WEBVTT 00:00.640 --> 00:09.910 OK, we are back in this lecture, we create the geometry and then we'll add physics and proceed with 00:09.910 --> 00:16.720 the simulation to add a geometric conservatory, you select the length a centimeter because for this 00:16.720 --> 00:19.210 example, we work on centimeter skin. 00:20.410 --> 00:22.780 Now, to add a rectangle light, right. 00:22.780 --> 00:25.360 Click on geometry, click on Rectangle. 00:27.430 --> 00:35.620 So for my simulation, I would prefer to select a three centimeter and height two centimeter will click 00:36.190 --> 00:46.990 on to create the time with the height of two centimeters and about a three centimeter now will click 00:47.200 --> 00:48.230 on material. 00:49.360 --> 00:52.980 You see that it will ask some error. 00:53.630 --> 00:54.900 Relax to academically. 00:55.180 --> 00:56.940 I will click on blank material. 00:57.490 --> 01:03.370 When you click on bad material comes will be asked three different parameters because these parameters 01:03.370 --> 01:05.050 will be used by the simulation. 01:05.830 --> 01:14.710 So let's say I'll give a thermal connectivity of 700 density of thousand and heat capacity, let's say 01:15.010 --> 01:15.510 a hundred. 01:16.120 --> 01:17.560 These are just random values. 01:17.890 --> 01:21.280 Depending on the material you're working, you can plug in those values. 01:22.270 --> 01:25.390 Now we'll click on the classroom solid. 01:27.600 --> 01:31.690 OK, let me delete the temperature so that I can show you from the beginning. 01:32.490 --> 01:36.870 So after you and he transferred in solid, we'll have these options. 01:37.410 --> 01:40.490 You click on it, click on temperature. 01:41.300 --> 01:46.770 So for this information, as they already told you, I don't have the bottom to be the source heat source, 01:46.770 --> 01:50.870 which is at a constant temperature of 100 degrees Celsius selectees. 01:52.090 --> 02:00.210 And so 100 degrees Celsius is actually three hundred and seventy three Kelvin. 02:00.480 --> 02:01.500 So this is fine. 02:02.430 --> 02:13.140 Select once again when the temperature reaches two hundred and seventy three and these two are those 02:13.140 --> 02:13.800 temperatures. 02:14.040 --> 02:17.280 So these two are at zero Celsius. 02:21.570 --> 02:30.270 Now, with the left hand side as a thermal insulated to do that right, click and then click on thermal 02:30.270 --> 02:35.390 insulator and then select the side you want to select as thermal insulator. 02:35.940 --> 02:36.900 So that's it. 02:37.500 --> 02:40.500 So our boundary condition is complete. 02:40.980 --> 02:48.320 Now, let's go on blue mesh and try to get the mesh we have is control mesh element size. 02:48.330 --> 02:50.820 Let's say fine and we can build all. 02:51.450 --> 02:53.820 We will have the very beautiful mesh. 02:56.680 --> 02:59.730 Let's say instead of fine, we can select finers. 03:00.120 --> 03:01.710 It will be more dense. 03:02.700 --> 03:04.860 So our mission is complete. 03:06.480 --> 03:11.370 Now the stationary steady if you click on compute. 03:13.550 --> 03:20.520 The software will try to solve the simulation, provided that whatever settings we are given is correct. 03:20.990 --> 03:24.120 Now you get the beautiful result which I showed you. 03:24.470 --> 03:30.620 That means all the settings we have set in the simulation is correct and we are getting some form of 03:30.800 --> 03:31.400 result. 03:32.090 --> 03:38.180 What I meant is it does not mean that your simulation is giving accurate data. 03:38.390 --> 03:47.960 It means that boundary conditions and your geometry and the mesh is compiled by council and you do not 03:47.960 --> 03:48.770 have any error. 03:48.790 --> 03:51.170 That's why you are getting a good result. 03:51.500 --> 03:57.860 Now it's your duty to verify whether the results are consistent with the experiment or the physical 03:57.860 --> 04:00.020 phenomena you are studying or not. 04:01.310 --> 04:03.470 So here we have the result. 04:04.490 --> 04:14.290 OK, we'll stop the lecture here in my next lecture was doing more about post-processing in the result 04:14.420 --> 04:14.930 window. 04:15.830 --> 04:16.790 Thank you for watching. 04:17.120 --> 04:18.950 See you in my next lecture.