1
00:00:00,330 --> 00:00:05,400
I will consider a second example here, what we're going to do is we will be handling and interpret

2
00:00:05,400 --> 00:00:12,120
this from a second rate, so posting after you create your fundamental block design is to go ahead and

3
00:00:12,120 --> 00:00:13,680
add an inch or control the right.

4
00:00:13,680 --> 00:00:18,600
So we'll just be searching for AI in D.C. and then to control.

5
00:00:18,600 --> 00:00:23,390
Now I'll put up an inch will be connected to an inch up enough on my growth rate.

6
00:00:23,700 --> 00:00:28,380
Once this system, we go ahead and select the IXI time again.

7
00:00:28,380 --> 00:00:34,050
We just require to use a single timer over here, so we will be reconfiguring an IP.

8
00:00:35,090 --> 00:00:41,790
To disable the timer rate was this instant, the interruption that we have now, you will see by default,

9
00:00:41,790 --> 00:00:47,840
this IP have an interruption rate, so we do not need to do anything to enable an interruption of geeks,

10
00:00:47,920 --> 00:00:48,180
he said.

11
00:00:48,800 --> 00:00:54,350
We just go ahead and connect the interruption off any exit timer to and I often interrupt control.

12
00:00:54,650 --> 00:00:58,370
So once this is done, we are ready to perform a connection automation, right?

13
00:00:58,370 --> 00:01:04,700
So this will automatically connect both in controller as well as a timer to our micro plays utilizing

14
00:01:04,700 --> 00:01:05,570
the same technique.

15
00:01:05,610 --> 00:01:05,840
Great.

16
00:01:06,140 --> 00:01:10,070
So here you could clearly notice we have a you work like for debugging purpose.

17
00:01:10,460 --> 00:01:17,410
Then we have a timer, OK, which is connected to the clipboard utilizing the same technique.

18
00:01:17,420 --> 00:01:24,420
And we also have an interrupt controller, OK, which is again connected to the yeah would using any

19
00:01:24,420 --> 00:01:29,870
exchange to connect to a disconnect with all the connection made to the respective pin.

20
00:01:29,900 --> 00:01:32,900
We'll give you a ready to perform validation of our design.

21
00:01:33,710 --> 00:01:38,360
So once validation is successful, you can see one, two and three pins out there.

22
00:01:39,440 --> 00:01:40,440
A gnarly sight.

23
00:01:40,460 --> 00:01:45,710
And these are already been mapped to their respective right, so you could see one checkmark, two and

24
00:01:45,710 --> 00:01:45,950
three.

25
00:01:46,610 --> 00:01:49,640
So once this is done, we are ready to do damage to rapper.

26
00:01:51,330 --> 00:01:55,110
So one trapper is ready, we will proceed for generation of Bitstream again.

27
00:01:55,530 --> 00:02:02,180
We will be exporting at hydrofoil as soon as it is ready to go direct to where we have our people and

28
00:02:02,190 --> 00:02:04,340
will again be creating an application project.

29
00:02:04,350 --> 00:02:10,870
Rachel directly will be starting with then writing the code for handling and Interest from any exciting

30
00:02:10,920 --> 00:02:11,700
time, right?

31
00:02:11,880 --> 00:02:18,620
To follow the same procedure that we've been doing from the beginning and create a new platform project

32
00:02:18,630 --> 00:02:23,670
that will be your first step by invoking the existing file that you have in the same directory and then

33
00:02:23,760 --> 00:02:25,680
start a new application project again.

34
00:02:25,920 --> 00:02:28,230
We will be utilizing and halloway template.