WEBVTT

00:02.260 --> 00:04.170
Hello and welcome back.

00:04.600 --> 00:13.330
So here in this tutorial, we will learn how to add a sturdy set up your simulation and compute your

00:13.330 --> 00:13.900
result.

00:14.560 --> 00:20.460
So before we start, let me just change the value of your barometer.

00:20.470 --> 00:29.710
So I'm going to change the value of inductor to four hundred because I think we need to add some higher

00:29.710 --> 00:32.730
values to see the result properly.

00:32.890 --> 00:40.190
The nature will be same, but for her inductance, uh, the potential drop would be higher.

00:40.740 --> 00:49.500
So, OK, so now we are inside the study, uh, as it was in our old model.

00:49.750 --> 00:52.610
So click on Time Dependent study.

00:53.770 --> 01:09.130
Now select the study two milliseconds and in the range just type range, 10 comma zero point one, comma

01:09.250 --> 01:09.820
50.

01:11.290 --> 01:19.450
So basically the simulation will run from ten millisecond in the step of zero point one millisecond

01:19.780 --> 01:21.340
to 15 millisecond.

01:21.520 --> 01:28.450
OK, now what you need to do is click on study one, then go on to study.

01:31.370 --> 01:33.770
The click on biometric chip.

01:36.620 --> 01:43.700
When you click on biometrics sweep, you will have the parametric sweep tab in your study note.

01:45.420 --> 01:54.660
Now in the biometrics zip, click on the plus and you will see that your barometer, if you will be

01:54.660 --> 02:03.530
here in the perimeter, you can type in the number, basically the frequency which you want to study.

02:03.900 --> 02:16.680
So I will just manually write 100, 200, 250, 300, 350 and 400, let's say.

02:17.820 --> 02:27.360
So these are the frequency values, which are the simulation will run and it will run for this time

02:27.360 --> 02:27.690
range.

02:28.860 --> 02:34.920
So to run the simulation, click on study and then click on compute.

02:35.970 --> 02:43.980
When you click on compute, the simulation will start running and you will see there will be a convergent

02:44.370 --> 02:44.910
plot.

02:44.940 --> 02:49.210
It might take a few seconds to solve and he will have your plots.

02:49.410 --> 02:57.660
So in our next tutorial will go to the results and see what results we are getting.

02:58.170 --> 03:02.460
Thanks for watching and we will be back in our next lecture.

03:02.880 --> 03:03.390
Take care.