Who let us try to understand how we use would the time say the first thing which is mandatory for this
demonstration is you should be having both the time or enumerate.
So if you have not uncheck the Enable Timer to option while creating a blog present, then put the time
which will be enabled by default.
We have just added any exciting maybe and we haven't configured it right.
So if you just go ahead and double click on any excitement, maybe to customize it, OK?
You could clearly notice that we have enable hard time, right?
So this is mandatory to utilize all the time, right?
So once you enable both the timer, the only thing that you need to understand is how we distinguish
between the timer rate.
So a zero is the IED given to a timer one and one is an IED given to time and wait or what are we going
to do?
Is there is it's you that count.
When will we use for our time on zero?
OK, so this will be the count that will be loading and end time with zero.
OK, we declare one more variable you thirty two and just name this as how to.
OK.
And this will be having a greater delay as compared to the timer run rate.
So we go ahead and we are this and let it just use this factor to eat right.
So this will be providing a delay of each second rate.
And this will be for a timer run, right?
So have you recognized timer zero?
Is it will have an idea of zero.
OK, on the timer, one will have an idea of what right?
So this won't be changing if you utilize a single dime where you just need to use every single number
throughout your application.
But if you are planning to use, put the timer, then whenever you are planning to work with the timers,
you use the CTA number zero.
OK, so this is basically the EMR CPI number.
And whenever you are planning to work around with that time or what?
OK, so there you need to use the diversity at number as well.
So this is how we distinguish between them.
So now we have a two count, Rachel, where Island will provide us a delay of five second and either
will provide us a review of each second rate.
The process will remain C. Right.
So here we're stopping our time with zero.
We again need to call this function and to stop our timer, but we just need to replace that number
with one.
So this will stop our timer zero.
OK.
And then this will stop timer.
Now you understand how we distinguish between the two timed right.
Then here what we are doing is we are setting up the reset value for our Typekit zero.
So this should be called what?
Look to set the reset value for our time to the process will be very similar, right?
So we again call a reset value function instance structure will remain see only the differences that
the city had.
No, so here we'll be adding the number as well.
And then this should be counted, right?
Was this is done?
OK, we are calling a reset for our time on zero.
We'll also be calling a reset for our timer.
What right then what we are doing is we are setting up an option for our time was zero.
OK, so we can copy this entire theme.
Think because we also want to operate our timer one in our downward only thing that we need to change
is to.
The pmrc, no suit should be won in both the cases.
So what this will do is this will configure Typekit 02 operating at.
Similarly, this will configure that time to operate in a normal rate.
Then we are starting an operation of our time with zero.
Similarly, here itself, we will be starting an operation of our timer one also.
So we just need to replace the diversity at number two.
What right then?
We know that since Demerge zero is having a lower D, let's compare to the immune system of zero will
provide us a delay of around five second timer.
One will provide us a delay of around second rate.
So we know that first timer that will be expiring this time was zero.
So we'll just be calling this right.
We will be waiting for timer to expire and they will be mentioning the timer zero.
Expired.
OK, then we will be waiting again for timer went to expire, so we'll just be calling again.
While the atmosphere is expired, only thing that we need to change is the city at number 10.
Once we reach or here that basically indicate our timer button is expired, we'll just be mentioning
the message to any user that no one is right.
So this is how we distinguish between the two times, Rachel.
Now we know that we have a two timer, you need to enable timer to then only able to utilize both the
timer.
The only difference with how we recognize the different timer rate so it is zero, will be used to recognize
time zero and.
IED went or Yemen's you got no one is used to recognize statement.
So this concludes our application that it just build our application project first.
OK.
And once Bill is successful, what we got to do is we will again be launching our debug session, right?
So select our debugger and then click on Relaunch.
So this will again prove that refugee and we will analyze whether be able to get.
So here we have a roadmap basically indicating that we have some errors in our schools.
So let us try to fix data.
OK.
So if you are, unless we are you declaring option twice.
So that is error that we have, it occurred and it just need this as option one and this has option
two right here.
We need to use option one.
And here we need to use an option.
So let us rebuild our project again.
Right.
So now data that we can see in the previous case is gone, right?
And what's how you define this Haiti?
We'll just be relaunching our debug session.
So once that programming is successful, we go to a like this dominance, so here we already have connected
our serial terminal to come forward and just be clicking on resume.
But right?
So now you could observe a mother did a successful timer zero five second to spot.
And then after a neat second, you'll be getting time on one expired, right, so this is how we utilize
prototype.