Now, since we will install active directory on this computer in the next step, we need to set the
IP address to be static.
So on the first stage will enter the network settings and include our virtual computer in the virtual
network.
So for this will select our 80 Salvy, that's our virtual computer and click settings, click on the
network tab we click attached to in the adapter one tab.
Click on that network.
And in the name section, just select that network, which is in that 10 zero two zero all the way through
24 IP block.
So a lot of second, either that card to the 80s serve computer.
And the reason for this is that I'm going to use it to access the disc.
That I will add to the 80s here computer and the cluster structure.
So just click on adapter to.
Enable network adapter.
And click on that network in the attached to section.
Now, the name section will select Nat Network one, and that, of course, is in the 10 zero 3.0 zero
through 24 IP block.
All right, so.
That process is completed just by clicking the OK button.
So click OK, and all right, so let's start our computer log in, username administrator, password
admin, one, two, three, question mark and exclamation mark.
All right, so first, let's learn our IP blog.
So click on the search icon type command and then enter it on the command line.
All right, IP config on their command screen and get the IP information and we'll define a static IP
using the information here.
So just right click on the network button in the lower right corner of the screen, click open network
and Internet settings.
And click on change adapter options on the screen that appears.
The network connection screen opens and it's in the screen, if you right, click on the Ethernet card,
just click on properties.
The Internet property screen open, so double click on Internet Protocol version for TCP IP v4 or click
the properties button on this screen.
So TCP IP for property screen opens and click on Use the following IP address and the fine and unused
IP address in the same block as the IP address seen on the command screen.
So I'm going to use 10 zero to 200 for my IP address.
You can you can give any IP address you want, provided that it is within that same IP block.
So all entered 10 zero to 200 in the IP address section here.
And for the subnet mask, 205 to identify 5.5 5.0.
And for the Gateway 10 dot zero tuda to.
And we will use this server as the DNS or domain name server.
And for that reason, all right, our own IP, which is 10 zero down to not 200 in the U.S.
The following DNS server addresses section.
Right, so click OK, and that completes that process.
So, right, click on Internet two and click on properties.
And the Ethernet property screen opens.
And then here on the Internet protocol versions for TCP, IP, for double click on it, or you can click
on the properties button on the screen.
And then when you get this screen open, click on the use the following IP address.
So in other words, it's here in IPV for propertied.
And then we can enter an unused IP address, provided it is in the same block.
And yeah, at the risk of boring you, I am going to repeat myself when things are very important and
necessary.
So remember to use the same IP block, I'm going to use 10 dots here, about three dozen, 200, so
I'm entering 10 zero three that 200 in the IP address section.
And for the subnet mask, 255 dot 205, that 205 dot zero.
This time, we'll leave the gateway section blank.
And of course, by clicking OK, a complete subprocess so we can move on to the network settings of
the other servers.