1
00:00:00,090 --> 00:00:07,200
We already looked into this kind of Daimler media watchdog camera that we have it sync processing system,

2
00:00:07,620 --> 00:00:08,790
some of them are private.

3
00:00:08,910 --> 00:00:11,670
Others are the independent blog that you have to.

4
00:00:14,670 --> 00:00:21,760
Now the other kind of the time was that we could always utilize with the sync is the vehicle timer,

5
00:00:21,780 --> 00:00:22,190
right?

6
00:00:22,530 --> 00:00:29,190
These are basically an eyepiece and we'll be communicating all the options as well as data utilizing

7
00:00:29,190 --> 00:00:30,000
any kind of.

8
00:00:30,350 --> 00:00:35,260
So we have two popular bill timers available with us.

9
00:00:35,280 --> 00:00:36,900
It may be any exciting.

10
00:00:38,520 --> 00:00:41,940
Timer ordered me to be an exciting time, this washed off time.

11
00:00:42,180 --> 00:00:50,020
So these are the two popular blips that we frequently will be discussing most on any side timer looking

12
00:00:50,220 --> 00:00:54,930
right as we progress, but there will also be considering an inch of usage with any excitement.

13
00:00:54,940 --> 00:00:55,200
All right.

14
00:00:55,200 --> 00:01:01,980
So when we add any timer over here, so you see there are various bins available today, so do not worry

15
00:01:01,980 --> 00:01:03,330
about things much.

16
00:01:03,810 --> 00:01:05,940
We'll just be utilizing a single timer, right?

17
00:01:05,970 --> 00:01:12,360
So for us, when we specified the timer counted basically equal to the number of timer that you have

18
00:01:12,360 --> 00:01:14,670
minus once a year when we consider a timer.

19
00:01:14,670 --> 00:01:20,460
But whenever you see timer, count her number there, you just need to specify the number of timer that

20
00:01:20,460 --> 00:01:21,090
you have added.

21
00:01:21,090 --> 00:01:23,900
Yet we have one minus one that is you, right?

22
00:01:23,910 --> 00:01:28,890
So when you enable timer to so the number of times that you contribute is to the two minus one will

23
00:01:28,890 --> 00:01:30,260
be your timer counting number.

24
00:01:30,270 --> 00:01:36,160
So whenever you unless you Gail, be finding this parameter, you just need to calculate like this rate.

25
00:01:36,520 --> 00:01:38,380
That's the thing will be keeping at this.

26
00:01:38,490 --> 00:01:42,690
OK, now you see that you have a sleek st of is on any timer.

27
00:01:42,720 --> 00:01:44,070
OK, lock and reset.

28
00:01:44,520 --> 00:01:51,510
So we need to add a master except to the same processing system, and then only we could be able to

29
00:01:51,510 --> 00:01:52,290
connect them to get.

30
00:01:53,770 --> 00:01:56,410
So let me just reconfigure and think processing system.

31
00:01:56,740 --> 00:02:02,800
We go to a special configuration and then we enable General Motors Mastery Ixi interface.

32
00:02:03,070 --> 00:02:07,630
This is the first thing that we do and along with this, we also need to enable a reset and clock,

33
00:02:07,630 --> 00:02:07,900
right?

34
00:02:08,320 --> 00:02:11,910
So we go to agenda and here we have a reset, right?

35
00:02:11,920 --> 00:02:17,650
And if we go to a clock configuration, there be a provision to either build fabric clock right to the

36
00:02:17,650 --> 00:02:20,590
operating frequency for us is 50 hours.

37
00:02:20,590 --> 00:02:25,630
In fact, we could change this as per hour requirement to really just make it 100 megahertz at the exact

38
00:02:25,750 --> 00:02:31,330
timer will now operate at 100 Maggart, so that could be used to competition for the right.

39
00:02:31,720 --> 00:02:32,980
So let it just hit Ducky.

40
00:02:34,040 --> 00:02:40,370
Now we have Mastery S.A.C. report added clock, and we started it as soon as you do this, you immediately

41
00:02:40,370 --> 00:02:42,080
get connection automation, right?

42
00:02:42,080 --> 00:02:47,480
So we'll just be performing an action automation and this will automatically add visit to for us, as

43
00:02:47,480 --> 00:02:53,990
well as the excitement of any great will not be utilizing any one, any of an output pin that we have

44
00:02:53,990 --> 00:02:58,190
a site on any excite you dominantly how we utilize.

45
00:02:58,190 --> 00:02:59,900
And he said, I'm going to challenge you to relay.

46
00:02:59,900 --> 00:03:05,270
That is what we are discussing right in will be our understanding later on as we put all of this in

47
00:03:05,270 --> 00:03:06,350
an interest section, right?

48
00:03:06,650 --> 00:03:12,080
So you could see I blog because I do not consist of any board for which we need to specify a consumer.

49
00:03:12,080 --> 00:03:15,440
All the codes already been connected to the respective pin.

50
00:03:15,650 --> 00:03:18,740
So we just need to go ahead and generate an actual wrapper.

51
00:03:18,890 --> 00:03:19,250
OK.

52
00:03:19,340 --> 00:03:25,070
And once that happens, in addition is successful, we just need to go ahead and perform generation

53
00:03:25,070 --> 00:03:25,570
of objects.

54
00:03:25,830 --> 00:03:30,620
Right now, there's a commentator that you get with an idea, but we haven't configured anything, so

55
00:03:30,620 --> 00:03:33,200
we do not need to worry much about this, right?

56
00:03:33,770 --> 00:03:37,340
So let me just go ahead and try to turn the picture.