Good morning.
Today, we discuss how the interface really.
With Cardinal.
So here we have really an unknown and it is going to be things like, as you see, one is another,
one is bound and one is inputting them.
So over here, this is my VXI.
I just finished this with the
black one is my ground.
And this is my signal, and this one is back here with my cell phone, OK?
You can use a cell phone or you can use and it'll be nothing.
So this signal will require five more signal to generate or to operate naturally.
So in that software part, I just go to make it happen so fast you have to interface.
You already know Nannerl with Lendu using tools and Makaha from where we are.
Then I just do this, that signal.
In this case, I wouldn't be able to operate freely.
So I am using the cell.
Right.
I will tell you both the ways like DSL and analog.
So in this case, I just use a Wii, you know?
For continuous signal.
Immigration and over here, this is my simple handler here, you just create a constant and in this
you will just select your home, in this case, my compadres six.
And over here you have to just select the boring, like as you see the mores 961 and Gesell, I know
now and over here, this is the PIN number from where, you know, in this case, the PIN number is
four.
And over here, this is the output value.
So I just get.
Switch, or you can see button and just connect this this way, operate my relay, so when I hit the
button, as you see right now.
So when I don't Dunbarton.
The delays.
Hold off on hold on, hold on, hold as you see, the green light is on hold as I switch, as I pass
the switch switch.
So this is how you can operate the relay.
So for Connections, you get sick or have to just some means mains or here and.
These two for this is not real fun, this is not close, and using this, you can see your Ayda tank.