1
00:00:05,000 --> 00:00:05,000
Good morning.

2
00:00:07,000 --> 00:00:16,000
I will tell you how to acquire multiple analog signals or signals from different sensors using Ardino

3
00:00:16,000 --> 00:00:17,000
Nannerl.

4
00:00:17,000 --> 00:00:25,000
So right now what here I have already know NENO, as you see, this is my three point three hold on

5
00:00:25,000 --> 00:00:29,000
board and this is my favorite signal and this is my ground signal.

6
00:00:29,000 --> 00:00:34,000
So I just create a program for multiple signals.

7
00:00:34,000 --> 00:00:37,000
So right now, just go to make Bluebox

8
00:00:40,000 --> 00:00:43,000
and over here you have to just select one.

9
00:00:44,000 --> 00:00:50,000
And then in this I just lock it over here.

10
00:00:50,000 --> 00:00:51,000
So, so that.

11
00:00:55,000 --> 00:01:08,000
Over here, I just read signal, and in this case, I will just read multiple ringin from multiple vents.

12
00:01:09,000 --> 00:01:15,000
So in that case I just use this rule to signal to banks.

13
00:01:15,000 --> 00:01:19,000
In this case I am reading from Bouvines.

14
00:01:20,000 --> 00:01:27,000
So just this, this or this and this.

15
00:01:28,000 --> 00:01:31,000
And I just use a simple edit.

16
00:01:31,000 --> 00:01:36,000
And if there is some error in the program, just connect error to error.

17
00:01:37,000 --> 00:01:44,000
And over here I just select the PIN number and create a constant for spin like zero.

18
00:01:44,000 --> 00:01:49,000
And what here this might create a pin one.

19
00:01:50,000 --> 00:01:59,000
OK, and for continuous reading I just place a value over here and create not constant.

20
00:02:00,000 --> 00:02:02,000
In this case I to control.

21
00:02:02,000 --> 00:02:12,000
OK, so over here you have select the board number stand in this case, as you know my component is

22
00:02:12,000 --> 00:02:13,000
six.

23
00:02:13,000 --> 00:02:23,000
First you have to interface, you are already know neno from the to make that hub line X from where

24
00:02:23,000 --> 00:02:24,000
we are.

25
00:02:24,000 --> 00:02:28,000
After that your program will write.

26
00:02:29,000 --> 00:02:36,000
OK, so here I just need a constant and in this the board rate is nine six double.

27
00:02:37,000 --> 00:02:38,000
What are they doing now.

28
00:02:39,000 --> 00:02:43,000
So over here we require some indicator.

29
00:02:43,000 --> 00:02:47,000
So in this case I just use the indicators.

30
00:02:48,000 --> 00:02:53,000
So here this is my meter one and this is my middle.

31
00:02:54,000 --> 00:03:03,000
So as you see and we'll page maximum what is five in the both cases, as you know, the on board will

32
00:03:03,000 --> 00:03:04,000
be available on the Internet.

33
00:03:04,000 --> 00:03:05,000
No use whiteboard.

34
00:03:06,000 --> 00:03:14,000
So I just connect four zero two over here and one over here.

35
00:03:14,000 --> 00:03:19,000
So this is over here.

36
00:03:19,000 --> 00:03:20,000
So then I don't run.

37
00:03:20,000 --> 00:03:25,000
But right now the polls are open.

38
00:03:26,000 --> 00:03:35,000
So when I connect this one, this is the five, four and five always connected with the board zero.

39
00:03:35,000 --> 00:03:38,000
As you see, this is not the firewall.

40
00:03:39,000 --> 00:03:42,000
And over here, this is my.

41
00:03:49,000 --> 00:03:58,000
So what I hear when I write now, the program is in our condition, so many who don't run, but as you

42
00:03:58,000 --> 00:04:02,000
see or hear the word pages.

43
00:04:05,000 --> 00:04:13,000
And then I got to this to this right now, one is three point three hold and another one is white,

44
00:04:13,000 --> 00:04:14,000
as you see.

45
00:04:15,000 --> 00:04:23,000
So this is how you can acquire signals, multiple signals using already known.

46
00:04:24,000 --> 00:04:30,000
In this case, we got three point three walk in media and five in meter.

47
00:04:30,000 --> 00:04:34,000
As you see, this is three point three here and this is Firebaugh.

48
00:04:35,000 --> 00:04:40,000
OK, so this is how we can acquire signals using Ardino now.

49
00:04:40,000 --> 00:04:41,000
Thank you.

