1
00:00:09,000 --> 00:00:10,000
Good morning.

2
00:00:11,000 --> 00:00:25,000
I will tell you how to acquire analog signal using Ardino men, so first you have to just install Makaha

3
00:00:25,000 --> 00:00:28,000
little bulbs in your view.

4
00:00:29,000 --> 00:00:32,000
I already made a video on deck.

5
00:00:32,000 --> 00:00:44,000
So what here you just go to do this because I have a box in my system, so I just go to make up Linux.

6
00:00:45,000 --> 00:00:49,000
Linux bumblebees are basically this will interface.

7
00:00:49,000 --> 00:00:51,000
You're already on Nannerl with your.

8
00:00:53,000 --> 00:00:54,000
So we're here.

9
00:00:55,000 --> 00:01:00,000
Just select the device fambly device that I like.

10
00:01:00,000 --> 00:01:05,000
In this case I have already known and upload McCurdy's cereal.

11
00:01:07,000 --> 00:01:11,000
So just open next and we'll hear you just fine.

12
00:01:11,000 --> 00:01:19,000
You are all right now this is six and I just create next on this.

13
00:01:19,000 --> 00:01:37,000
So when I get next on this, as you see or hear Ross Artex and the LCD blinks, so it means you are

14
00:01:37,000 --> 00:01:43,000
interfacing pilots uploading in the Ardino now.

15
00:01:44,000 --> 00:01:54,000
OK, so as you see, it is uploaded on the already nonono.

16
00:01:55,000 --> 00:02:04,000
So when it is finished you just finish it and just go to Mulva.

17
00:02:05,000 --> 00:02:14,000
Over here in the lab, you just go to make that box here.

18
00:02:14,000 --> 00:02:24,000
This is my make up box and in this I just bust I open the board, then laws the board.

19
00:02:24,000 --> 00:02:31,000
And in between, I have just read that in this case I have to read it.

20
00:02:31,000 --> 00:02:46,000
So I just, you know, read I disconnect this fact with this editor who added and over here you got

21
00:02:46,000 --> 00:02:47,000
the board.

22
00:02:50,000 --> 00:03:03,000
And in this case, you go on board and you see and or hear there is the analog channel in VIN number,

23
00:03:04,000 --> 00:03:07,000
so create a constant that.

24
00:03:08,000 --> 00:03:18,000
So right now I'm using analog zero and it is the voltage or you can say output.

25
00:03:19,000 --> 00:03:22,000
So for that plus I just use a meter.

26
00:03:23,000 --> 00:03:38,000
In this case, I just need to look more edge and I use some air handler and ended up if I got some error

27
00:03:38,000 --> 00:03:39,000
in this case.

28
00:03:39,000 --> 00:03:44,000
So I just go home while you get a while.

29
00:03:44,000 --> 00:03:47,000
You were here and you have constant clock.

30
00:03:47,000 --> 00:03:51,000
So when I hit on one button,

31
00:03:55,000 --> 00:04:01,000
as you see right now, we have zero value.

32
00:04:01,000 --> 00:04:09,000
So I just go to the board and over here, this is my groundball.

33
00:04:09,000 --> 00:04:11,000
This is my favorite thing.

34
00:04:11,000 --> 00:04:14,000
I just check where is my analog?

35
00:04:15,000 --> 00:04:16,000
It was open.

36
00:04:16,000 --> 00:04:26,000
So this is at zero one over here for the whole thing is my analog zero.

37
00:04:26,000 --> 00:04:31,000
So as you see right now, the world is quite a over here.

38
00:04:31,000 --> 00:04:38,000
So when I move this and take this one.

39
00:04:38,000 --> 00:04:43,000
So this is my keyboard as you see or hear.

40
00:04:43,000 --> 00:04:45,000
This is my keyboard.

41
00:04:47,000 --> 00:04:52,000
And when I take this pain with this black one, this is my ground.

42
00:04:54,000 --> 00:04:58,000
So as you see now, the value is zero.

43
00:04:58,000 --> 00:05:07,000
So this is how you can acquire a signal using already known channel, which is analog signal.

44
00:05:08,000 --> 00:05:08,000
Thank you.