1
00:00:12,240 --> 00:00:12,690
Hello.

2
00:00:12,720 --> 00:00:17,560
In this tutorial, we will learn how can we go online to our TV?

3
00:00:17,750 --> 00:00:19,370
We have this soft software.

4
00:00:19,380 --> 00:00:21,420
First of all, we need to go to here.

5
00:00:21,690 --> 00:00:23,070
You can see this is offline.

6
00:00:23,340 --> 00:00:30,240
I will click here and then communications set up settings are appearing and then we need to select import

7
00:00:30,240 --> 00:00:31,320
is for why?

8
00:00:31,590 --> 00:00:34,200
Because of our device manager is.

9
00:00:36,330 --> 00:00:41,400
A sign is compact for you will see it first thing, this is really important.

10
00:00:41,460 --> 00:00:42,030
Sorry.

11
00:00:42,430 --> 00:00:44,850
And we need to go device manager.

12
00:00:46,100 --> 00:00:50,420
And then you will see here this is come forward, OK?

13
00:00:50,630 --> 00:00:56,360
This is going forward and then we are going to communicate via USB key and nine thousand six hundred

14
00:00:56,360 --> 00:00:57,290
seven, even one.

15
00:00:57,560 --> 00:01:01,200
These are the parameters into the video also.

16
00:01:01,220 --> 00:01:05,510
OK, let's go here, and let's check here our parameters.

17
00:01:05,520 --> 00:01:10,310
Nine We assigned remember, uh, the previous lecture.

18
00:01:10,550 --> 00:01:15,620
These parameters nine parameters are was nine thousand six hundred ninety seven.

19
00:01:15,620 --> 00:01:16,110
Even one.

20
00:01:16,130 --> 00:01:21,320
OK, now we can test if the everything is successfully.

21
00:01:22,800 --> 00:01:30,020
Connected all cabling and the whole parameters into the video is correct, and these parameters are

22
00:01:30,030 --> 00:01:32,910
both rate and protocol is same with 250.

23
00:01:33,150 --> 00:01:34,080
These must be green.

24
00:01:34,080 --> 00:01:34,890
Let's test it.

25
00:01:35,820 --> 00:01:37,170
And it is.

26
00:01:38,280 --> 00:01:41,200
Trying to go line, connecting to our rain, right?

27
00:01:41,280 --> 00:01:43,230
OK, let's take a look once.

28
00:01:44,430 --> 00:01:47,400
What is a problem or is there any problem?

29
00:01:47,400 --> 00:01:48,840
I'm looking at searching.

30
00:01:49,810 --> 00:01:50,270
OK.

31
00:01:50,560 --> 00:01:54,610
But I will close it and I will taste once.

32
00:01:55,000 --> 00:01:57,880
OK, now you will see if I.

33
00:01:59,090 --> 00:02:05,630
Chris, at first what I did, I just fixed some cables, OK, after I press the test, you will see

34
00:02:05,630 --> 00:02:08,110
this is green again or fly.

35
00:02:08,210 --> 00:02:11,330
And these are the same with the BFD and test.

36
00:02:11,630 --> 00:02:12,750
And it is green.

37
00:02:12,780 --> 00:02:20,490
So now we are online with the reactor and you will see at this point, my WiFi features my view.

38
00:02:20,490 --> 00:02:28,250
If this type is VTi-L, version one point twelve is kilowatt is 1.5 and rated voltage and rated current

39
00:02:28,250 --> 00:02:29,420
is here, OK?

40
00:02:29,660 --> 00:02:36,050
Darren, we get everything and then in here you will see the software interface, the file.

41
00:02:36,230 --> 00:02:39,950
And we can open a file drive parameter, quick setup and advanced.

42
00:02:39,950 --> 00:02:41,930
We will take a look at them one by one.

43
00:02:41,930 --> 00:02:47,510
Diagnostics keep it trend and the PD control engineer diagnostics and the options.

44
00:02:47,780 --> 00:02:50,240
We can set the options from here and the help.

45
00:02:50,840 --> 00:02:54,280
First of all, we can go to quick setup.

46
00:02:54,290 --> 00:03:02,300
OK, then lots parameter settings from drive and I will say OK and click set up into the quick setup.

47
00:03:02,310 --> 00:03:03,230
What will happen?

48
00:03:04,250 --> 00:03:06,470
We will adopt our system.

49
00:03:06,740 --> 00:03:12,710
What startup display selection OK in random drive is open?

50
00:03:13,160 --> 00:03:15,920
Which data is going to be shown us on the carpet?

51
00:03:16,160 --> 00:03:23,330
I want to see her can see or I want to see Trick NC or I want to see current or I want to see content

52
00:03:23,330 --> 00:03:26,480
of user defined unit, or I want to see forward and reverse command.

53
00:03:26,540 --> 00:03:33,350
Then normally, freakers is OK for us and content of the multifunction display is here.

54
00:03:33,470 --> 00:03:35,360
You will see a selected area.

55
00:03:35,390 --> 00:03:42,650
OK, then zero point zero four is remember we read it from the we serial communication.

56
00:03:42,890 --> 00:03:49,970
And then at this point you will see these are the user defined coefficient K and moderated current model.

57
00:03:49,980 --> 00:03:50,810
No light current.

58
00:03:51,080 --> 00:03:54,860
And this is, I guess, not correct, but we will check it OK.

59
00:03:55,100 --> 00:03:55,910
And next step?

60
00:03:56,920 --> 00:04:03,220
You will see the maximum output frequency, maximum voltage frequency, then we can change them all

61
00:04:03,430 --> 00:04:04,930
at this point, OK?

62
00:04:05,220 --> 00:04:07,570
Maybe let's change it at this point.

63
00:04:07,570 --> 00:04:13,180
For example, let's take a look what's one point four altogether?

64
00:04:14,600 --> 00:04:15,830
And I will go here.

65
00:04:18,670 --> 00:04:20,630
Just a test, is it running or not?

66
00:04:20,650 --> 00:04:21,070
OK.

67
00:04:21,310 --> 00:04:26,940
This is ton midpoint voltage, I will put it to is 11, OK?

68
00:04:27,250 --> 00:04:33,280
And this is again, I'm going to change it to, for example, one point ninety.

69
00:04:33,640 --> 00:04:34,210
OK.

70
00:04:34,630 --> 00:04:38,020
These are changed and done it here.

71
00:04:38,380 --> 00:04:40,120
I will change it to two hertz.

72
00:04:40,600 --> 00:04:41,930
Uh, yes.

73
00:04:42,520 --> 00:04:43,150
OK.

74
00:04:44,090 --> 00:04:45,020
I'm sorry.

75
00:04:45,650 --> 00:04:48,710
Next, I will say, OK, I said.

76
00:04:49,860 --> 00:04:57,620
Right, and then it is gone and step two, what we have, this will be true and this will be 12 OK and

77
00:04:57,630 --> 00:05:01,050
ten or twelve point five?

78
00:05:01,470 --> 00:05:01,860
OK.

79
00:05:02,130 --> 00:05:08,910
And next step, then source of force frequency command and source of operational command is the role

80
00:05:09,150 --> 00:05:15,970
that we defined before we can change the mode fault indication of my multifunction output relay and

81
00:05:15,970 --> 00:05:18,250
turn as input and output.

82
00:05:18,270 --> 00:05:21,370
These are OK multistep and these are all that we defined.

83
00:05:21,390 --> 00:05:21,690
OK.

84
00:05:22,110 --> 00:05:27,090
And then I will say, OK, this set up and then let's go to.

85
00:05:29,390 --> 00:05:35,900
We have tea and one point three, now you will see two and then twelve point five.

86
00:05:35,930 --> 00:05:37,100
OK, what happened?

87
00:05:37,370 --> 00:05:45,500
We did a quick setup and then after this quick setup is applied to the FDA and all doctors are written

88
00:05:45,500 --> 00:05:46,640
into the FDA, OK?

89
00:05:46,880 --> 00:05:52,370
This is how can we use Creech set up first thing with the realities of what is happening.

90
00:05:52,550 --> 00:05:55,340
It is reading whole parameters from the VTi.

91
00:05:55,580 --> 00:06:03,350
And after we read from the FDA, we can see whole parameters and we can't change anything what we want

92
00:06:03,590 --> 00:06:05,570
and then we can finish, OK?

93
00:06:05,750 --> 00:06:09,320
You will see the digital input terminals and output terminals and everything.

94
00:06:09,530 --> 00:06:12,170
The quick setup aren't finished for this tutorial.

95
00:06:12,350 --> 00:06:14,210
See you in the next tutorial!