1
00:00:08,000 --> 00:00:09,000
Good morning.

2
00:00:09,000 --> 00:00:21,000
I will tell you how to interface with flame sensor, so here we have our flame sensor for Five-fold

3
00:00:22,000 --> 00:00:27,000
is still on a low out and you can use any.

4
00:00:28,000 --> 00:00:35,000
Then, like on Adolphine or so right now, are you just going to five or.

5
00:00:36,000 --> 00:00:38,000
And signal.

6
00:00:40,000 --> 00:00:41,000
To the kind of open.

7
00:00:43,000 --> 00:00:53,000
Not open to the bin and the ground, so as you see or hear that they sensories.

8
00:00:58,000 --> 00:00:59,000
Or here.

9
00:01:04,000 --> 00:01:07,000
It is loose somewhere.

10
00:01:08,000 --> 00:01:20,000
So when there is a signal that this will go, so you have to just go to that software bar and overhear

11
00:01:20,000 --> 00:01:32,000
just a program for the flame sensor, like for fun clothes, and in this case, the three, so that

12
00:01:32,000 --> 00:01:36,000
it is connected to the number five.

13
00:01:36,000 --> 00:01:39,000
I just figured I'm going stand in this case.

14
00:01:40,000 --> 00:01:41,000
Here is my PIN number.

15
00:01:42,000 --> 00:01:48,000
And this is added to one simple pattern.

16
00:01:48,000 --> 00:01:54,000
And in this case, the fact this and over here, they have to just.

17
00:01:58,000 --> 00:02:08,000
CommVault, as you see, so our air rig, about eight, nine, six double XL and one video for Continuos

18
00:02:08,000 --> 00:02:10,000
saluting the signal.

19
00:02:11,000 --> 00:02:22,000
We had control and one led with the flame is present or not, just back this control you are right now,

20
00:02:22,000 --> 00:02:28,000
the program is OK, so we'll just get a flame.

21
00:02:28,000 --> 00:02:32,000
So appropriate, a flame I just used.

22
00:02:36,000 --> 00:02:38,000
As you see, signalized generated.

23
00:02:39,000 --> 00:02:42,000
And when I say you don't run, but run over here.

24
00:02:44,000 --> 00:02:46,000
So right now, again,

25
00:02:49,000 --> 00:02:52,000
I just get the flame first.

26
00:02:53,000 --> 00:03:03,000
So as you see over here, I have a flame and it is going on, off, on, off, on, off.

27
00:03:03,000 --> 00:03:12,000
So this is how you can interface flame sensor or you can detect any flame in your house using flames

28
00:03:13,000 --> 00:03:19,000
and you can interface flame sensor with know with the help of you.

29
00:03:19,000 --> 00:03:22,000
As you see, the program is very easy in this case.

30
00:03:22,000 --> 00:03:23,000
Thank you.