1
00:00:00,060 --> 00:00:06,750
So now what we'll do is we'll consider how we use a multi-channel X AGP IP right to we already constructed

2
00:00:06,750 --> 00:00:08,250
a basic block design.

3
00:00:08,280 --> 00:00:11,820
Now what we're going to do is since we want to interface and the essay.

4
00:00:13,050 --> 00:00:20,990
CPPIB will go ahead and will enable our mastery, Alexei G.P.S. to procreate, so we go to gender and

5
00:00:20,990 --> 00:00:24,380
we will first be enabling a clock reset.

6
00:00:24,410 --> 00:00:29,730
This is the first step, then we will enable a master exchange office.

7
00:00:29,750 --> 00:00:34,250
OK, and the last thing that we require is to add a clock for our fabric.

8
00:00:34,310 --> 00:00:38,900
So we go to clock configuration plus fabric clock and will select the clock rate.

9
00:00:38,900 --> 00:00:41,120
So these are the three things that are required.

10
00:00:41,480 --> 00:00:44,030
OK, and then we'll proceed.

11
00:00:44,120 --> 00:00:48,170
Adding Ixi GPI IP right now.

12
00:00:48,170 --> 00:00:52,370
First, we'll configure our VIP and then we'll perform collection automation.

13
00:00:52,610 --> 00:00:56,090
So will double click on any AGP IP.

14
00:00:56,480 --> 00:01:01,700
So it's important for us is Channel one will be connected to Switch and Channel two will be connected

15
00:01:01,700 --> 00:01:02,690
to an entity, right?

16
00:01:02,960 --> 00:01:06,650
So go ahead to GPI zero, which represent our first channel.

17
00:01:07,310 --> 00:01:09,860
This will be connected to Switch, right?

18
00:01:09,860 --> 00:01:16,700
So the IP switches for it and Channel two esperar attention should be connected to any degree, right?

19
00:01:16,700 --> 00:01:21,230
So we'll go in and will connect it to forbid any right now.

20
00:01:21,230 --> 00:01:26,270
You could see it automatically display that we have added to China's whilst will be there.

21
00:01:26,270 --> 00:01:29,920
We can change the way we connect, right?

22
00:01:29,960 --> 00:01:33,950
We'll just talk and then we could proceed for connection automation.

23
00:01:33,950 --> 00:01:39,680
So we'll select all the interfaces and we're just talk right now.

24
00:01:39,680 --> 00:01:42,080
You could see this will automatically add the.

25
00:01:43,170 --> 00:01:48,870
The reset IP, which would be used to apply the reset to all night, means that we have in our design,

26
00:01:48,870 --> 00:01:49,820
then we have any.

27
00:01:50,490 --> 00:01:55,500
And then finally, are IP right now you could already see we have for this two are already connected

28
00:01:55,500 --> 00:01:56,640
to their respective brain.

29
00:01:56,640 --> 00:02:01,680
And this too, if you just analyze the that are all really connected because you could see any lomac

30
00:02:01,680 --> 00:02:03,420
on both LDA as well as switches.

31
00:02:03,540 --> 00:02:03,810
Right?

32
00:02:04,500 --> 00:02:10,110
So without worrying much, we will first proceed to generation of and they still rapid.

33
00:02:11,220 --> 00:02:16,920
So once the rapper generation is successful now, we already know that all the ports are connected to

34
00:02:16,920 --> 00:02:17,910
their respective pin.

35
00:02:18,000 --> 00:02:20,960
We will directly proceeding for a generation of.