1
00:00:00,060 --> 00:00:03,090
Who will resume that we have already added a block designed.

2
00:00:03,270 --> 00:00:09,030
So what we do is we editing processing system right now here.

3
00:00:09,060 --> 00:00:14,150
Once you are alleging processing system IP, you get a block automation and when you click on block

4
00:00:14,200 --> 00:00:18,510
automation, OK, you get an option to apply about research now.

5
00:00:18,900 --> 00:00:22,860
So when we apply work, we see what that basically do.

6
00:00:22,860 --> 00:00:26,100
Is it basically enable a set of the basic.

7
00:00:26,100 --> 00:00:33,030
They fell onto a what's right and we could directly go ahead and start building, our application noted.

8
00:00:33,330 --> 00:00:39,090
This does not necessarily mean that we need to stick to all the paper, which are added by default.

9
00:00:39,810 --> 00:00:45,150
So you could go to a configuration window by double clicking on anything processing IP, and then we

10
00:00:45,150 --> 00:00:51,000
could disable the unnecessary paper below the paper that you do not want to work right.

11
00:00:51,150 --> 00:00:58,700
So usually when we perform a block or two mission with the IP, we will be keeping this option set.

12
00:00:58,710 --> 00:01:04,960
So this will give us an access to the default basis which we frequently utilize.

13
00:01:05,640 --> 00:01:08,870
The other two option that you see is cross triggering and cross.

14
00:01:09,300 --> 00:01:17,220
So as you, you want to trigger the signal from a software that is, you have your C application, OK,

15
00:01:17,220 --> 00:01:22,290
which represent one of the part of your embedded system and another one is in hardware design.

16
00:01:22,740 --> 00:01:30,080
So whenever we want to generate the stimulus from the software and then apply to the hardware, indeed

17
00:01:30,150 --> 00:01:35,860
the simplest form in hardware and apply to the software, that is what we refer to as grass trigger,

18
00:01:36,000 --> 00:01:36,270
right?

19
00:01:36,600 --> 00:01:43,380
So at least for a few sessions, we'll be keeping this disabled as we progress further again when we

20
00:01:43,380 --> 00:01:45,790
are not getting the expected result.

21
00:01:45,810 --> 00:01:55,340
We we first started the debugging and debugging strategies such as I'lI or debugging our application.

22
00:01:55,350 --> 00:01:59,020
If that doesn't work, then we could work around across the street, right?

23
00:01:59,070 --> 00:02:02,670
So this is one of the strategy we have for our debugging.

24
00:02:02,910 --> 00:02:09,120
So when we applied the boot research, what that will do is that will enable the setup of Wayfarer know

25
00:02:09,300 --> 00:02:16,890
how it recognized the boot, because when we are recruited by default, the will also specify a scheme

26
00:02:16,890 --> 00:02:17,290
for it.

27
00:02:17,520 --> 00:02:25,980
So we do not need to manually specify how we do understand the boot, where we need to connect to peripherals

28
00:02:25,980 --> 00:02:28,020
by analyzing a pool of data.

29
00:02:28,500 --> 00:02:32,750
We do have a set of Huebel files for each work.

30
00:02:34,030 --> 00:02:37,580
OK, so recognizing that it basically add up everything.

31
00:02:37,590 --> 00:02:43,800
So all the peripheral which are recognized by a revival, we do not need to specify any.

32
00:02:46,110 --> 00:02:51,480
So let me just try to go ahead and try to perform the booth automation rate.

33
00:02:51,480 --> 00:02:57,180
So once we perform this block automation, you will clearly see we get the idea.

34
00:02:57,260 --> 00:02:57,870
Right, so.

35
00:02:59,340 --> 00:03:01,740
The DDR is enabled by default and then.

36
00:03:02,710 --> 00:03:08,400
A set of strike rate, so if you just double click on an IP, you would clearly understand the signal

37
00:03:08,440 --> 00:03:12,130
of benefits which are enabled on board.

38
00:03:12,580 --> 00:03:18,450
So you have a B, you what GPI, o SD Ethernet and USB zero.

39
00:03:18,460 --> 00:03:20,700
You also have an access to orders.

40
00:03:21,190 --> 00:03:26,350
Does that the setup of benefits which are applied on board research?

41
00:03:26,530 --> 00:03:28,390
So these are enabled by default.

42
00:03:28,420 --> 00:03:33,120
Now, this does not necessarily mean that you need to utilize them in your design.

43
00:03:33,130 --> 00:03:38,680
So if you are required to use them, you can go ahead with this preset or else what you could do is

44
00:03:38,680 --> 00:03:39,590
you could just to sit.

45
00:03:39,740 --> 00:03:41,950
The process of disabling is very simple.

46
00:03:42,280 --> 00:03:42,640
OK.

47
00:03:42,850 --> 00:03:49,660
So you could just double click on this lock design and it will take you to the option where you could

48
00:03:50,020 --> 00:03:52,050
check or uncheck the peripheral, right?

49
00:03:52,060 --> 00:03:58,450
So if you do not want to utilize it to just do it and then check it similarly, you the zero is still

50
00:03:58,450 --> 00:03:58,860
zero.

51
00:03:58,870 --> 00:04:03,400
And then if you want to for the right, any benefit, OK, you could just check it.

52
00:04:03,460 --> 00:04:08,340
That is how we add and remove the benefit, right?

53
00:04:08,680 --> 00:04:12,640
And you could also see a something that I do recognize.

54
00:04:12,670 --> 00:04:13,000
OK.

55
00:04:13,250 --> 00:04:15,490
It basically all to add up.

56
00:04:15,500 --> 00:04:16,720
Very fitted for it, right?

57
00:04:16,720 --> 00:04:23,500
So you have an email and then something which we do not know.

58
00:04:24,010 --> 00:04:28,540
So this is the first week you go to a blog design, specify the benefit.

59
00:04:28,540 --> 00:04:33,370
And so all the peripheral, which are enabled by boot risk, will see a checkmark.

60
00:04:33,370 --> 00:04:37,840
You could just double click on the checkmark and then you could enable or disable OK.

61
00:04:37,930 --> 00:04:40,960
You could also add any other peripheral if you want.

62
00:04:40,990 --> 00:04:41,320
Great.

63
00:04:41,740 --> 00:04:46,480
The next option that you have in an IP is the SPL configuration.

64
00:04:46,480 --> 00:04:53,350
So here you get an access to any exciting if it's OK so that you could connect your sleeve IP, you

65
00:04:53,350 --> 00:04:55,570
could also connect the moustiques types.

66
00:04:56,320 --> 00:04:57,840
So here are the option really.

67
00:04:57,850 --> 00:04:58,020
Two.

68
00:04:58,030 --> 00:05:02,870
It will be Shumate by default and M.D., except we've decided.

69
00:05:02,890 --> 00:05:06,430
So if you just need to disable it, you just uncheck this.

70
00:05:06,670 --> 00:05:11,710
This is how we enable any Siblani, except also the general setting that we get right.

71
00:05:11,710 --> 00:05:18,850
For example, the common one is the party looking for a new one, and that's the thing as you progress

72
00:05:18,850 --> 00:05:20,530
further will be on this right?

73
00:05:21,650 --> 00:05:25,190
We also get the reset and the trigger rate.

74
00:05:25,310 --> 00:05:30,500
So if you want to have a reset, you could just enable it or else you would just disappear, right?

75
00:05:30,860 --> 00:05:40,400
So I'll say interface if you want to add to zinc pricing system, so you get that option in an Pospisil

76
00:05:40,400 --> 00:05:41,480
configuration, right?

77
00:05:42,150 --> 00:05:44,960
Specified agenda setting that we get the tenting pricing.

78
00:05:45,980 --> 00:05:49,160
All the peripherals actually in and base that allow you OK.

79
00:05:49,160 --> 00:05:54,050
If you just go ahead, you could see all the peripherals and you also see the payphones, which are

80
00:05:54,050 --> 00:05:55,010
enabled and disabled.

81
00:05:55,020 --> 00:05:57,490
So disabled people are shown with Agricola.

82
00:05:57,800 --> 00:06:03,380
Whereas the peripheral, which originally showed me the green card to see if I just removed this checkmark,

83
00:06:03,380 --> 00:06:05,900
you could see that distance.

84
00:06:06,440 --> 00:06:12,710
Three rates are already failed with Agricola, but as all the enable peripherals are shown with the

85
00:06:12,710 --> 00:06:15,830
Greek right, then here you'll get the pin.

86
00:06:15,830 --> 00:06:16,160
So.

87
00:06:16,590 --> 00:06:22,190
So as we brought this, there will be understanding what am I always saying, EMI?

88
00:06:22,550 --> 00:06:22,790
Right?

89
00:06:22,910 --> 00:06:27,370
So clock configuration here you'll be finding all the options, really.

90
00:06:27,780 --> 00:06:28,120
All right.

91
00:06:28,130 --> 00:06:34,490
So the clock that you want to send to bill fabric, if you want to do that, you have that option.

92
00:06:34,510 --> 00:06:35,120
Do it here.

93
00:06:35,120 --> 00:06:36,020
The timeous.

94
00:06:36,050 --> 00:06:39,590
OK, then there's include washed off timer and triple.

95
00:06:40,820 --> 00:06:47,560
Timer count, right, so all the timer related options, OK, it may be a memory clock or an eye opener

96
00:06:47,570 --> 00:06:55,450
from Cork or of yellow fabric lock or the AEDC, all of this stuff you'll be finding in that clock and

97
00:06:55,760 --> 00:06:57,530
then you have a deadline on figuration.

98
00:06:57,530 --> 00:07:04,700
In most of the cases, we won't be touching goodbye to flight of this will light duty DDR as soon as

99
00:07:04,700 --> 00:07:06,860
we form onboard automation.

100
00:07:06,920 --> 00:07:14,270
OK, so this allows us to get an extra space where we could the that and then into pads we practice

101
00:07:14,270 --> 00:07:17,290
will be understanding how we enable the fabric and took it.

102
00:07:17,540 --> 00:07:24,170
And then that we we could end up seeing processing system whenever we want to execute in high priority

103
00:07:24,170 --> 00:07:25,910
dust for a lower priority to task.

104
00:07:26,150 --> 00:07:32,420
So designed options that you get with a configuration of processing system.

105
00:07:32,540 --> 00:07:32,780
Right.

106
00:07:32,990 --> 00:07:37,730
So by default, when you perform a block automation, you get set of confetti filters, which could

107
00:07:37,730 --> 00:07:44,030
be disabled by either going to a very, very you are just going to a blocked design, selecting the

108
00:07:44,030 --> 00:07:44,460
paper.

109
00:07:44,530 --> 00:07:49,430
You want to disable double clicking on it, and I'm checking the box, right?

110
00:07:51,150 --> 00:07:59,040
BSP configuration give us an access, very good interface and the piece to the zinc processing system,

111
00:07:59,040 --> 00:08:02,580
either maybe sleeve or master utilizing any export, right?

112
00:08:02,790 --> 00:08:04,960
All the papers and peripherals.

113
00:08:05,640 --> 00:08:12,420
OK, clock configuration, use and access to boot memory clock, IOP clock clocks, year fabric block

114
00:08:12,960 --> 00:08:17,050
tDCS rates all the clock related configuration could be done over here.

115
00:08:17,240 --> 00:08:19,770
You one provision will not be touching Ruby.

116
00:08:19,770 --> 00:08:21,270
Be keeping it live right?

117
00:08:21,930 --> 00:08:26,910
And then we have an interest so desirable adoption that we can then zinc pricing system.

118
00:08:27,780 --> 00:08:30,480
Now something that will be understanding now is how.

119
00:08:31,540 --> 00:08:38,770
How we recognize what all polls, which are identified by Dubai, differ so that we do not need to add

120
00:08:38,770 --> 00:08:39,450
a constraint.

121
00:08:39,730 --> 00:08:46,690
Similarly, how we know the Vatican and which are not recognized by we are also there as soon as we

122
00:08:47,050 --> 00:08:54,500
find out that these are the periphery of goods which are not recognized by ARE in that case.

123
00:08:54,730 --> 00:08:56,670
We need to specify a constraint.