1
00:00:12,600 --> 00:00:21,450
Hello in the studio, we will, uh, we are starting to dry and several running tutorials and one video

2
00:00:21,450 --> 00:00:29,940
recorded, but there were a problem and because of that, I am, uh, recording this tutorial and we

3
00:00:29,940 --> 00:00:38,080
have a two hundred twenty eight, uh, t uh, transistor output p.l.c. in my system.

4
00:00:38,100 --> 00:00:42,540
OK, and also I have, uh, eighty eight to sarod.

5
00:00:42,540 --> 00:00:42,850
Right.

6
00:00:42,870 --> 00:00:43,770
OK, four hundred.

7
00:00:43,770 --> 00:00:43,960
What.

8
00:00:44,280 --> 00:00:49,440
And we have several motors and we will connect to a series.

9
00:00:49,450 --> 00:00:51,350
Kalsi we are Ethernet port.

10
00:00:51,360 --> 00:00:54,420
OK, and then in this p.l.c..

11
00:00:55,270 --> 00:01:00,100
Can one and two is and also can openness on board, OK?

12
00:01:00,280 --> 00:01:07,080
It is embedded to this policy and values can open communication part of this policy and we are this

13
00:01:07,090 --> 00:01:10,200
can open communication, can high can love and ground.

14
00:01:10,960 --> 00:01:19,180
We will send a daughter to Ceradyne and we will use CNN since these are the R.G. four to five Ethernet

15
00:01:19,180 --> 00:01:19,980
ports, OK.

16
00:01:20,140 --> 00:01:28,690
And also can open ports for the self-drive we will enter to hear our communication cable and we need

17
00:01:28,690 --> 00:01:30,130
to put here and register.

18
00:01:30,160 --> 00:01:36,460
OK, I will show them all to you and we will use for the can I can know and grant one, two and three

19
00:01:36,460 --> 00:01:37,700
pins of the and six.

20
00:01:37,990 --> 00:01:41,460
We will go on line to drive via USB.

21
00:01:41,470 --> 00:01:49,330
OK, we are also soft software and for the PRC side also we need to use and register because of in my

22
00:01:49,330 --> 00:01:52,720
system configuration we have just one screwdriver.

23
00:01:52,870 --> 00:01:54,340
We have just one Kelcy.

24
00:01:54,340 --> 00:01:56,800
OK, that's all in next tutorial.

25
00:01:56,830 --> 00:01:59,940
I will show you the configuration and we will continue.

26
00:02:00,100 --> 00:02:02,050
See you in the next tutorials.