1
00:00:00,150 --> 00:00:06,450
The sample depth that we get by default is one zero two four eight, so we could collect Max one 024

2
00:00:06,450 --> 00:00:09,060
sample as we have right now.

3
00:00:09,060 --> 00:00:14,520
If you are in a situation where you want to increase the depth of the sample, then you just need to

4
00:00:14,520 --> 00:00:16,350
go to the block the same rate.

5
00:00:16,350 --> 00:00:19,020
So we'll just be closing the hardware manager.

6
00:00:20,230 --> 00:00:20,540
OK.

7
00:00:20,560 --> 00:00:26,350
As you perform a connection automation and as you add a system really right in that gives if you want

8
00:00:26,350 --> 00:00:31,840
to increase the debt, you just need to double click on it just to Miley again that you get an option

9
00:00:31,840 --> 00:00:32,810
to configure it.

10
00:00:32,810 --> 00:00:36,250
So right now, the vet said by default, is one zero two four.

11
00:00:37,030 --> 00:00:42,980
So if you want the depth of two zero four eight, you could choose it, but this will simultaneously

12
00:00:42,980 --> 00:00:45,770
increase the consumption of ram slices.

13
00:00:46,000 --> 00:00:50,620
So in a previous case, when we have a depth of one zero two four, you could see the medium slices

14
00:00:50,620 --> 00:00:51,940
that we are consuming is six.

15
00:00:51,950 --> 00:00:55,930
And as we increase, we will be consuming more be slices.

16
00:00:56,110 --> 00:01:01,360
So depending on the resources that you have in the begiram that you are utilizing, you could choose

17
00:01:01,360 --> 00:01:06,760
the depth that you wish to have in the design to debug your entire right.

18
00:01:06,760 --> 00:01:09,850
So this is the strategy to choose the depth you remember.

19
00:01:09,850 --> 00:01:15,570
As you change the depth, you will be increasing the breadth and where we will be storing our sample

20
00:01:15,700 --> 00:01:15,920
rate.