block diagram for both the cases when we are working with the private 32 10 00:00:46,380 --> 00:00:49,770 bit sudima and the worst thing. 11 00:00:49,800 --> 00:00:50,060 All right. 12 00:00:50,070 --> 00:00:55,800 So you just need to create a wrapper out of it and proceed for generation of our bootstrap rate. 13 00:00:56,340 --> 00:01:02,400 So the mandatory driver rate, which is the first thing that we do when we start rolling up our application 14 00:01:02,400 --> 00:01:09,630 rates, if you go to the board support package, look so for an issue timer if you just explore the 15 00:01:09,780 --> 00:01:10,950 board support package. 16 00:01:11,190 --> 00:01:13,620 So the recommended driver is a simple timer. 17 00:01:13,860 --> 00:01:18,660 And in the next video, we will be illustrating how you handle an input from a stop, right? 18 00:01:18,820 --> 00:01:22,490 We go ahead and we include a CEU timer darkness, right? 19 00:01:22,500 --> 00:01:23,730 So this is the idea for you. 20 00:01:23,730 --> 00:01:28,920 For our 32 bit private time, for handling an interview, we need to include two driver. 21 00:01:29,340 --> 00:01:31,980 Assume an exception, right? 22 00:01:32,130 --> 00:01:35,520 So other than that, we also required an X parameter, not each fight. 23 00:01:35,790 --> 00:01:39,170 This consist of all the hardware related information, right? 24 00:01:39,180 --> 00:01:44,610 So if you just go through an issue timer again, we have a config structure and an instant structure 25 00:01:44,610 --> 00:01:47,400 which could be utilized to perform an initialization. 26 00:01:47,730 --> 00:01:52,020 OK, then we have a function to check where the timer is expired or not. 27 00:01:52,350 --> 00:01:54,750 We also have a function to restart our timer. 28 00:01:55,740 --> 00:02:01,470 We also have a function to lower our timer, depending on the delay that we are expecting out of 32 29 00:02:01,470 --> 00:02:02,290 bit timer rate. 30 00:02:02,310 --> 00:02:08,430 So this could be used to load the timer depending on the delay that we are targeting for the 32 bit 31 00:02:08,430 --> 00:02:08,850 timer. 32 00:02:09,120 --> 00:02:13,920 I then in turn, if you want to find out the value that we have in a timer at this stage, we could 33 00:02:13,920 --> 00:02:16,080 just utilize get counter-rally function. 34 00:02:16,470 --> 00:02:16,800 OK? 35 00:02:17,010 --> 00:02:21,360 We also have a function to enable or disable an auto reload mode, right? 36 00:02:21,390 --> 00:02:22,680 This we already discussed. 37 00:02:22,950 --> 00:02:28,450 Now you could find out that we have an inability to operate so in any timer, which we discussed in 38 00:02:28,450 --> 00:02:32,780 the previous example there we do not have an inability to act, auto disable, integrate. 39 00:02:32,790 --> 00:02:37,230 So you need to include this if you want to close this switch. 40 00:02:37,230 --> 00:02:41,970 OK, we have a guy named rate, but to close this switch, right? 41 00:02:42,540 --> 00:02:48,030 So we need to find out whether we have any device basically enable, interrupt or enable global into 42 00:02:48,330 --> 00:02:54,930 Brazilian art that if the driver right now we understand that in an SEO timer driver, we do have an 43 00:02:54,930 --> 00:02:55,600 inability to. 44 00:02:56,650 --> 00:02:59,680 So this is utilized to close this. 45 00:03:00,330 --> 00:03:01,030 Remember this? 46 00:03:01,810 --> 00:03:09,260 Then we also have a disabled interest rate, and we also have the EPA that could be used to get them 47 00:03:09,310 --> 00:03:12,490 into this, as well as a clear interest rate. 48 00:03:12,490 --> 00:03:17,430 So a few more functions are present here as compared to any excitement. 49 00:03:17,950 --> 00:03:19,570 And that gives us an advantage. 50 00:03:20,560 --> 00:03:26,350 Other than that, we have a look config CFT initialize self-test start stop and frisk. 51 00:03:27,520 --> 00:03:29,980 So these are the kinds of apps that we have. 52 00:03:30,340 --> 00:03:34,720 OK, now we go ahead and try to disclose an entire application, right?