1
00:00:07,430 --> 00:00:16,160
Hello, in this video, we are going to learn how to control these wafty via this potential meter and

2
00:00:16,160 --> 00:00:19,160
run and stop via these buttons.

3
00:00:19,310 --> 00:00:28,700
We are kapit now you will see sort of first muster for a common parameter is zero point zero two point

4
00:00:28,700 --> 00:00:35,390
zero zero and sort of first Operation Command is zero two point zero one.

5
00:00:35,660 --> 00:00:40,800
And let's go to these two parameter and zero point zero zero.

6
00:00:41,080 --> 00:00:46,160
Now I will say this is going to be controlled with the digital.

7
00:00:46,160 --> 00:00:47,800
Keep it up and down.

8
00:00:48,080 --> 00:00:55,950
This one's OK and this will be zero and two point zero one should be also digital.

9
00:00:55,970 --> 00:00:57,280
Keep it OK.

10
00:00:57,500 --> 00:01:01,370
And I will go to zero one and this will be zero.

11
00:01:01,370 --> 00:01:02,600
And now it's zero.

12
00:01:02,880 --> 00:01:03,870
OK, very good.

13
00:01:03,890 --> 00:01:10,820
And I will go to first, um, kapit area if I press to start button.

14
00:01:11,420 --> 00:01:14,750
Now you can see it is running.

15
00:01:16,350 --> 00:01:23,480
Now it is running and forward, if I go tomorrow, you can see it is increased to 50 hertz.

16
00:01:23,760 --> 00:01:32,990
If I stopped, now it's stopping and deceleration time is activated, it's going down and down and the

17
00:01:33,000 --> 00:01:35,700
empire is zero output voltages.

18
00:01:35,700 --> 00:01:40,200
OK, again, start so you can see we have an output.

19
00:01:41,650 --> 00:01:47,620
Again, Mode is turning forward and output forecast is now 50 hertz.

20
00:01:47,680 --> 00:01:54,340
OK, if I say stopped now, we can control the we are buttons.

21
00:01:54,580 --> 00:01:59,110
So now we are going to increase our frequency to 50 hertz.

22
00:01:59,140 --> 00:01:59,650
Why?

23
00:02:00,160 --> 00:02:00,700
Because.

24
00:02:01,820 --> 00:02:09,470
It is our Setpoint is 50, if I press the down button, you can see now it will go to, for example,

25
00:02:09,740 --> 00:02:11,920
twenty five or twenty yards.

26
00:02:11,930 --> 00:02:21,560
And if I say go to output frequency, if I say run now it is running, it will reach 220 and it will

27
00:02:21,560 --> 00:02:26,870
be stopped by because our set point for cancer is too intense.

28
00:02:27,140 --> 00:02:29,510
And I will say stop now.

29
00:02:29,720 --> 00:02:31,040
It's going to be stop.

30
00:02:32,510 --> 00:02:40,270
Now, what can we do, we can adopt our set point for I can see the potential meter.

31
00:02:40,340 --> 00:02:48,770
OK, and I will select this parameter to follow and I will go to parameter two point zero zero and I

32
00:02:48,770 --> 00:02:49,460
will make it.

33
00:02:50,550 --> 00:02:52,920
For now, it has ended.

34
00:02:53,520 --> 00:02:57,180
Let's go to first area now, six point six.

35
00:02:57,540 --> 00:03:03,960
If I turn to right side, you can see it's maximum 50 yards and go back.

36
00:03:05,350 --> 00:03:11,540
Zero hearts and I will go a little bit more and I will make it to, for example, 25 years.

37
00:03:12,610 --> 00:03:21,280
Now, twenty five point seven now if I press to start now, it started and it will go to twenty five

38
00:03:21,280 --> 00:03:25,980
point six or seven, doesn't matter, OK, that's correct.

39
00:03:26,230 --> 00:03:32,500
If I press stop, it will go down and down and down and it will be stopped.

40
00:03:32,770 --> 00:03:36,880
And I will go to first area and it's turning forward.

41
00:03:37,090 --> 00:03:41,700
You can see we can adopt our set point for severe potential meteor.

42
00:03:41,920 --> 00:03:42,810
We are kapit.

43
00:03:43,060 --> 00:03:45,270
OK, I'm finished for this video.

44
00:03:45,460 --> 00:03:47,050
See you in the next video.