WEBVTT 00:01.110 --> 00:05.130 Hello, everyone, so we are back in the world of commercial. 00:05.430 --> 00:14.430 So in this lecture, what we will try to do is we'll try to set up the simulation for the circuit for 00:14.430 --> 00:18.820 charging of a capacitor, which we have learned in our previous lecture. 00:19.260 --> 00:25.950 So the first step always is going to fail and then click on new. 00:26.820 --> 00:29.310 When you click on New, you have three options. 00:29.700 --> 00:31.440 One, the model visored. 00:31.740 --> 00:33.180 Second, the black model. 00:33.570 --> 00:35.190 The third, the physics builder. 00:35.850 --> 00:38.090 To start a new model from scratch. 00:38.370 --> 00:47.700 I would love to go to Black Model, click on Black Model and it might ask you to save your previous 00:47.700 --> 00:51.730 model if you already did so for me it is no. 00:53.820 --> 00:56.840 So now we have a fresh new model. 00:57.210 --> 01:03.810 So to start with, we have to add a component now to add a component. 01:04.060 --> 01:12.300 What we have to do is we have to just right click here and we have to click on ADD component and then 01:12.300 --> 01:19.500 we have to choose any one of the components that is truly, truly the they are ready now. 01:19.560 --> 01:25.860 Simulation does not need any geometry because it is a theoretical simulation without a geometry. 01:26.160 --> 01:31.020 We just with the voltage, our resistance and capacitor components. 01:31.260 --> 01:36.780 So we will select 030, we can select any other geometry as well. 01:38.040 --> 01:43.350 Now the second step is to add physics. 01:43.950 --> 01:50.400 Now you can go on to the physics, click on Add Physics. 01:51.900 --> 02:00.750 And then you will get the official stamp here to add the physics for our simulation, what do you need 02:00.750 --> 02:04.260 to do is you have to open up the AC DC module. 02:07.250 --> 02:17.840 And then click on the Electric Circuit, read, click on Electric Circuit and then click on Add to Component. 02:21.290 --> 02:27.980 When you click on Add to component, the electric circuit module will be added in your model builder, 02:28.490 --> 02:31.940 which will be inside your component to one. 02:32.210 --> 02:37.880 In our next lecture, we will learn how we can add the circuit components in our model.