1
00:00:00,060 --> 00:00:05,610
So in this section, we'll start discussing about simple, basic and OK, so simple paper, be considered.

2
00:00:06,550 --> 00:00:12,580
A class of profiteer which required a minimum qualification, for example, if you considered the simple

3
00:00:12,700 --> 00:00:18,550
GPA, you so there, we just need to set up the correct direction and we are ready to send or receive

4
00:00:18,550 --> 00:00:19,270
the read right.

5
00:00:19,570 --> 00:00:23,230
So this can be considered as a simple pay three, right?

6
00:00:23,470 --> 00:00:28,350
So in this specific section, we first start with fundamental upsell drivers.

7
00:00:28,350 --> 00:00:31,060
So Xilinx driver follow a specific pattern.

8
00:00:31,360 --> 00:00:36,130
So almost all the paper will be initialized considering two structures, so one fixed structure and

9
00:00:36,130 --> 00:00:37,090
an instant structure.

10
00:00:37,330 --> 00:00:43,200
So how we use this structure and how we declare them is what we're going to discuss first.

11
00:00:43,210 --> 00:00:47,430
Then we start a demonstration of usage of sales, right?

12
00:00:47,440 --> 00:00:47,760
Right.

13
00:00:47,980 --> 00:00:50,800
So we started writing a letter to GPIO.

14
00:00:51,160 --> 00:00:57,040
Then we proceed to understand how we read the detail from a GPA right to the ones we understand, reading

15
00:00:57,040 --> 00:00:59,770
and writing process with VIP.

16
00:01:00,040 --> 00:01:07,410
We learned a string of what will be the changes when you have multiple GPI instances date.

17
00:01:07,420 --> 00:01:13,120
So we have a multiple GPA IPPIS, which we want to run at the same time, right?

18
00:01:13,120 --> 00:01:19,270
So how we handle that situation that will also be covering and finally, each Excel GPA will support

19
00:01:19,270 --> 00:01:22,420
multiple China that is dual channel supported.

20
00:01:22,420 --> 00:01:28,480
So how we use a dual channel and what will be the changes that you need to do while writing a C application

21
00:01:28,480 --> 00:01:30,730
will be understanding that also in ADT, right?

22
00:01:31,000 --> 00:01:38,290
So the major takeaway in this specific section will be how we use the multiple instances of a GPA and

23
00:01:38,290 --> 00:01:43,030
finally how we use the very channel off the GPI IP.