1
00:00:12,300 --> 00:00:12,630
Hello.

2
00:00:12,750 --> 00:00:22,620
In this tutorial, we will see an example about the communication between Doby, HMRC and Omron.

3
00:00:23,590 --> 00:00:26,320
We one thousand the right.

4
00:00:27,200 --> 00:00:33,680
In here, you will see the frequency and you are reading output frequency, output, current and output

5
00:00:34,040 --> 00:00:38,060
power and forward and backward buttons are here.

6
00:00:38,360 --> 00:00:44,920
So here you will see the station number is one of the VFD and the communication settings, or protocol

7
00:00:44,930 --> 00:00:48,770
is nine thousand six hundred eight and one.

8
00:00:49,010 --> 00:00:50,600
And here are the parameters.

9
00:00:50,930 --> 00:00:59,090
So how it is running normally under the frequency settings input, you will see Ember two.

10
00:00:59,300 --> 00:01:07,730
This is the mode bus communication address of the Omron WI one thousand drive, OK, for example.

11
00:01:07,940 --> 00:01:11,540
Forward button Let's analyze it here.

12
00:01:11,720 --> 00:01:13,160
You can see the right address.

13
00:01:14,090 --> 00:01:17,770
This is the internal memory of the top soft.

14
00:01:17,780 --> 00:01:18,170
OK?

15
00:01:18,350 --> 00:01:20,210
This is internal memory peak.

16
00:01:20,600 --> 00:01:28,150
But if you go to macro section, then you will see a bit of an 0.1 0.1.

17
00:01:28,160 --> 00:01:31,790
Is this reverse so diverse?

18
00:01:32,150 --> 00:01:33,210
He's followed forward.

19
00:01:33,230 --> 00:01:40,310
This octave done reverses this actuator, but this is not also the motor's communication.

20
00:01:40,340 --> 00:01:49,850
Forward settings If you go to macro and if you go to on macro, then you will see the link to then invert

21
00:01:49,850 --> 00:01:50,270
one.

22
00:01:50,510 --> 00:01:51,050
OK.

23
00:01:51,380 --> 00:01:53,090
We are writing to invert.

24
00:01:53,090 --> 00:01:54,020
One is one.

25
00:01:54,020 --> 00:01:58,670
One is the forward and this is the settings of the V 1000, right?

26
00:01:58,680 --> 00:02:01,760
OK, this is important point for the most mass communication.

27
00:02:01,760 --> 00:02:02,540
This is the address.

28
00:02:02,780 --> 00:02:12,410
If right into invert, one is one that it is turning forward and also off macro and this of what's happening,

29
00:02:12,590 --> 00:02:14,720
we are writing zero to invert one.

30
00:02:14,720 --> 00:02:21,130
So there I was stopping and for the reverse, let's take a look once this is also the same mother,

31
00:02:21,140 --> 00:02:24,020
OK, emit one into intimate one.

32
00:02:24,020 --> 00:02:27,670
We are writing two, then this is backward and off macro.

33
00:02:27,680 --> 00:02:32,270
This is zero stopping VFD or that that's all OK.

34
00:02:32,420 --> 00:02:39,980
And we are here and we're thirty six and thirty eight and thirty nine ultra can see current power they

35
00:02:39,980 --> 00:02:42,110
can see on the HMRC.

36
00:02:42,120 --> 00:02:44,120
This is the application.

37
00:02:45,490 --> 00:02:57,490
Monitoring and this is this gives you an idea idea, how can we communicate with HMRC directly to the

38
00:02:57,490 --> 00:03:06,070
FDA and we will do and a lot of examples about it, and we will show you, how can we do it with another

39
00:03:06,070 --> 00:03:06,400
drive?

40
00:03:06,460 --> 00:03:08,590
Also, I finished for this tutorial.

41
00:03:08,830 --> 00:03:14,110
If you have a question, you can ask me immediately and see you Infinix's tutorials.