What are we going to do is we all understand how we use the APIs, which is an entity together with
an EMI will get, so this will add more insight into whatever we have discussed about any rate.
So we already have this in the script.
The thing that we're going to change is the project need, as well as the project that you will just
copy this and elbow two of the related and this will combine, right?
So this will automatically create a project director for us.
And along with that, it will outside the fundamental block data, OK, which will be modifying such
that we hired an LLC and the APIs produced within the zinc processing system along with any right.
The fact to remember is when we are considering an e-mail, so we are planning the signal that we have
in the processing system to transmit from an FPGA fabric, right?
And then it becomes mandatory that we specify the constraint.
So as we complete are still rapid generation.
We will be performing a synthesis will be specifying a and then only we will be proceeding to our generation
of objects.
So we already have a fundamental block design or here will just be reconfiguring.
It says that we had a leading VIP, such as working with an MRI.
Now we have a few really, which are present on the table.
And along with that, we are planning to use for VIP switches.
So Total required eight signals, right?
So we go to an email configuration.
Here we have a nice day free where we will just enable GPI, am I?
And that will be enabling EMI.
So the vict that we'll be using is it for for the elderly side, for for the APC?
Just say we could disable USB, reset a nice grad school here because we do not require right to click
OK?
Now this will add you over here, so we'll just make it extend.
Right now, if you just go to a that.
So even though we see a ladies end button over here, but did that not directly connected to, but then
we need to manually specify a right.
So let me just go ahead and change this to.
GP right now, remember this, people do not understand whether we wish to connect or first for Elizabeth
banks to the elderly, or is it predominantly depending on how you specify construing OK, as you specify
a condition, you need to remember which all signals or recall number from this vector.
You considered poor and elderly and then the number which you considered for a gap which right?
So we have an ID with us right over here.
So we already know EMI start from fifty four.
So if we assume that the list before that, we are connecting to a switch.
So remember that for a switch when we specify the pin number in an SDK will be utilizing fifty four,
fifty five to six, fifty seven and so on.
And so remember, this is all reading right now will go ahead and will try to perform a standard approach,
right?
So will allow you vital to generate and ensure that before us, this is the first step that we follow.
Now here, one thing is clear that the GPI of that we have over here is not directly connected to Barton
980, and this could actually be verified as we perform a synthesis, right?
So once I wrapped generation assets, this will go ahead and perform a synthesis.
So this is a mandatory step when your pool is not connected to our respective hardware.
So our synthesis is completed now, we just had done open synthesis is.
OK, this will allow us to specify a new planning, right?
Now here you will see how all the people presented in our design.
So two of them that is DDR and fixed, you are already been fixed to the respect du site, but something
where we need to specify the code is the GPIO rule that we have had to look at, and that is how we'll
be driving the processing system signals to the switch and with the help of any of my right.
So let me just go ahead and try to add the to here, right?
So we could just select the level to be able to see more certainty.
And then first for release zero, one, two and three.
OK.
So once we connect C2 to the switch, so remember when we write an SDK code, we have our switches from
fifty four fifty five fifty six point fifty seven.
Okay, so we'll just go ahead to annex despite.
Now here, you could clearly understand that we want to connect such as this is to the lesbian gay rights,
the is like G50, then we have b 50 W 13 D 16 right to decide the series of group that we need to mention.
We'll just go ahead and will assume that Switch zero will be the least bit better off by or external
pool.
Then we have B 50 the next book, right?
Then we have W30 and the last one is this right?
These are the four reports that we have.
So G50 be 50 W 13, 1969 for LSD.
We have em 14 and 15.
OK.
49.
We'll just be specifying them here.
Right.
So the first lady is acting 40.
OK, then the next one is and 15.
OK, the next one is 40.
And last one is the right, so that remember that first four are the switches and then we have an immediate
two digit numbers are very important because EMI starts at fifty four.
B number will start at 54.
So 22 will be fifty four.
Which one will be at fifty five?
Switch two will be at fifty six and Switch three will be at fifty seven.
Similarly, a leading zero will be fifty eight, but will be fifty nine and Li two will be sixty and
LCD three will be sixty.
Right.
So as we complete this process, you will now see all of the codes which are present in our design,
our fixed rate.
We'll just see this constraint fight.
So press controls and they just need this job done next.
So once this process is completed now, we could go ahead and generate the bitstream for our design.
So let's just go ahead and try to generate the bits.