1 00:00:00,060 --> 00:00:04,930 So let us try to understand how we use a dual channel with an IP. 2 00:00:05,160 --> 00:00:12,300 So in the previous video, we already understand how what are things you need to enable hockey to connect 3 00:00:12,300 --> 00:00:15,480 or interviews any excited with revising pricing system? 4 00:00:15,510 --> 00:00:19,890 So first, we'll just be enabling that option and then we'll be adding any setup. 5 00:00:20,160 --> 00:00:22,980 So just reconfiguring sync processing IP. 6 00:00:24,760 --> 00:00:32,560 First thing that we need to do is to add and make the report great, so we go to an exciting and enablement 7 00:00:32,560 --> 00:00:34,770 and then deep mastery of. 8 00:00:35,050 --> 00:00:37,860 And here we have an it makes it easier to interface. 9 00:00:38,410 --> 00:00:41,680 Along with this, we also need to research to a general tab. 10 00:00:41,680 --> 00:00:43,780 And there you have a good reason. 11 00:00:43,810 --> 00:00:44,050 Right? 12 00:00:44,290 --> 00:00:49,090 The last thing that we require to add is the clock for our slavery period. 13 00:00:49,090 --> 00:00:54,780 So we go to a clock configuration and in the public will enable f clock clocks here. 14 00:00:54,910 --> 00:00:55,140 Right. 15 00:00:55,160 --> 00:01:01,270 So once this three things are ready, we are ready to interface the eyepiece with the zinc processing 16 00:01:01,270 --> 00:01:01,660 system. 17 00:01:01,660 --> 00:01:08,200 So we go and look for any, say, dubious IP and we can just add it or right? 18 00:01:09,280 --> 00:01:15,790 Doublespeak on any UPI AYP to reconfigure it, so first put, we will be connecting to the races in 19 00:01:15,790 --> 00:01:22,210 which this represented Ipswich and the buttons that we have represent to push back to the next general. 20 00:01:22,210 --> 00:01:25,570 The second channel will be connecting to an elderly future for. 21 00:01:27,870 --> 00:01:33,030 So once you correctly configure both the chain and just click OK and Performer Connection Automation 22 00:01:33,240 --> 00:01:37,290 to select all the ports which are highlighted over here and click OK, right? 23 00:01:38,570 --> 00:01:40,880 So now you could see we have a team processing system. 24 00:01:41,180 --> 00:01:47,210 The process is from research and exciting to connect, which is finally communicating the data to any 25 00:01:47,270 --> 00:01:48,320 site UPI. 26 00:01:48,500 --> 00:01:54,350 Rachel, with an M. weeks, AGP zero has been connected to an Excel interconnect and that is finally 27 00:01:54,350 --> 00:01:56,620 connected to the slithery excite. 28 00:01:56,630 --> 00:01:59,360 Both of the excite you I write to. 29 00:01:59,360 --> 00:02:02,540 Once this is done, just click on validation of your site. 30 00:02:03,910 --> 00:02:09,430 So once validation is successful, we go to a small step, select our block design and create an HD 31 00:02:09,490 --> 00:02:10,330 wrapper, right? 32 00:02:11,670 --> 00:02:18,300 So here in our blog design, you could see we have full DDR style 64bit and HDD for the drive, so DDR, 33 00:02:18,750 --> 00:02:22,210 DDR and fixed style are already connected to their respective pins. 34 00:02:22,890 --> 00:02:27,720 Just to verify whether this duo are connected to their respective high rate, we go to a boot camp and 35 00:02:27,720 --> 00:02:32,160 you could see the two checkmark for full release and force, which is right. 36 00:02:32,170 --> 00:02:39,000 So this confirms that this new boots that we have on any site, UPI or IP is already been connected 37 00:02:39,000 --> 00:02:41,160 to their respective refresh rate. 38 00:02:41,220 --> 00:02:44,220 So we do not need to perform an intermediate synthesis. 39 00:02:44,220 --> 00:02:48,000 We could directly go ahead and grass for generation of objects, too. 40 00:02:48,240 --> 00:02:53,430 So this will automatically perform synthesis and implementation and generation of objects which could 41 00:02:53,430 --> 00:02:54,210 be used to. 42 00:02:55,130 --> 00:02:56,030 Program I.