1 00:00:12,270 --> 00:00:12,750 Hello. 2 00:00:12,780 --> 00:00:19,710 In this tutorial, we will continue to build our communication program already we adopt our settings 3 00:00:19,950 --> 00:00:20,190 then. 4 00:00:20,190 --> 00:00:22,560 Now I will insert the role here. 5 00:00:22,890 --> 00:00:24,990 Then they will do one more thing. 6 00:00:25,200 --> 00:00:31,390 I will put a timer to start communication arrest for under the need for communication. 7 00:00:32,220 --> 00:00:40,260 When you open the policy or when you open the energy of your electrical board and the drives is going 8 00:00:40,260 --> 00:00:42,870 to be open after one or two seconds. 9 00:00:42,930 --> 00:00:43,290 OK. 10 00:00:43,620 --> 00:00:50,490 And that moment, if your pulse is starts to communication, suddenly after zero point four second from 11 00:00:50,490 --> 00:00:54,930 here, you can see suddenly it will give an communication error. 12 00:00:55,050 --> 00:00:58,830 How can we protect it, protect our communication? 13 00:00:59,010 --> 00:01:00,390 And how can we prevent it? 14 00:01:01,430 --> 00:01:03,250 And 1000 always-on. 15 00:01:03,270 --> 00:01:06,720 OK, I will start the timer timer, for example. 16 00:01:07,710 --> 00:01:09,030 Let's say 60. 17 00:01:09,240 --> 00:01:10,800 OK, how many seconds? 18 00:01:10,920 --> 00:01:13,140 Let's say three seconds. 19 00:01:13,170 --> 00:01:14,250 This is the first thing. 20 00:01:14,670 --> 00:01:19,020 And then we can insert a one more or tomorrow to here. 21 00:01:19,470 --> 00:01:26,100 And if timer is activated, LDP timer 60. 22 00:01:26,160 --> 00:01:27,600 OK, run the rising edge. 23 00:01:27,930 --> 00:01:33,420 We are going to set to beat and one thousand three hundred and fifty. 24 00:01:34,230 --> 00:01:36,450 And also one more thing. 25 00:01:37,470 --> 00:01:40,410 Said and one thousand three hundred fifty four. 26 00:01:40,950 --> 00:01:48,540 OK, then you will see enable the function of the PLC selling and enable ultramodern kirschling. 27 00:01:48,570 --> 00:01:49,680 What is this? 28 00:01:50,010 --> 00:01:56,850 According to our settings, OK, this two bit is going to communicate the PLCC communication. 29 00:01:56,880 --> 00:01:57,300 OK. 30 00:01:57,510 --> 00:02:00,000 And I will go on line again to my place here. 31 00:02:00,180 --> 00:02:02,540 And this program is going to be standard to see. 32 00:02:02,550 --> 00:02:03,600 And I will say yes. 33 00:02:04,290 --> 00:02:05,700 I will say yes. 34 00:02:06,570 --> 00:02:08,910 Then it is standard, OK. 35 00:02:09,600 --> 00:02:13,920 Let's wait a little bit more after three seconds then, OK? 36 00:02:14,370 --> 00:02:16,470 And now something is changed. 37 00:02:16,740 --> 00:02:18,330 If I go to communicate. 38 00:02:19,570 --> 00:02:21,090 I want to show it to you also. 39 00:02:22,540 --> 00:02:24,610 And let's start. 40 00:02:28,310 --> 00:02:33,770 Then you will see now arrest 232 is active, OK? 41 00:02:34,130 --> 00:02:42,380 But that word four hundred and eight to five communication was active, but when it is stopped, normally 42 00:02:42,380 --> 00:02:43,790 it is in the wrong condition. 43 00:02:44,190 --> 00:02:48,700 And I believe it is not detected 350. 44 00:02:48,710 --> 00:02:51,020 So these are all receptive. 45 00:02:51,320 --> 00:02:57,260 So we can activate these to so on and so on. 46 00:02:57,500 --> 00:03:02,240 And then you will see arrest for on an eight to five flight is flushing out, OK. 47 00:03:02,600 --> 00:03:04,850 But we need to go to here. 48 00:03:05,450 --> 00:03:07,160 I will show it to you once more. 49 00:03:07,400 --> 00:03:08,840 There is a timeout time. 50 00:03:08,850 --> 00:03:10,760 OK, now focused here. 51 00:03:11,030 --> 00:03:16,640 It is searching arrest for under an eight to five communication, but it is not detecting the thief 52 00:03:16,850 --> 00:03:20,830 because of why the parameters of the VFO is not up. 53 00:03:21,320 --> 00:03:27,700 OK, so I will stop this time for this tutorial into next tutorial. 54 00:03:27,710 --> 00:03:32,660 We will continue with the the communication parameters of the VDT. 55 00:03:33,140 --> 00:03:41,960 And also, we will continue to write PLCC program of the vessel for the communication ideas for on eight 56 00:03:41,960 --> 00:03:45,560 five four US communication of the Virgin PLCC. 57 00:03:45,890 --> 00:03:48,020 And I am finished for Restoril. 58 00:03:48,230 --> 00:03:48,830 See you. 59 00:03:48,950 --> 00:03:50,060 Internet2, Toro.