1
00:00:09,000 --> 00:00:20,000
So today, I will tell you how to acquire analog signal using and I might.

2
00:00:21,000 --> 00:00:22,000
So for that purpose,

3
00:00:25,000 --> 00:00:32,000
I directly go to and I mix I at here.

4
00:00:33,000 --> 00:00:47,000
This is my lab bill 2015 BURZAN so I can create a channel and then I have to start the task and then

5
00:00:47,000 --> 00:00:53,000
I have to stop the task and I have to clear the task.

6
00:00:56,000 --> 00:01:05,000
And to acquire the signal, I have to read the signal and in this case, I have to read.

7
00:01:07,000 --> 00:01:14,000
So over here I have to select a channel for that.

8
00:01:14,000 --> 00:01:17,000
I think I am creating a constant.

9
00:01:20,000 --> 00:01:29,000
And in this, I have to select which using which channel, I have to acquire the signal right now I'm

10
00:01:29,000 --> 00:01:36,000
using a zero, so I am selecting a zero.

11
00:01:38,000 --> 00:01:43,000
You have to connect your task and error.

12
00:01:45,000 --> 00:01:48,000
This is your task and this is your error.

13
00:01:52,000 --> 00:02:06,000
Then for continuous read, I have to place a while loop over the radio signal like this, so protesters

14
00:02:06,000 --> 00:02:17,000
are created for this then or this, I create a control and this is my data.

15
00:02:18,000 --> 00:02:24,000
So in the front panel, I'm just

16
00:02:27,000 --> 00:02:28,000
taking a meter,

17
00:02:31,000 --> 00:02:35,000
which shows me the output.

18
00:02:36,000 --> 00:02:43,000
And I directly connect this and or continuous read.

19
00:02:45,000 --> 00:02:49,000
I am placing a delay function also.

20
00:02:51,000 --> 00:03:08,000
And in this, I put a hundred milliseconds, OK, and I'm also taking a Pullen button, because on the

21
00:03:08,000 --> 00:03:15,000
hardware side I'm using a sensor which can detect a load, which can detect the object.

22
00:03:16,000 --> 00:03:22,000
So I know that the output of the sensor is.

23
00:03:25,000 --> 00:03:25,000
Great, then.

24
00:03:28,000 --> 00:03:29,000
Three, Paul.

25
00:03:30,000 --> 00:03:34,000
So poor in the comparison.

26
00:03:37,000 --> 00:03:49,000
Over here in America, here is the comparison, and this is the creator, I directly connect this balloon

27
00:03:50,000 --> 00:03:58,000
to this creator and output and this output is greater than two point five.

28
00:04:02,000 --> 00:04:05,000
It will blow our objectives, Detective.

29
00:04:14,000 --> 00:04:21,000
OK, so for better handling, I just.

30
00:04:24,000 --> 00:04:31,000
A simple added handler also, and this is my vye.

31
00:04:34,000 --> 00:04:42,000
To get the analog data, so on the hardware side, as you see.

32
00:04:46,000 --> 00:04:58,000
This is my my deck and this is my five-fold for this year center and over here I connect differentially

33
00:04:59,000 --> 00:05:01,000
analog input.

34
00:05:02,000 --> 00:05:09,000
In that case, the zero negative and ground of analog input is directly connected.

35
00:05:10,000 --> 00:05:20,000
And this is my ground wire and this is my input signal from the air of as I place my hand or this as

36
00:05:20,000 --> 00:05:22,000
you see the light below.

37
00:05:23,000 --> 00:05:26,000
So this is working and this working.

38
00:05:27,000 --> 00:05:33,000
We can also show we're using back using LabView.

39
00:05:33,000 --> 00:05:35,000
So when I hit on one button.

40
00:05:39,000 --> 00:05:48,000
And as you see, objects object detected, an object detected, an object detected.

41
00:05:49,000 --> 00:06:01,000
So this is the program for either sensor or for analog data, because the output of this sensor is still

42
00:06:01,000 --> 00:06:13,000
an analog mode because it will create a signal when an object is detected and the output of this is

43
00:06:13,000 --> 00:06:17,000
around three point six volts or three point three word.

44
00:06:18,000 --> 00:06:23,000
So this is the program for analog input detection.

45
00:06:24,000 --> 00:06:31,000
Using my back in this case, I'm using a sensor as analog input source.

46
00:06:33,000 --> 00:06:35,000
So thank you.