1
00:00:12,480 --> 00:00:18,640
Hello, in this tutorial, we will continue to learn Scotter, first of all, I will go here, OK?

2
00:00:18,660 --> 00:00:28,620
This is top 100 HMG and Soft News HMD and I will show it to you how we can use HMG and Scatter and Kelsi

3
00:00:28,620 --> 00:00:29,430
in one project.

4
00:00:29,700 --> 00:00:34,820
And this is the 10 inch ten one hundred twelve W X.

5
00:00:34,830 --> 00:00:39,780
This is my mom, my example and why I am selecting this.

6
00:00:39,780 --> 00:00:46,730
I need an Internet portal and I will say just next and I will search from here to eternity.

7
00:00:47,010 --> 00:00:48,090
OK, very good.

8
00:00:48,090 --> 00:00:51,060
I will make it this connection and then internet.

9
00:00:51,060 --> 00:00:57,540
I'm going to go online via internet but also we can close it, OK, we can say a new file just like,

10
00:00:57,550 --> 00:01:04,050
um, for example this one next one Internet port can be OK for me.

11
00:01:04,050 --> 00:01:05,130
OK, this one.

12
00:01:05,250 --> 00:01:07,620
And I will insert here my delta.

13
00:01:07,620 --> 00:01:11,780
The controller is another dbp asterisk tcp.

14
00:01:11,790 --> 00:01:18,930
OK, I will communicate with Ethernet Port and my controller IP one hundred ninety two point one hundred

15
00:01:18,930 --> 00:01:23,930
sixty eight point zero point zero one point five four K.

16
00:01:24,150 --> 00:01:25,180
And we are.

17
00:01:25,560 --> 00:01:26,370
Let's go to.

18
00:01:27,650 --> 00:01:34,280
Here you will see Ethernet port, and under it it is searching, it's search and you will see one hundred

19
00:01:34,280 --> 00:01:38,120
ninety two point one hundred sixty eight point one point five.

20
00:01:38,150 --> 00:01:38,980
OK, very good.

21
00:01:38,990 --> 00:01:43,070
And I will just go, uh, to here, OK.

22
00:01:43,190 --> 00:01:50,340
And then what we need, we need to say just to finish, OK, and the first page is open.

23
00:01:50,540 --> 00:01:51,740
This is my main screen.

24
00:01:51,980 --> 00:01:54,200
I will make it 50 like that.

25
00:01:54,230 --> 00:01:56,440
Or we can say like that, OK.

26
00:01:56,720 --> 00:01:59,900
And make it properties that will be OK.

27
00:02:00,080 --> 00:02:06,040
And then I will come to here and I will say to you, just data display and numeric data display.

28
00:02:06,050 --> 00:02:11,800
OK, this is going to be um, for example, we can enter here like that.

29
00:02:12,140 --> 00:02:17,540
This is my, um, text here, the zero and it goes to.

30
00:02:18,760 --> 00:02:24,480
This one and make it like that, OK, and let's insert two here.

31
00:02:25,390 --> 00:02:34,450
Real address, OK, and this will be the zero and it'll link and I will say, OK, and then we can go

32
00:02:34,450 --> 00:02:42,150
now online simulation, OK, and I will start an online simulation that now you will see this is 15.

33
00:02:42,160 --> 00:02:49,030
It is reading from the p.l.c., OK, the real one and the HMD simulated.

34
00:02:49,030 --> 00:02:50,710
But online simulator.

35
00:02:50,710 --> 00:02:52,140
Just come to hear this.

36
00:02:52,150 --> 00:02:57,160
Twenty five and that I will go to my scanner and I will connect that now.

37
00:02:57,610 --> 00:02:59,200
Scotter is also twenty five.

38
00:02:59,210 --> 00:03:05,860
OK, you can see it is working and I will go to screen designer at this moment.

39
00:03:05,860 --> 00:03:08,080
OK and screen one.

40
00:03:08,710 --> 00:03:12,130
Just this prepared for me a little bit time ago.

41
00:03:12,130 --> 00:03:18,520
I will just 50 percent just this, this is the, the background area.

42
00:03:18,520 --> 00:03:23,860
You can come here, you can check the background color, you can set an image, a background image,

43
00:03:23,860 --> 00:03:24,280
OK?

44
00:03:24,520 --> 00:03:33,910
And then we learned button and then we tried once to go, OK, and then now we can say to you, for

45
00:03:33,910 --> 00:03:38,110
example, in here, the picture box and other things that we are going to use.

46
00:03:38,320 --> 00:03:45,400
But the first thing in here, if we come to here and if we search the text box, this one, OK?

47
00:03:46,790 --> 00:03:49,220
And let's make it a little bit smaller.

48
00:03:51,280 --> 00:03:52,150
It is not.

49
00:03:52,990 --> 00:03:58,530
Make becomes, um, if I say one hundred or K.

50
00:03:59,940 --> 00:04:05,190
OK, OK, just the volume, OK, then select from the zero.

51
00:04:07,290 --> 00:04:09,580
OK, and very good.

52
00:04:09,600 --> 00:04:10,290
And then.

53
00:04:11,190 --> 00:04:17,470
I will close it, I will say to you here, just run startups can cannot fund.

54
00:04:17,510 --> 00:04:20,910
Yes, I want to make it screen one, a startup screen.

55
00:04:22,140 --> 00:04:28,410
And it's going to be open, then you will see this is 25 now, OK, and also 25.

56
00:04:28,890 --> 00:04:35,640
This is from the p.l.c., I will say 33, OK, 33 and then 33.

57
00:04:35,790 --> 00:04:47,760
So now imagine one people is standing in front of the computer and looking to the screen and one people

58
00:04:47,760 --> 00:04:52,430
is looking to nearby of the electrical board and to looking to HMG.

59
00:04:52,470 --> 00:04:53,200
This is similar.

60
00:04:53,220 --> 00:04:57,450
OK, and why we need to gather like HMG.

61
00:04:57,660 --> 00:05:02,190
OK, HMD nearby off to places almost and on the electrical boards.

62
00:05:02,370 --> 00:05:08,700
But the Scurrah is for example, from the remote control to far away, maybe one hundred meters, maybe

63
00:05:08,700 --> 00:05:13,980
one kilometer, a kilometer far away from the electrical board.

64
00:05:14,100 --> 00:05:16,980
And the operator can activate from here.

65
00:05:17,190 --> 00:05:20,270
OK, maybe it is better to try once more.

66
00:05:20,280 --> 00:05:21,120
Let's close it.

67
00:05:21,910 --> 00:05:27,020
And come here and the screen one, let's set it from here, OK?

68
00:05:27,460 --> 00:05:29,830
And I will enter a button.

69
00:05:31,640 --> 00:05:41,090
And this button then when we Moorestown, OK, um, in here, we will make the wall, you said this

70
00:05:41,090 --> 00:05:43,910
is going to be M0 is going to be one.

71
00:05:43,920 --> 00:05:51,050
OK, I will press just once and when I press two here, OK, and I will read from the HMO and I will

72
00:05:51,050 --> 00:05:53,540
close it and I will come to here and Right.

73
00:05:53,540 --> 00:06:01,850
Click and then indicator just muxtape just a basic indicator and let click to this indicator style can

74
00:06:01,850 --> 00:06:13,220
go round like that and then the state comes to this is also OK and the picture we can select or we can

75
00:06:13,220 --> 00:06:19,520
leave it like that just in here, uh maybe lites but these are not OK maybe.

76
00:06:21,160 --> 00:06:28,650
I'm just such a little bit more and then I will finish, but it doesn't matter, just, uh, they can

77
00:06:28,660 --> 00:06:29,980
come here for Grandcolas.

78
00:06:31,350 --> 00:06:39,000
We did not say sorry and OK, and this going to be like, OK, I'm sorry, right.

79
00:06:39,020 --> 00:06:42,940
And then for the one condition, this is going to be green.

80
00:06:43,590 --> 00:06:46,620
OK, and then this is going to be M0.

81
00:06:50,380 --> 00:06:51,820
And when we.

82
00:06:53,240 --> 00:06:54,920
Then go on my simulation.

83
00:06:56,190 --> 00:06:56,990
And I will go.

84
00:06:57,000 --> 00:06:57,390
OK.

85
00:06:58,430 --> 00:07:08,870
And let's go to Scudder and somebody is going to, uh, start Scudder and the operator is going to start

86
00:07:08,870 --> 00:07:09,550
the motor.

87
00:07:09,600 --> 00:07:18,200
OK, and then you will see this is green now because why M0 is activated and Bisgaard operator and also

88
00:07:18,200 --> 00:07:21,860
it's changed and set off and you will see this is gone.

89
00:07:22,100 --> 00:07:26,180
And then in the scatter screen, let's come to you.

90
00:07:26,440 --> 00:07:27,820
OK, buttons pressed.

91
00:07:27,830 --> 00:07:30,150
And this is active and this is active, that's all.

92
00:07:30,410 --> 00:07:37,870
So this is how can we, uh, understand the structure between the champions and Scaddan of it is working.

93
00:07:38,150 --> 00:07:40,830
This was the small application about it.

94
00:07:41,090 --> 00:07:42,690
See you in the next Turrill.
