What we'll do is we'll understand how we use an e-mail with the GPO IP, right, so we already created
a project.
Now we already know that we have a fifty four email open and 64 e-mail.
We already discuss about an email.
OK, baby, use the X AGP AYP, OK, and then rotate signal for augmenting grassing system to a lady
utilizing an email.
With this specific, you will be covering how we roll the signal.
OK, and what is that new type procedure that you have to allow the signal from?
Yes, to the end it is utilizing year, right?
We already created a project here.
Let's just proceed with creation of a block design.
So we'll just click on Create Blog Design, and then we'll stick to the default name that it's design
with and will hit.
OK, right here we proceed with the zinc processing system, right?
And then we will be performing a block or permission to selectively add the word reset along with the
zinc passing system, and then will be disabling the foods that we do not require, right?
So we'll just double click to configure.
So we have our baby line where you could see all the ports which are enabled when we're pliable, so
we'll just disable it.
Then you esposito SDC.
You will keep you like this.
Allow us to see whether device initialization is successful or not.
OK, and then we have a GPI.
Who am I, right?
So this booth, the options are there will just be temporarily, I'm taking it, we will be going to
an email configuration and here we have an option to enable GPI with EMI, right?
We'll just be clicking on GPI.
Yeah, my email.
OK, and then we will again take EMI here.
We want to utilize EMI in the previous case.
We are interested only in that GPI.
So we in the previous case, we utilize any say OK, here will be selecting EMI GPI.
OK, end of it.
So we want to conclude the two eldest this led to we in fact have for elderlies on the board, so we
could actually select for this, right?
So here the witness for OK.
And we have enabled EMI, right?
So it will just be disabling this to pay for it also because we do not require them to be enabled.
What?
And then we have GPI with EMI EMI, right?
So that it just go ahead and click, OK.
Now this will remove all the benefits that we do not want to use.
And along with this, we also need to remove the master say interface that has been added by default.
So we'll just go to the configuration here.
You have an option to disable any AGP, right?
And if you go to the general, you also get an option to disable the reset rate, so will be disabling
the reset.
And the last thing that we need to do is to disable the clock, right?
So let's just go to when clock configuration you have built fabric block and then this would be saved.
Great.
So click OK.
Now, this will remove all the benefits that we do not want to say.
So you could see we have our zinc crossing system.
OK, so the idea which is added by default and we required the state, which include you are and then
you have GBI, which will be routing utilizing the yes right.
That is the fabric.
So first thing that we'll do is we'll be making it external so that we could specify the constraint
and drought, the signal from the right.
We'll be updating the name of a boat so we would just select the boat.
OK, and then you see an external interface property here.
We'll just be naming this as entity, right?
So we selected the vendors, folks who will be controlling for hit enter.
This will automatically update the name of this.
So this is what we required for this specific.
We do it just by generating a layout and performing validation of our design.
So it's validation.
It's successful.
We connected all the mandatory connections to the required rate, so we'll just go ahead.
And now if you analyze the butat.
OK, so this elite is not being connected to anything, right, and that could be verified as we perform
a synthesis, right?
So we already knew that DDR and stiU are connected to the respective ports.
OK.
But the reality which we made an extender is not being connected by default to an intruder, and that
could be verified if you just stand laser butat.
So you could still see that the circle that we have for for it is still you.
So we haven't connected this to an end.
So let it just go away and try to the rapper for this, right click on the block and say, and so will
allow the idol to create a wrapper for us right now once arapaja generation is successful.
OK, and if it is set as a model, we could proceed and perform synthesis of design.
So just click on runs and this is again, keep the default option.
And.
So this will take a finite amount of time to complete a synthesis.
And then we'll be able to analyze all the proof for which we required to specify a constraint and the
remaining code for which we do not need to specify you.
So one side synthesis is completed, we will just be clicking on open synthesis site.
OK, so this will give us an access to the device.
Die, and along with that, all the skill that you have in design, right, so you could see now that
we have a DDR five full five seven six, this is one of a quote and you could actually see if you just
explode.
So these are already fixed.
That is, we do not need to specify any constraint for it.
Similarly, the fixed style which include and you what?
So that is also connected or fixed.
So for them also, we do not need to specify any Consti.
Now, if you consider the GPIO, which we made an external for that specific quote, we do not have
any specific location where we want to connect great.
And for that reason, we need to specify the specific site on which we want to connect, right?
We'll just be changing the default level to let's assume we see more certainty.
We'll explore the.
So we have chosen the EMI over to be Fobbit, right?
So we have a zero one, two and three.
So this will be connecting to the LCD that we have on set.
So if you just explore and next, you see fight so far and the elderly zero is at the no aim.
40.
OK, then we have m 14 and 15 g 14, and the two will be utilizing the same port.
OK, so we have m 14, then we have M 15.
OK, then g 40.
There's the next sport VIN number that we have.
The last one is DNA.
So these are the full VIN numbers that we have for our elderlies on the right.
So once we do this now, you would see all the polls that are present in our design have been fixed
to the specific being location, right?
So once this is done, just need to click on controls.
So once you click on controls, this will ask us that do you want to see the X justified?
So we do need to see and it's justified.
OK, so we'll just be adding names stop.
And this will have an extension of an x GC.
So this will add all the newly added constraint in, and it's justified.
So if you just explore this step, OK, and then if you analyse the constrained folder, OK, so you
could see the new file, which is added bias that is out-of-context.
You see, and these are all the ports which we want to route utilizing the programmable logic.
And these are the pain location where we want to connect, right?
So once this process is completed, we will go ahead without worrying much about an intermediate step
and perform condition of a bit, right?
So this will be the only difference that we have when we specify the full switch required to specify
a constraint, right?
If we do not require to specify any offer considering, we could directly proceed for translation of
which.