1 00:00:00,590 --> 00:00:02,060 And I do welcome this new lesson. 2 00:00:02,180 --> 00:00:05,480 Now we are done with the coding process. 3 00:00:05,600 --> 00:00:08,150 So let's go to the final testing phase. 4 00:00:08,690 --> 00:00:12,890 First, you need to verify your code and make sure that it works properly. 5 00:00:16,059 --> 00:00:20,320 Now, the first thing that we need to edit in this code is that this is Ivy. 6 00:00:21,650 --> 00:00:26,540 Now, as you can see here, we have a problem with the motion detected variable. 7 00:00:27,230 --> 00:00:30,050 We need to change the name, but a fire game. 8 00:00:33,960 --> 00:00:36,540 Now, make sure that you are done compiling. 9 00:00:44,590 --> 00:00:52,030 Right now, go back here and start by adding your Wi-Fi network name and you do need to add the passport. 10 00:00:53,680 --> 00:00:55,240 I'll change the password later. 11 00:00:55,720 --> 00:01:04,090 Now we need double talk in volume and our chat TV, and we can give this if we applied the reason titled 12 00:01:04,390 --> 00:01:05,830 Telegram Bot Creation. 13 00:01:07,010 --> 00:01:14,030 Once you place them here, you have everything ready and you only need to hook up your speakers to a 14 00:01:14,030 --> 00:01:18,080 board to load your code on the USB 32. 15 00:01:20,080 --> 00:01:25,210 Now, once you hook up your air speed test or you can go to the start menu, right click. 16 00:01:26,210 --> 00:01:28,520 And select device manager. 17 00:01:32,930 --> 00:01:39,010 Now this is the device manager, when do you need to go to the ports section and if you followed our 18 00:01:39,020 --> 00:01:44,180 steps, you should see the CP 210 x USB port. 19 00:01:44,190 --> 00:01:47,960 We are bridge with a port number which has come for. 20 00:01:49,140 --> 00:01:54,090 Now, this is a port that we will use to connect our U.S. B-52. 21 00:01:54,840 --> 00:02:00,840 I have it connected, so all what I need to do is go to Arduino Ivy. 22 00:02:01,890 --> 00:02:05,280 Make sure that the board selected is ESB 32. 23 00:02:07,020 --> 00:02:07,470 Do it. 24 00:02:07,500 --> 00:02:09,930 Yes, B-52 Dev Kit version one. 25 00:02:11,440 --> 00:02:17,140 And make sure that I select the report here, we have the board as come for. 26 00:02:18,550 --> 00:02:22,840 So I will uninstall these devices. 27 00:02:23,970 --> 00:02:25,260 Because they have come forward. 28 00:02:26,940 --> 00:02:27,810 This one as well. 29 00:02:31,460 --> 00:02:36,680 Now, we only have one for Solace scan for online changes. 30 00:02:37,940 --> 00:02:39,470 Again, we have the full. 31 00:02:40,440 --> 00:02:41,790 I'll go to the tools. 32 00:02:42,720 --> 00:02:45,000 Make sure that you. 33 00:02:46,000 --> 00:02:48,350 Wait for the ball to appear again. 34 00:02:48,370 --> 00:02:50,470 I will unplug, unplug the bond. 35 00:02:57,400 --> 00:03:01,990 Now go to the tools menu or as you can see, comfort is selected. 36 00:03:03,400 --> 00:03:04,270 Now, once you have done. 37 00:03:04,870 --> 00:03:06,340 Go on, click upload. 38 00:03:16,180 --> 00:03:22,710 As you can see, it's compiling the sketch, you need to make sure that you have the right side on life.I 39 00:03:22,710 --> 00:03:30,900 basketball, underwrite a user ID for the box and for the token. 40 00:03:31,440 --> 00:03:32,910 Now it's uploading the code. 41 00:03:33,130 --> 00:03:35,760 You can see up to 100 percent. 42 00:03:38,510 --> 00:03:41,600 Once done, it will hard reset the board. 43 00:03:42,410 --> 00:03:44,240 Now you can open up the system. 44 00:03:45,950 --> 00:03:47,720 Now I will say the board from my end. 45 00:03:51,860 --> 00:03:57,620 You need to change the border it here to the elected moderate about a suitable again. 46 00:03:58,890 --> 00:04:02,280 As you can see, now, it's trying to connect to the Wi-Fi network. 47 00:04:04,500 --> 00:04:10,430 Although I find him is Ashraf on, since we are seeing dots means that it's still trying to connect 48 00:04:10,430 --> 00:04:11,430 to the Wi-Fi network. 49 00:04:12,110 --> 00:04:12,680 But. 50 00:04:13,790 --> 00:04:14,510 Till now. 51 00:04:15,810 --> 00:04:17,310 Not no connection. 52 00:04:17,730 --> 00:04:21,839 So we might have entered the wrong password. 53 00:04:23,250 --> 00:04:24,570 So we need to check that. 54 00:04:26,830 --> 00:04:32,710 OK, now, after listening to the board, Wi-Fi connected, the IP address is, as you can see, one 55 00:04:32,710 --> 00:04:36,700 hundred and two hundred sixty eight zero hundred seven. 56 00:04:42,360 --> 00:04:53,310 Now, all I need to do is simply connect the motion detector and get an onslaught of signal on the pin 57 00:04:53,550 --> 00:04:54,210 number. 58 00:04:55,460 --> 00:04:59,420 So there will appear a number twenty one. 59 00:05:00,850 --> 00:05:01,840 So let's do that. 60 00:05:03,400 --> 00:05:07,090 Now I have been 21 one connected to the motion picture. 61 00:05:07,930 --> 00:05:09,850 Let us open the cinema for one more time. 62 00:05:10,450 --> 00:05:18,100 As you can see, motion has been detected because there is a mole and so detected motion message is 63 00:05:18,100 --> 00:05:18,460 here. 64 00:05:19,090 --> 00:05:21,400 Now we need to go to our telegram. 65 00:05:23,240 --> 00:05:24,310 This is our boat. 66 00:05:24,760 --> 00:05:25,040 I've. 67 00:05:26,400 --> 00:05:30,480 So we need to scroll up to see our bottling. 68 00:05:32,270 --> 00:05:33,260 This is all about. 69 00:05:34,950 --> 00:05:36,390 And we need to start it. 70 00:05:38,850 --> 00:05:41,250 Now the board has started. 71 00:05:42,230 --> 00:05:44,420 What we need to do is simple. 72 00:05:46,160 --> 00:05:48,200 We need to reset our export. 73 00:05:54,650 --> 00:05:55,960 And to check our box. 74 00:05:57,310 --> 00:06:04,690 Now we need to make sure that we see this message motion and temperature, what started off, as you 75 00:06:04,690 --> 00:06:11,950 can see a few scrawled inside our code, you can see that we add a simple line. 76 00:06:16,470 --> 00:06:16,860 Here. 77 00:06:18,430 --> 00:06:24,670 Once we start our sport, we need to send this thought on since we are looking at this message. 78 00:06:25,630 --> 00:06:25,990 Here. 79 00:06:26,890 --> 00:06:27,190 OK. 80 00:06:27,880 --> 00:06:29,500 Not here in our boat here. 81 00:06:30,100 --> 00:06:31,010 Wash it on temperature. 82 00:06:31,030 --> 00:06:33,820 What started means that the boat is on. 83 00:06:34,540 --> 00:06:42,100 So now what we need to do is to connect the motion picture and make a thick motion, and we should receive 84 00:06:42,100 --> 00:06:42,700 a message here. 85 00:06:42,700 --> 00:06:45,820 That motion has been detected, so that's sign. 86 00:06:50,660 --> 00:06:53,720 Now we have to check the CO2 market as well. 87 00:06:54,830 --> 00:07:02,660 Now, when motion is detected, it will send a message to the theater monitor, and it will send the 88 00:07:02,660 --> 00:07:07,250 same message to our Telegram board. 89 00:07:12,850 --> 00:07:21,580 So as you can see, motion has been detected twice, so it will directly send a message to our Telegram 90 00:07:21,580 --> 00:07:21,970 bot. 91 00:07:22,600 --> 00:07:26,320 We only have to wait for few seconds for the message to revive. 92 00:07:30,360 --> 00:07:33,720 Now, as you can see, detected motion and detected motion. 93 00:07:34,470 --> 00:07:42,510 So here we received a message to our Telegram bot telling us that motion has been detected just like 94 00:07:42,510 --> 00:07:43,260 in our code. 95 00:07:43,530 --> 00:07:46,440 And this was the end of our practical testing. 96 00:07:47,010 --> 00:07:49,680 Now you can do anything with this idea. 97 00:07:49,710 --> 00:07:58,470 You can make a project that sense your temperature, motion detection, let's say light percentage in 98 00:07:58,470 --> 00:08:07,890 a room, and you can even send commands the other way around by programming your bot to send messages 99 00:08:08,220 --> 00:08:09,250 and programming you. 100 00:08:09,300 --> 00:08:15,540 He asked people to receive these messages, but this thing would be covered in a future section. 101 00:08:16,500 --> 00:08:17,670 Thanks for watching this lesson. 102 00:08:17,790 --> 00:08:21,630 As you can see here, we have everything just as in our code. 103 00:08:22,650 --> 00:08:25,560 We received a message when motion has been detected. 104 00:08:25,800 --> 00:08:27,450 This is our Telegram bot. 105 00:08:29,190 --> 00:08:32,640 If you have any question regarding anything inside the code, I'm here to help. 106 00:08:33,240 --> 00:08:33,929 Thanks for watching. 107 00:08:33,960 --> 00:08:36,480 This is Ashraf from educational engineering team.