1 00:00:00,060 --> 00:00:07,290 So when we discuss about will be required to specify a country for the boats and when we do not require 2 00:00:07,290 --> 00:00:13,710 to specify a country for the full, well, not the method that we already discussed is you just go to 3 00:00:13,710 --> 00:00:17,340 Abu Dhabi and see all the circles which turn. 4 00:00:17,340 --> 00:00:24,180 And that basically mean that specific route is already connected to the specific highway. 5 00:00:24,180 --> 00:00:26,880 And we do not need to specify any country, right? 6 00:00:27,660 --> 00:00:27,990 If. 7 00:00:28,830 --> 00:00:31,780 You are confusing that specific method. 8 00:00:31,830 --> 00:00:37,080 Okay, all right, if you find this method difficult, the easiest unmet needs is method that we have 9 00:00:37,080 --> 00:00:42,510 is this, so we will be understanding what we need to do to. 10 00:00:43,430 --> 00:00:49,310 I understand for all the polls where we do require to specify a constituency for the rest of the vote, 11 00:00:49,320 --> 00:00:56,000 which already have the constraints specified right here when we are discussing about the fundamental 12 00:00:56,000 --> 00:01:02,210 process that will be following whenever we do not need to specify a constraint, we directly jump to 13 00:01:02,240 --> 00:01:03,440 completion of a pedestrian. 14 00:01:04,010 --> 00:01:10,550 But for this matter, what it would do is as soon as you complete your block data and then as you complete 15 00:01:10,550 --> 00:01:14,190 generation of Rappler, you just need to perform a synthesis. 16 00:01:14,250 --> 00:01:21,160 OK, so for each and every design that will be performing instead of directly jumping into dodge additional 17 00:01:21,220 --> 00:01:24,560 bitstream independent of a required to constrain or not? 18 00:01:24,830 --> 00:01:25,160 OK. 19 00:01:25,370 --> 00:01:31,370 What you could do is you could just perform synthesis and you may be required to perform it because 20 00:01:31,370 --> 00:01:37,370 when we perform a gender synthesis automatically, this perform first, then implementation and then 21 00:01:37,370 --> 00:01:38,650 completion of a registry. 22 00:01:39,020 --> 00:01:42,290 But you start with the rand synthesis, OK? 23 00:01:43,010 --> 00:01:46,760 And then once your synthesis is complete, just open the synthesis design. 24 00:01:46,940 --> 00:01:49,500 So this will take you to this view, right? 25 00:01:50,720 --> 00:01:58,370 And then at the bottom, you see right here, you will be noticing all the polls that you have in are 26 00:01:58,370 --> 00:02:04,780 designed to you have if you analyze the design rates already, just go back to the design. 27 00:02:06,150 --> 00:02:11,970 So you have a sense clock with your present system clock and then three pulse rate, perfect style and 28 00:02:12,900 --> 00:02:14,010 button for trade. 29 00:02:14,030 --> 00:02:15,630 Those are the four goals that we have. 30 00:02:16,520 --> 00:02:22,820 Now, if you open the synthesis design right here, you would notice that you have a fixed style GDR, 31 00:02:23,180 --> 00:02:24,870 the Cisco and then buttons. 32 00:02:25,520 --> 00:02:27,740 These are the folks that are available. 33 00:02:28,010 --> 00:02:32,240 And then you could clearly see that button belt is already fixed. 34 00:02:32,300 --> 00:02:34,340 So we do not need to specify anything. 35 00:02:34,340 --> 00:02:40,790 And if you just explore button back, you could actually notice the already have gone been specified. 36 00:02:41,510 --> 00:02:46,390 Similarly, when we consider this is glass, so this is connected to on wall clock, right? 37 00:02:46,400 --> 00:02:51,020 You could see the fixed MOC where the checkmark we're here and the pin also. 38 00:02:51,020 --> 00:02:57,590 Is there evidence the idea here also you could see all are checked and you could see the respect to 39 00:02:57,800 --> 00:03:00,880 goods already specified by everybody. 40 00:03:00,890 --> 00:03:04,040 Similarly, for a fixed line, so you have a check, right? 41 00:03:04,340 --> 00:03:09,710 So whenever you are in a confusion with the first method, that is when you analyze a booth that. 42 00:03:10,880 --> 00:03:18,410 And if you do not clearly follow whether you need to specify the constraint for the specific booth or 43 00:03:18,410 --> 00:03:22,730 not, just go ahead performer synthesis or when this and this is just right. 44 00:03:22,970 --> 00:03:29,060 And then here at the bottom side, if you analyze and I will be listing all the quotes that upgrades 45 00:03:29,210 --> 00:03:33,920 in your site and there we could just analyze this big step. 46 00:03:33,930 --> 00:03:37,630 So wherever you see this, check in a fixed tap. 47 00:03:37,880 --> 00:03:40,580 You weren't required to specify the constraint for that. 48 00:03:40,610 --> 00:03:45,170 That basically means you already we already have specify a constraint for us. 49 00:03:45,200 --> 00:03:50,870 OK, wherever you don't see this checkmark, that is if you see something like this, that basically 50 00:03:50,870 --> 00:03:54,110 means you do need to specify the Consti point. 51 00:03:54,170 --> 00:03:54,440 Right? 52 00:03:54,680 --> 00:03:56,390 So this is another method that you have. 53 00:03:56,690 --> 00:04:01,900 So you just need to perform synthesis after you complete your new wrapper. 54 00:04:02,120 --> 00:04:09,290 And once you analyze that, the rules are specified for all the I'U boots that you have in your design. 55 00:04:09,500 --> 00:04:11,330 You could just proceed with addition of a.