1
00:00:00,150 --> 00:00:05,850
Now what we'll do is we'll try to understand how we utilize you and you like with an MRI, right?

2
00:00:06,240 --> 00:00:10,240
So we'll go ahead first and we will just be keeping here, you like.

3
00:00:10,500 --> 00:00:14,670
This is for debugging purposes, whatever we sing or communicate with.

4
00:00:14,670 --> 00:00:22,020
And you could be debug with the help of and displaying the values on a console will be keeping you like

5
00:00:22,050 --> 00:00:23,190
one for that purpose.

6
00:00:23,220 --> 00:00:23,520
OK.

7
00:00:23,760 --> 00:00:29,530
This is the only thing that will be keeping you not blocked using now to in the ways that you work like

8
00:00:29,530 --> 00:00:29,900
Typekit.

9
00:00:30,210 --> 00:00:35,280
OK, first we'll just go ahead and look for each say you are tight, OK?

10
00:00:35,400 --> 00:00:38,640
And then that we will be adding on to our blog.

11
00:00:38,990 --> 00:00:45,420
OK, now if you just explore the pin that we have on and you are going to visit sites and you will be

12
00:00:45,420 --> 00:00:47,610
connecting this to zing processing system.

13
00:00:47,740 --> 00:00:52,860
OK, and this since it have a smooth interface, we'll just be adding a master individual here.

14
00:00:52,860 --> 00:00:55,300
Right along with that, we are also required to lock reset.

15
00:00:55,320 --> 00:01:00,200
So let's just go ahead and try to reconfigure IP, right?

16
00:01:00,210 --> 00:01:05,190
So if we go to special configuration in general, that we have probably should try to reset.

17
00:01:05,520 --> 00:01:09,600
We're just going to enable clock reset and will enable it, right?

18
00:01:09,870 --> 00:01:13,050
So this will be really sick for logic.

19
00:01:13,110 --> 00:01:15,030
Then we also require to lock, right?

20
00:01:15,450 --> 00:01:20,760
So we go to plot configuration, build fabric, block and this provide us up right.

21
00:01:20,760 --> 00:01:26,430
Along with this, we also required a sleeve of my student office where we could connect the saving DVDs

22
00:01:26,430 --> 00:01:28,700
of, say, lightweight.

23
00:01:28,890 --> 00:01:31,640
So we'll go ahead again to use field configuration.

24
00:01:31,650 --> 00:01:36,890
And here we have GP master u.s.-iraqi.

25
00:01:36,900 --> 00:01:40,650
So we'll just enable one of an interface and then we'll hit OK, right?

26
00:01:40,920 --> 00:01:46,800
So that this modification you could see we have a master in the wizard, which could be used to connect

27
00:01:46,800 --> 00:01:49,380
to the slave interface of your plate.

28
00:01:49,410 --> 00:01:50,820
Then we have a block and reset.

29
00:01:50,910 --> 00:01:56,110
Right now, we could proceed for connection automation.

30
00:01:56,400 --> 00:02:01,350
So we would just be connecting our exchange office as well as block and reset.

31
00:02:01,380 --> 00:02:01,650
Right?

32
00:02:02,160 --> 00:02:09,540
If you just read and real, you could see we have a reset block, which has been added and you say interconnect.

33
00:02:09,540 --> 00:02:13,200
Then finally, we have you walk over here right now.

34
00:02:13,200 --> 00:02:19,140
What you would do is you would just delete this you IP, which has been specified over here.

35
00:02:19,380 --> 00:02:21,270
Now, if you go to a few taps or.

36
00:02:22,260 --> 00:02:29,790
From our previous discussion, we already know that we do not have any high event been on a bull which

37
00:02:29,790 --> 00:02:31,590
could be connected to this.

38
00:02:32,130 --> 00:02:34,170
You are actually great in that case.

39
00:02:34,530 --> 00:02:41,660
For example, what we'll just be doing is we'll be discussing what you need to do if you have an and

40
00:02:41,700 --> 00:02:43,310
water like this with you, right?

41
00:02:43,320 --> 00:02:45,000
So how you interface, right?

42
00:02:45,390 --> 00:02:47,820
So we're not for the market could be utilized.

43
00:02:47,860 --> 00:02:54,110
OK, so let's assume we utilize be more TV and then we can take this tubing.

44
00:02:54,120 --> 00:02:56,650
That is the and it's A..

45
00:02:56,830 --> 00:02:57,020
Right.

46
00:02:57,030 --> 00:02:59,580
So how do we do that that you'll be understanding?

47
00:02:59,580 --> 00:03:02,540
And later on, we will just be utilizing in a loop?

48
00:03:02,880 --> 00:03:10,720
So you have a complete idea about how you use benefited you in an EMI?

49
00:03:10,830 --> 00:03:11,100
Right?

50
00:03:11,970 --> 00:03:16,320
So here are Reg, and I will be just to understand how we perform up to trapping.

51
00:03:16,350 --> 00:03:16,670
OK.

52
00:03:16,920 --> 00:03:17,370
No.

53
00:03:17,370 --> 00:03:20,550
Writing an application will be standing in the next example.

54
00:03:20,790 --> 00:03:28,710
So we'll just be deleting this, which is what you did by default and will be clicking on an IIX, OK,

55
00:03:28,980 --> 00:03:30,300
and making it text.

56
00:03:30,630 --> 00:03:33,390
So let me just go ahead and make, et cetera.

57
00:03:34,800 --> 00:03:38,250
So we'll just be selecting an artist will be making a decision.

58
00:03:38,490 --> 00:03:38,820
OK.

59
00:03:39,120 --> 00:03:43,590
And we'll also be selecting ADX and we'll be making it extend right now.

60
00:03:43,590 --> 00:03:49,520
You could see we have six, so we'll just be changing the name from artists and exclusive to graphics

61
00:03:49,860 --> 00:03:52,880
and from eccentric scored zero, two to six.

62
00:03:52,890 --> 00:03:58,300
So you get an external group properties over here, which could be used to change the.

63
00:03:58,770 --> 00:03:59,100
Right?

64
00:03:59,790 --> 00:04:07,110
So now you will see the boards which are present in our design is the show which are all really connected

65
00:04:07,110 --> 00:04:08,400
to their respective group.

66
00:04:08,850 --> 00:04:16,680
Only thing that we need to handle is the likes and right now will go ahead and try to first validate

67
00:04:16,680 --> 00:04:17,220
our design.

68
00:04:17,250 --> 00:04:18,810
So let me just validate design.

69
00:04:19,950 --> 00:04:25,980
So this is all are the critical vulnerability to media, but we haven't done it in configuration water,

70
00:04:26,340 --> 00:04:28,380
so we do not need to worry about this.

71
00:04:29,190 --> 00:04:33,540
And the design is just fine, so we'll go ahead and create an issue of that.

72
00:04:34,720 --> 00:04:40,180
OK, so we already know that this is a highway which will be connected to one of the B mark.

73
00:04:40,450 --> 00:04:46,020
OK, so we b it will be connected to it and will be connected to it.

74
00:04:46,060 --> 00:04:49,000
So this will be the only contribution that we need to do.

75
00:04:49,330 --> 00:04:55,540
And then we are ready to perform the developing often sequel, right?

76
00:04:55,810 --> 00:04:57,010
So let me just go ahead.

77
00:04:57,040 --> 00:04:58,540
No wire effort is ready.

78
00:04:58,750 --> 00:05:05,770
So since we do need to specify the boot for products at the expense that we could not directly prosecute

79
00:05:05,770 --> 00:05:09,220
rendition of a bitstream, we will be performing a synthesis.

80
00:05:09,450 --> 00:05:15,820
So this will give us an eye opening view where we could specify the boot, where we will be connecting

81
00:05:15,820 --> 00:05:16,540
RDX and.

82
00:05:18,600 --> 00:05:20,070
So our synthesis is complete.

83
00:05:20,400 --> 00:05:22,580
Just open up synthesis design, right?

84
00:05:23,100 --> 00:05:28,530
So here we'll be getting an information about all the pools which are connected to their respective

85
00:05:28,530 --> 00:05:28,770
pin.

86
00:05:29,100 --> 00:05:34,470
And along with that, we'll also be getting an eye opening view where we can specify the pool, where

87
00:05:34,470 --> 00:05:36,670
we want to connect the rest of the pool.

88
00:05:36,690 --> 00:05:36,960
Right.

89
00:05:37,230 --> 00:05:42,600
So you could clearly see the idea and say you are already been fixed or something, which is not been

90
00:05:42,600 --> 00:05:45,000
connected to the respective coaches that you worked.

91
00:05:45,390 --> 00:05:46,070
That's right.

92
00:05:46,080 --> 00:05:48,740
So we have a two bench, which is ex ante.

93
00:05:49,320 --> 00:05:57,120
Now what we do is we since we connected, I do we to do it on inside of it.

94
00:05:57,300 --> 00:05:57,630
OK.

95
00:05:57,900 --> 00:06:06,030
So we will just be specifying V8 for optics and eight four eight two three eight four eight six.

96
00:06:07,590 --> 00:06:12,410
OK, so Gabby is not available in tables at seven one zero.

97
00:06:12,430 --> 00:06:12,760
OK.

98
00:06:12,970 --> 00:06:17,910
And since we have selected this photo, it is suing us and invalid penis.

99
00:06:18,280 --> 00:06:20,500
So let us just use and see.

100
00:06:20,500 --> 00:06:26,100
Instead of GB to be 15 and WP Green will be the two pins that we will utilize, right?

101
00:06:26,110 --> 00:06:29,590
So we will just be specifying here the 15.

102
00:06:29,830 --> 00:06:30,190
OK.

103
00:06:30,460 --> 00:06:33,070
And then we have W 50, right?

104
00:06:33,130 --> 00:06:37,910
So these are the two points where we'll be collecting likes and dislikes and you'll just be enjoying

105
00:06:37,930 --> 00:06:40,570
the level two LV CMOs 30.

106
00:06:40,850 --> 00:06:41,130
Right.

107
00:06:41,140 --> 00:06:44,440
So this will be the modification that we're going to do now.

108
00:06:45,190 --> 00:06:46,040
We connected.

109
00:06:46,200 --> 00:06:48,940
Are you locked into phase two, though?

110
00:06:49,510 --> 00:06:53,380
You are right utilizing the boot mapping.

111
00:06:53,380 --> 00:06:58,680
And once this process is said, we will just be sitting for generation occupancy rate.

112
00:06:58,690 --> 00:07:02,170
So this will be a procedure where you want to interface.

113
00:07:02,170 --> 00:07:05,870
You are external, you are tired of it, OK?

114
00:07:05,890 --> 00:07:12,190
Or it may be a new are that are available on in bold OK, which could be connected to an e-mail or which

115
00:07:12,190 --> 00:07:15,280
could be connected to any, say peripheral.

116
00:07:16,000 --> 00:07:21,030
So this will be your process when you want to utilize any e-mail that you are.

117
00:07:21,040 --> 00:07:25,080
So you just need to go ahead and make the you work the next.

118
00:07:25,600 --> 00:07:25,960
OK?

119
00:07:26,200 --> 00:07:33,400
And then depending on where you connect and hide it, if it is an extension or where you have, you

120
00:07:33,400 --> 00:07:35,730
are you are going to have a label on inside of it.

121
00:07:35,950 --> 00:07:38,620
You just need to specify the package being over here.

122
00:07:38,710 --> 00:07:38,980
Right.

123
00:07:39,310 --> 00:07:46,630
So here, since we do not have the you acting directly on the board, OK, we are demonstrating this

124
00:07:46,640 --> 00:07:51,720
exact example utilizing the external left, the 02:32 right.

125
00:07:51,970 --> 00:07:57,940
But if you have an onboard fence, which could be x this phone and hardware, then we could just proceed

126
00:07:57,940 --> 00:08:01,230
and specify the pins who are here right now.

127
00:08:01,240 --> 00:08:08,330
What we want to do is to demonstrate the C application node since we do not have NFC and critical hardware

128
00:08:08,330 --> 00:08:08,800
with this.

129
00:08:09,840 --> 00:08:15,480
But still, we want to demonstrate an entire school, so we'll be understanding how we proceed with

130
00:08:15,480 --> 00:08:16,500
that in the next.