1 00:00:12,410 --> 00:00:20,020 Hello, in this tutorial, we will start to go straight to screwdriver and auto detection is OK. 2 00:00:20,270 --> 00:00:24,690 And now the parameters editor that I'm going to open it. 3 00:00:24,710 --> 00:00:25,110 OK. 4 00:00:25,340 --> 00:00:30,050 And you will see at this point the control modes and everything. 5 00:00:30,050 --> 00:00:33,890 But these are all when we opened the first time. 6 00:00:33,890 --> 00:00:37,280 A, this cannot be true because of this. 7 00:00:37,490 --> 00:00:40,480 We need to read from the device, OK? 8 00:00:40,670 --> 00:00:44,500 And now I'm reading from the device and everything is OK. 9 00:00:44,750 --> 00:00:47,920 Then you will see at this point control mode. 10 00:00:47,930 --> 00:00:51,950 OK, my control mode is now you will see can open mode. 11 00:00:53,270 --> 00:00:54,860 This is important. 12 00:00:54,860 --> 00:01:01,630 Why normally with the spatial driver we use PR position control mode. 13 00:01:01,640 --> 00:01:04,520 OK, but now I am using this one. 14 00:01:04,530 --> 00:01:06,050 This is, this is the first thing. 15 00:01:06,050 --> 00:01:07,790 OK, this is really important. 16 00:01:07,790 --> 00:01:18,260 If you cannot select can open mode as how OK, you're going to see in Carnochan Builder this device 17 00:01:18,260 --> 00:01:21,400 is never going to be funded by your CPU. 18 00:01:21,400 --> 00:01:30,860 OK, CPU's scanning and if your drive is this control mode, ok, it, it is funded by cannot to build 19 00:01:30,860 --> 00:01:31,520 the software. 20 00:01:31,550 --> 00:01:35,900 This is the first thing and the next thing can be roommate like that. 21 00:01:35,900 --> 00:01:41,720 Just you can see at this point digital inputs are just the hexadecimal. 22 00:01:41,720 --> 00:01:42,950 One hundred or decimal. 23 00:01:42,950 --> 00:01:44,780 Two hundred fifty six. 24 00:01:45,020 --> 00:01:48,740 Why these are all inactivated by me that's all. 25 00:01:48,920 --> 00:01:52,670 And the next thing maybe at this point transmission speeds left. 26 00:01:52,670 --> 00:01:53,330 Click to here. 27 00:01:53,330 --> 00:01:56,110 OK, five hundred kilobits per second. 28 00:01:56,120 --> 00:01:59,660 OK, and you can leave them all like that. 29 00:01:59,660 --> 00:02:01,460 OK, just what we did. 30 00:02:01,760 --> 00:02:05,990 You need to focus to control MODOK and control. 31 00:02:05,990 --> 00:02:12,020 Modise can open highly and now it is funded and I will go on line. 32 00:02:12,020 --> 00:02:13,760 OK, now we are on line. 33 00:02:13,970 --> 00:02:20,840 This is can network and this is the moment we are going online to this CPU from here and you can say 34 00:02:20,840 --> 00:02:22,490 just scan network. 35 00:02:22,490 --> 00:02:23,000 That's OK. 36 00:02:23,270 --> 00:02:30,560 And we are on line to my can open builder and if you go to here ok left click to here you will see and 37 00:02:30,560 --> 00:02:35,300 receive and transmit PDA communication data at this point. 38 00:02:35,660 --> 00:02:38,480 But for the Acer is left to here. 39 00:02:38,480 --> 00:02:40,670 OK, these are all you can see. 40 00:02:41,720 --> 00:02:43,930 Um, everything is empty. 41 00:02:44,780 --> 00:02:53,780 Then now we will adopt our this system settings, OK, and let them adopt one thousand four hundred 42 00:02:53,810 --> 00:03:02,210 and, uh, one and two and three, we will get them to hear and to transmit that, to hear control orders, 43 00:03:02,220 --> 00:03:03,350 statutes, OK. 44 00:03:03,590 --> 00:03:08,600 And that they will send it to my CPU and then we will communicate for this tutorial. 45 00:03:08,600 --> 00:03:09,410 I am finished here. 46 00:03:09,550 --> 00:03:11,180 See you in the next tutorial.