1 00:00:00,150 --> 00:00:05,890 Let us start working with an email, first thing that we need to do is to find out which all leads and 2 00:00:05,890 --> 00:00:10,220 buttons are connected to our pricing system with an email, right? 3 00:00:10,530 --> 00:00:15,750 So that could be easily followed by looking into a reference manual of the specific food that you are 4 00:00:15,750 --> 00:00:16,320 utilizing. 5 00:00:16,320 --> 00:00:21,450 So here I am on a reference manual page of boards at seven one zero. 6 00:00:21,450 --> 00:00:23,310 So this is the view that I am utilizing. 7 00:00:23,490 --> 00:00:30,270 OK, now if I just go ahead and understand an architecture so that I have a provision to see all the 8 00:00:30,270 --> 00:00:34,380 54 I options that are connected to a pricing system, right? 9 00:00:34,770 --> 00:00:40,590 So I need to just look for that UPI open because there are already I switch blocks, right? 10 00:00:41,040 --> 00:00:44,660 So pin number seven is connected to any league, right? 11 00:00:44,670 --> 00:00:50,540 So we do have one of an NLD, which is directly connected to a pricing system with an email interface, 12 00:00:50,550 --> 00:00:50,820 right? 13 00:00:50,830 --> 00:00:53,160 Then we have the next one. 14 00:00:53,190 --> 00:00:54,180 If you're considered. 15 00:00:55,500 --> 00:01:00,720 PIN number 50 and 51, so am 50 and 50 51 is connected to a. 16 00:01:01,140 --> 00:01:01,410 Right. 17 00:01:01,950 --> 00:01:07,440 So, for example, would be predominantly working legislative on an elite keeping things simple, and 18 00:01:07,440 --> 00:01:12,360 then we could proceed to understand how we could use buttons as well as a digit together rate. 19 00:01:12,750 --> 00:01:16,440 So at least one of the ladies connected directly to our pricing system. 20 00:01:16,850 --> 00:01:19,390 OK, and the pin number is seven. 21 00:01:19,410 --> 00:01:19,710 Right? 22 00:01:20,160 --> 00:01:26,670 So remember this because TAC will be requiring when we write and software code. 23 00:01:26,790 --> 00:01:27,090 Right? 24 00:01:27,480 --> 00:01:28,730 So let's proceed with. 25 00:01:29,550 --> 00:01:29,840 Right. 26 00:01:30,360 --> 00:01:36,840 We already developed this disclaimer that will give us a fundamental part of it, which could be utilized 27 00:01:36,840 --> 00:01:38,010 to build up an application. 28 00:01:38,010 --> 00:01:42,180 So I'll just copy this OK first and just change this to 12. 29 00:01:42,390 --> 00:01:42,780 OK. 30 00:01:42,960 --> 00:01:46,920 Because we will be creating a new project and then I'll just be copying. 31 00:01:46,920 --> 00:01:50,640 There's going to be vado and pasting it in it. 32 00:01:51,390 --> 00:01:51,650 Right? 33 00:01:52,140 --> 00:01:57,420 So this will automatically created directly for us, as well as it will add a block design. 34 00:01:58,140 --> 00:02:03,990 The fundamental part of it, which is doing processing system with a default configuration setting will 35 00:02:03,990 --> 00:02:06,450 also be added right now. 36 00:02:06,450 --> 00:02:13,590 On the top of this, we could build up our application rate, so our agenda is to verify how we connect 37 00:02:13,920 --> 00:02:14,790 to email. 38 00:02:15,980 --> 00:02:17,190 And an elite, right? 39 00:02:17,540 --> 00:02:22,580 So let me just double click on an IP so that we able to add an email interface. 40 00:02:22,610 --> 00:02:23,030 OK. 41 00:02:23,300 --> 00:02:26,570 So when we go to the Am I configuration? 42 00:02:26,730 --> 00:02:27,020 OK? 43 00:02:27,770 --> 00:02:32,000 You could see we have a provision to add and I hope to fit into in here. 44 00:02:32,000 --> 00:02:34,290 We will just be selecting TPA. 45 00:02:34,670 --> 00:02:41,810 Am I right now when we go to a paper like we do not have a provision to specifically select PIN number 46 00:02:41,810 --> 00:02:47,870 seven because we know that pin number seven, we have our early, so we select or not, it will remain 47 00:02:47,870 --> 00:02:48,350 turned on. 48 00:02:48,410 --> 00:02:51,200 Once you select this GPI, am I right? 49 00:02:51,500 --> 00:02:58,450 So all the peripherals which are utilized for other purpose that things will not be considered as GPIO 50 00:02:58,550 --> 00:03:01,630 am I rest all will be by default, considered GPI. 51 00:03:01,640 --> 00:03:02,000 All right. 52 00:03:02,270 --> 00:03:08,030 So we only added, and you are going to be so if you analyze you are utilized the PIN number 48 49 off 53 00:03:08,030 --> 00:03:12,020 an email, so only that to binge on checked over here. 54 00:03:12,020 --> 00:03:15,330 Rest all are considered as it GPIO, am I? 55 00:03:15,470 --> 00:03:21,290 And this is the reason why we should know an exact thing on which we have an allergy, because then 56 00:03:21,290 --> 00:03:25,640 we want to trigger or send a signal to that specific ping or an allergy. 57 00:03:25,850 --> 00:03:29,360 We must be knowing the pin number on which we want to send the signal right. 58 00:03:29,660 --> 00:03:32,870 And that could be easily followed by referring to a reference menu. 59 00:03:33,080 --> 00:03:33,290 Right. 60 00:03:33,620 --> 00:03:36,680 So with this modification will just go ahead and click OK. 61 00:03:37,820 --> 00:03:45,120 Right, so we have our modified hive, it will just be clicking on validate design. 62 00:03:45,140 --> 00:03:46,580 This is the first thing that we do. 63 00:03:46,790 --> 00:03:51,860 So once validation is successful, OK, we could proceed for a generation or wherever. 64 00:03:52,250 --> 00:03:58,580 So right click on a to Z and create an issue that will allow you to create or app for us. 65 00:03:59,180 --> 00:04:06,040 So once that happens and Russian is successful, we do not need to specify any ioco because dude, it 66 00:04:06,080 --> 00:04:06,440 is. 67 00:04:07,500 --> 00:04:12,210 Connected to it's been by default, as well as fixed highways also connected by default rate. 68 00:04:12,390 --> 00:04:20,070 And when we utilize an email processing system on this tag, a way to connect the specific signal onto 69 00:04:20,070 --> 00:04:20,820 the hydrophone. 70 00:04:21,060 --> 00:04:23,010 So we do not need to specify a constraint. 71 00:04:23,250 --> 00:04:26,520 And that could be verified by just performing a synthesis. 72 00:04:26,850 --> 00:04:30,360 So they will be finding all the codes are fixed by default, right? 73 00:04:30,370 --> 00:04:34,610 So without worrying much, we will just be going to generate bitstream. 74 00:04:34,620 --> 00:04:38,280 So let it just go ahead and perform generation of.