1 00:00:12,450 --> 00:00:21,960 Hello, in this tutorial, let us meet with the ASPCA to try OK, from the Delta and this is my screwdriver 2 00:00:22,080 --> 00:00:28,580 and in here we have the buttons, molds and for the adopt our parameters, OK? 3 00:00:28,740 --> 00:00:36,510 And on this side of the right, you will see at this point C and five, OK, I C and one for additional 4 00:00:36,510 --> 00:00:38,650 inputs and outputs and also siento. 5 00:00:38,820 --> 00:00:47,190 OK, this is for this uh encoder input of my screwdriver and in here, OK, you will see an open communication 6 00:00:47,190 --> 00:00:54,070 port and at this point three and four and C and three this season three is done this gadget. 7 00:00:54,090 --> 00:00:59,100 OK, this is for the serial communication and this is my USB connection. 8 00:00:59,250 --> 00:01:04,710 And at this point you will see my answer is CPU and via Ethernet port. 9 00:01:04,710 --> 00:01:08,730 OK, we will connect with this p.l.c. and then and the right side. 10 00:01:08,730 --> 00:01:14,930 OK, you will see at this point I will go close a little bit more for you. 11 00:01:15,330 --> 00:01:17,610 This is my can open communication port. 12 00:01:17,620 --> 00:01:20,010 OK, uh, let's check. 13 00:01:21,110 --> 00:01:23,650 Adopt this yellow cable, internet cable. 14 00:01:23,720 --> 00:01:32,870 OK, you will see now can high, can low and that one short or bridge, OK, at this point, the brown 15 00:01:32,870 --> 00:01:35,000 cable it is and register. 16 00:01:35,150 --> 00:01:43,550 I made a short circuit at that because of the need to put here and register and 120 ohm now active. 17 00:01:43,550 --> 00:01:46,850 OK, and three cables enter it at this point you will see. 18 00:01:47,090 --> 00:01:51,130 OK can I can and ok and then can use. 19 00:01:51,290 --> 00:01:53,870 Um let's go a little bit more. 20 00:01:54,890 --> 00:01:59,810 The black is too high, blue is low and the white is grant. 21 00:01:59,810 --> 00:02:02,570 OK and now I will go here. 22 00:02:02,900 --> 00:02:04,180 I will pull it. 23 00:02:04,490 --> 00:02:09,770 OK, this is my Ethernet cable also and also we can use it as can open cable. 24 00:02:09,920 --> 00:02:17,440 OK, at this point you will see from this side OK to the right side if you look it like that, ok. 25 00:02:17,720 --> 00:02:23,810 One is you will see black and the two is blue and three is. 26 00:02:24,700 --> 00:02:35,170 White, OK, like that, and I will put it to CNN, uh, six, the first input, OK, four and six putting 27 00:02:35,170 --> 00:02:39,560 OK now where is my and register of my can open this one. 28 00:02:39,850 --> 00:02:44,050 OK, also for this I will pull it. 29 00:02:45,120 --> 00:02:51,810 I need to or you need to wait here one hundred twenty ohm resistor, OK, where I going to put it, 30 00:02:51,990 --> 00:02:53,540 I will put it to you here. 31 00:02:53,550 --> 00:02:58,420 OK, the second input of can open because this is the first. 32 00:02:58,860 --> 00:03:01,860 And also we have just one drug in my system. 33 00:03:02,070 --> 00:03:09,950 Because of this, you need to put 120 on to your RG forty five check and this is the one and two inputs. 34 00:03:09,960 --> 00:03:10,950 OK, like that. 35 00:03:11,130 --> 00:03:13,410 OK, let's put it to here. 36 00:03:13,410 --> 00:03:14,520 I will adapt it. 37 00:03:15,390 --> 00:03:16,020 Again. 38 00:03:18,490 --> 00:03:19,060 OK. 39 00:03:20,590 --> 00:03:21,640 Now it is. 40 00:03:24,460 --> 00:03:26,470 OK, I put it to here. 41 00:03:26,770 --> 00:03:31,530 OK, so now my system and my configuration is really what we are going to do. 42 00:03:31,720 --> 00:03:37,840 We are this cable, internet, cable, just cable can hide and lowenkron, we will communicate with 43 00:03:37,840 --> 00:03:39,340 this p.l.c. to this drug. 44 00:03:39,430 --> 00:03:45,850 And my promoter will turn according to my commands for this tutorial. 45 00:03:45,850 --> 00:03:46,690 I am finished here. 46 00:03:46,840 --> 00:03:48,700 See you in the next tutorials.