1
00:00:08,000 --> 00:00:19,000
Today, I will tell you how you can acquire a signal or how you can acquire audio signal using any Mannick

2
00:00:20,000 --> 00:00:29,000
for that purpose, I mean, just connecting my microphone to the audio input board, as you see.

3
00:00:30,000 --> 00:00:41,000
And in the software part, I get to go to my express and over here I have input in this.

4
00:00:42,000 --> 00:00:45,000
I have to acquire sound

5
00:00:48,000 --> 00:00:51,000
and I just play OK.

6
00:00:55,000 --> 00:01:03,000
And for continuous signal, I just get control for that.

7
00:01:03,000 --> 00:01:10,000
For both you for audio signal, you may skip you.

8
00:01:10,000 --> 00:01:11,000
And I might also

9
00:01:14,000 --> 00:01:25,000
because you are there is installed hardware drivers or is also also available on your PC.

10
00:01:26,000 --> 00:01:38,000
So in this case I just connect to my e-mail from chart and when I don't run, but then I see there is

11
00:01:38,000 --> 00:01:49,000
a signal and when I play hello, hello, hello, hello, hello.

12
00:01:49,000 --> 00:01:50,000
There is a signal.

13
00:01:50,000 --> 00:01:55,000
And when I pause my audio, in that case there is no signal.

14
00:02:03,000 --> 00:02:05,000
You can check the amplitude.

15
00:02:06,000 --> 00:02:09,000
You can check the amplitude right now.

16
00:02:09,000 --> 00:02:13,000
I am just updating the chart.

17
00:02:14,000 --> 00:02:20,000
So in that case, otherwise skating is off and over here.

18
00:02:20,000 --> 00:02:31,000
The amplitude is like five, apparently to be five and lower amplitude is minus five.

19
00:02:33,000 --> 00:02:36,000
So when I had only one more done in that case,

20
00:02:41,000 --> 00:02:42,000
there is a straight line.

21
00:02:42,000 --> 00:02:49,000
And when I my voice is there, in that case, some signal there.

22
00:02:49,000 --> 00:02:49,000
Hello.

23
00:02:50,000 --> 00:02:51,000
Hello, hello.

24
00:02:51,000 --> 00:02:53,000
Hello, hello.

25
00:02:53,000 --> 00:03:00,000
Like this you can acquire a signal using let you.

26
00:03:01,000 --> 00:03:01,000
Thank you.