1
00:00:00,150 --> 00:00:07,080
So now what we got to do is we'll start discussing about damages of radius, it's OK and we'll be dividing

2
00:00:07,080 --> 00:00:13,170
our spirit into three categories, so it may be a simple or intermediate case better than a complex

3
00:00:13,170 --> 00:00:13,950
benefit rate.

4
00:00:14,430 --> 00:00:18,770
So we'll progress from simple, very, very to the complex, right?

5
00:00:18,870 --> 00:00:25,140
So complex paper basically means that you need to work it out within operating rules and then you need

6
00:00:25,140 --> 00:00:31,530
to control certain registers and then you have finally operation with the veto, right?

7
00:00:31,770 --> 00:00:39,030
But when we consider a simple paper so you do not have different modes which you need to configure.

8
00:00:39,270 --> 00:00:44,070
Just have a simple data which you could either eat or drink.

9
00:00:44,370 --> 00:00:50,340
So as you probably saw, we will be discussing what other different simple paleface that we will be

10
00:00:50,340 --> 00:00:53,760
discussing, as well as the intermediate and complex benefit.

11
00:00:53,850 --> 00:00:54,120
Right?

12
00:00:54,810 --> 00:01:01,290
So all of the daily driver for any of the wafers could be initialized in a common so.

13
00:01:02,360 --> 00:01:08,090
When we consider a different paper that we could add to a think pricing system, but all of them could

14
00:01:08,090 --> 00:01:13,490
be initialized utilizing a standard former rate, so we will just be understanding what is the standard

15
00:01:13,490 --> 00:01:19,400
for rent that we have and this is just specific to initializing are drivers for a good look.

16
00:01:19,400 --> 00:01:26,870
And then later on, we could add the APIs from the to OK and then we could build up our application.

17
00:01:26,880 --> 00:01:33,140
So the logic for building an application will be better, but it will not be consumed for think that

18
00:01:33,140 --> 00:01:40,850
if they did, but something which will remain constant for all the paper independent of type is how

19
00:01:40,850 --> 00:01:42,470
we initialize the process, right?

20
00:01:42,740 --> 00:01:47,600
So we'll start discussing the typical format that we have to initialize.

21
00:01:47,600 --> 00:01:48,730
A New York will pay for it.

22
00:01:49,040 --> 00:01:58,220
And once we have that in our mind, we could actually proceed surfing through the different API that

23
00:01:58,220 --> 00:01:58,610
we have.

24
00:01:58,610 --> 00:02:02,660
And then he declined, and then we could use them to build up an application rate.

25
00:02:03,020 --> 00:02:06,560
So we do have a pay later.

26
00:02:06,740 --> 00:02:11,390
All the data will be stored in a structure, right?

27
00:02:11,420 --> 00:02:17,110
So for that specific purpose, we will be having an independent structure, right?

28
00:02:17,120 --> 00:02:17,450
So.

29
00:02:17,860 --> 00:02:21,980
So you we have structure one, right?

30
00:02:22,310 --> 00:02:26,330
And that will be storing all the data related to a payphone.

31
00:02:26,360 --> 00:02:34,280
So if we assume there is a zoom that we are utilizing a GPO, so all the data that is required to initialize

32
00:02:34,310 --> 00:02:38,180
and use the GPI will be inside this structure.

33
00:02:38,250 --> 00:02:43,500
OK, so usually it will be new thanks to the AI, right?

34
00:02:43,520 --> 00:02:45,740
So this is how we'll be naming this structure.

35
00:02:46,470 --> 00:02:51,020
OK, and that we could easily know by looking into a triglyceride.

36
00:02:51,260 --> 00:02:58,240
So we have a lot of structure and then to inside this structure, we will be having a different data,

37
00:02:58,520 --> 00:02:58,760
right?

38
00:02:59,120 --> 00:03:06,270
So inside this structure, we will be having multiple things which are necessary for our benefit.

39
00:03:06,350 --> 00:03:06,620
Right.

40
00:03:06,980 --> 00:03:11,830
So inside this structure, we have one more structure, which is called structure, right?

41
00:03:11,880 --> 00:03:16,910
So again, this will be GPI and config.

42
00:03:17,090 --> 00:03:21,560
These are the two things which will be present almost in all the phase, right?

43
00:03:21,920 --> 00:03:26,480
So the name may be different for this structure, depending on the benefit of that you are utilizing,

44
00:03:26,690 --> 00:03:28,340
the structure name will be different.

45
00:03:28,610 --> 00:03:33,090
But inside this structure, we have one more structure, which will be conflict structure, right?

46
00:03:33,110 --> 00:03:41,000
So it will be usually Nemetz ex OK, and then you have your pace at any rate.

47
00:03:41,000 --> 00:03:42,740
So this will be for a structure.

48
00:03:43,100 --> 00:03:45,040
And then inside this, OK?

49
00:03:45,320 --> 00:03:51,290
One of the member is again a structure which is conflict.

50
00:03:51,350 --> 00:03:55,760
Right now, there may be multiple structure which are bridging, but something which will be common

51
00:03:55,760 --> 00:03:57,040
for all the is.

52
00:03:57,070 --> 00:04:00,170
This does expect a space-faring structure.

53
00:04:00,170 --> 00:04:07,700
And then inside this, we have one more structure, which is experimental conflict structure right now

54
00:04:07,700 --> 00:04:13,100
to initialize grey fitting correctly, we need to correctly operate this.