1
00:00:00,390 --> 00:00:03,770
So the entire first section will be dealing with an installation, right?

2
00:00:03,780 --> 00:00:10,500
So we start with how we install an IED right from creating an account, got inside instructions to choosing

3
00:00:10,500 --> 00:00:14,880
the specific version of Movado, which is supporting in this sticky right.

4
00:00:15,150 --> 00:00:19,140
So recommended version is to install two thousand eighteen point four.

5
00:00:19,260 --> 00:00:19,590
OK.

6
00:00:20,010 --> 00:00:26,090
But you could go up in two thousand nineteen point one because that is the last version, which is sticky

7
00:00:26,110 --> 00:00:32,640
support and up up to two thousand nineteen point one that is from two thousand nineteen point two onwards.

8
00:00:32,640 --> 00:00:35,930
We have a straight, so that is completely different.

9
00:00:37,240 --> 00:00:40,270
Tool, OK, which will not be discussing in this specific.

10
00:00:40,600 --> 00:00:47,530
So we'll be focusing on how we install the correct are the version so that it supports and.

11
00:00:48,040 --> 00:00:54,340
Right along with this will also be considering the devices which are we should support.

12
00:00:54,640 --> 00:00:54,990
OK.

13
00:00:55,000 --> 00:01:02,440
And then selecting the booth that we are utilizing is from visually how we add a third party board to

14
00:01:02,440 --> 00:01:08,890
and we will do that will also be discussing finally valid installation itself will be installing a chamber

15
00:01:08,890 --> 00:01:14,140
required for a connection of a booth, will be focusing on how we connect and hardware, and then we'll

16
00:01:14,140 --> 00:01:19,650
be testing whether hardware connection is detected by the robot.

17
00:01:19,810 --> 00:01:20,050
Right.

18
00:01:20,050 --> 00:01:24,460
So this will be measured in those section.