1 00:00:12,400 --> 00:00:13,900 Hello and good to talk to you. 2 00:00:14,050 --> 00:00:24,190 We will define our protocol, and this protocol is going to communicate with the PRC to be effective. 3 00:00:24,430 --> 00:00:26,380 But this communicate is important. 4 00:00:26,410 --> 00:00:26,860 Why? 5 00:00:27,310 --> 00:00:35,950 Because of if the parameters are not same between Kalsi and VDT is the communication error will be access 6 00:00:36,640 --> 00:00:38,440 into health area. 7 00:00:38,470 --> 00:00:40,300 You will see the axillary editing. 8 00:00:40,510 --> 00:00:44,230 And at this point, you will see the protocol and setting codes. 9 00:00:44,860 --> 00:00:48,220 If you left, click to it, you will see the protocol and set in court. 10 00:00:48,730 --> 00:00:50,700 Application is open. 11 00:00:50,710 --> 00:00:57,760 Then we are going to select the data link and the perity and stop it and the portrait we can select 12 00:00:57,760 --> 00:00:58,360 from here. 13 00:00:58,840 --> 00:01:04,840 I'm going to use seven and even and one then data length is going to be seven. 14 00:01:04,840 --> 00:01:06,990 Perity is going to be even stop. 15 00:01:07,000 --> 00:01:09,380 It is going to be one beat and portrait. 16 00:01:09,400 --> 00:01:14,410 I'm going to set a similar nine thousand six hundred beats per second. 17 00:01:15,130 --> 00:01:24,700 And if I select these ones and if I left click to R, OK, then you will see zero zero eight to six. 18 00:01:24,790 --> 00:01:32,230 This is hexadecimal value and this value must be INTUITY or tarta register one thousand one hundred 19 00:01:32,230 --> 00:01:35,470 and twenty or be 1036. 20 00:01:35,920 --> 00:01:39,730 If you write here, for example, zero zero and seventy. 21 00:01:41,130 --> 00:01:49,290 If you let to hear L, then you will set the communication protocol and left side change to seven and 22 00:01:49,290 --> 00:01:57,600 one to four thousand eight hundred beats per second, but I want to use seven, even one and nine thousand 23 00:01:57,600 --> 00:01:58,180 six hundred. 24 00:01:58,650 --> 00:02:00,030 I want to see the value. 25 00:02:00,060 --> 00:02:05,580 This is very good application to calculate immediately your protocol settings. 26 00:02:05,850 --> 00:02:06,810 This is the first thing. 27 00:02:06,960 --> 00:02:08,460 So what should we do? 28 00:02:08,670 --> 00:02:12,210 Let's start first of all, we need to write. 29 00:02:12,660 --> 00:02:15,240 And I will delay this one. 30 00:02:17,970 --> 00:02:23,700 Then this one also Aldi and 1002 in the first run of the policy. 31 00:02:24,150 --> 00:02:25,320 I want to move. 32 00:02:28,720 --> 00:02:29,710 Hexadecimal. 33 00:02:30,820 --> 00:02:40,070 Eight seats, OK, that we calculated into the one thousand one hundred and twenty then at the device. 34 00:02:40,330 --> 00:02:44,650 The explanation you will see, this is my communication protocol settings. 35 00:02:44,660 --> 00:02:45,610 This is the first thing. 36 00:02:45,880 --> 00:02:47,320 OK, this is standard to. 37 00:02:47,830 --> 00:02:55,380 This is going to be standard to see when in the first round I will delete this and line. 38 00:02:55,930 --> 00:02:58,720 Then we shall continue at this point. 39 00:02:59,020 --> 00:03:01,510 We need to define two more data. 40 00:03:01,690 --> 00:03:05,980 And these are all going to be I will put here my. 41 00:03:06,900 --> 00:03:07,310 Hello. 42 00:03:07,800 --> 00:03:13,890 And I'm going to set aside one thousand one hundred and twenty. 43 00:03:14,160 --> 00:03:15,840 So what is this? 44 00:03:16,140 --> 00:03:25,620 This is if you go to explanation area communication protocol and holding what will happen this set and 45 00:03:25,620 --> 00:03:28,320 1120 beats and beats. 46 00:03:28,320 --> 00:03:37,530 OK, literally beats is going to keep this data communication protocol and it helps to keep into memory. 47 00:03:37,770 --> 00:03:38,790 This is the first thing. 48 00:03:39,030 --> 00:03:42,870 And another thing we need to continue with the reset. 49 00:03:43,140 --> 00:03:43,650 OK. 50 00:03:43,830 --> 00:03:45,960 And one thousand one hundred forty three. 51 00:03:46,230 --> 00:03:47,900 We need to set up policy. 52 00:03:48,120 --> 00:03:48,630 OK. 53 00:03:48,810 --> 00:03:54,020 We are resetting and 1143 oxalate relay that moment. 54 00:03:54,060 --> 00:03:58,620 The policy is going to understand this is an ASCII communication, OK? 55 00:03:58,800 --> 00:04:05,130 If you go to exponentials, so you will see if this is often this is usque communication. 56 00:04:05,340 --> 00:04:11,400 Already we selected usque communication protocol and send it to the one thousand one hundred and twenty. 57 00:04:11,730 --> 00:04:12,180 OK. 58 00:04:12,270 --> 00:04:12,750 Very good. 59 00:04:12,960 --> 00:04:14,640 And then what should we do? 60 00:04:15,390 --> 00:04:17,370 We can do one more thing. 61 00:04:17,970 --> 00:04:18,450 OK. 62 00:04:18,480 --> 00:04:24,420 It is set and one thousand one hundred sixty one. 63 00:04:24,780 --> 00:04:25,260 OK. 64 00:04:25,560 --> 00:04:28,410 This is eight or 16 bit smart. 65 00:04:28,470 --> 00:04:33,330 And if it on, we can use eight bits more. 66 00:04:33,390 --> 00:04:38,440 But we should we can use or we we don't need it. 67 00:04:38,470 --> 00:04:38,820 Alright. 68 00:04:38,820 --> 00:04:39,270 OK. 69 00:04:39,540 --> 00:04:41,070 I can explain it later. 70 00:04:41,340 --> 00:04:43,140 But it doesn't matter for me now. 71 00:04:43,470 --> 00:04:44,280 I will. 72 00:04:45,550 --> 00:04:48,160 Just oh, okay, this is. 73 00:04:49,750 --> 00:04:50,740 OK, very good. 74 00:04:51,400 --> 00:04:55,420 Then another thing, another important point because of uh. 75 00:04:56,670 --> 00:05:01,320 We need to say to station number two, CALCE, it is already important. 76 00:05:01,500 --> 00:05:02,790 And how can we do this? 77 00:05:03,000 --> 00:05:09,090 We can move station number like, for example, for the OK to PLSS, if you want thousand. 78 00:05:10,100 --> 00:05:11,510 One hundred twenty nine. 79 00:05:12,050 --> 00:05:14,390 OK, then this is. 80 00:05:15,560 --> 00:05:16,730 Time our sitting sorry. 81 00:05:16,750 --> 00:05:17,420 Sorry for that. 82 00:05:17,660 --> 00:05:22,310 Because of why we can send you one thousand one hundred twenty one. 83 00:05:22,610 --> 00:05:29,120 It is the timeout and the timeout is for short because of I will say to hear one hundred. 84 00:05:29,810 --> 00:05:32,810 Then we can move. 85 00:05:33,470 --> 00:05:41,060 Let's continue with the station number like twenty to thirty one thousand one hundred twenty nine. 86 00:05:41,460 --> 00:05:47,290 OK, I'll see communication addresses 20 now then we can stop at this point. 87 00:05:47,300 --> 00:05:48,140 What happened? 88 00:05:48,560 --> 00:05:49,810 We set up policy. 89 00:05:50,120 --> 00:05:57,080 Start the communication protocol with the settings and the settings is seven eight one one nine thousand 90 00:05:57,080 --> 00:06:04,950 six hundred beats per second and set the communication protocol and hold it and reset and one thousand 91 00:06:05,270 --> 00:06:08,300 one hundred forty three and use ASCII communication. 92 00:06:08,510 --> 00:06:14,840 And your address for underneath five communication timeout settings is four hundred milliseconds. 93 00:06:15,050 --> 00:06:17,570 Zero four zero point four seconds. 94 00:06:18,200 --> 00:06:22,910 And your address is now the communication address now is twenty. 95 00:06:23,090 --> 00:06:24,950 OK, then I will. 96 00:06:25,890 --> 00:06:32,020 Click the court, then this court is now compiled, and I will send it to Percy. 97 00:06:32,190 --> 00:06:35,280 And this is the first thing I will say yes. 98 00:06:35,280 --> 00:06:36,570 I say yes then. 99 00:06:36,570 --> 00:06:39,830 Now this is send it to PLCC. 100 00:06:40,230 --> 00:06:41,940 OK, then this is running. 101 00:06:42,240 --> 00:06:44,400 And already the. 102 00:06:45,800 --> 00:06:48,080 Said that in one thousand one hundred and twenty. 103 00:06:48,440 --> 00:06:54,590 And that moment, we can stop an entire next tutorial, we will start to arrest four hundred and eighty 104 00:06:54,590 --> 00:06:58,880 five communication, and we will set some beats already. 105 00:06:59,240 --> 00:07:00,770 See you into next tutorial.