1 00:00:00,500 --> 00:00:00,810 Great. 2 00:00:00,960 --> 00:00:07,100 So now we will make the network settings of Askew will serve one. 3 00:00:08,190 --> 00:00:14,610 And in the first stage, we're going to enter the network settings and include our virtual computer 4 00:00:14,610 --> 00:00:16,140 in the virtual network. 5 00:00:16,470 --> 00:00:22,260 So for this, we'll just select our rescue all serve one virtual computer and click settings. 6 00:00:23,380 --> 00:00:24,790 Click on the network tab. 7 00:00:25,810 --> 00:00:29,920 And click on attached to right here in the adapter, one tab. 8 00:00:30,940 --> 00:00:32,380 Click on that network. 9 00:00:34,010 --> 00:00:36,860 And in the name selection select not network. 10 00:00:38,170 --> 00:00:45,120 In the 10 dot zero two zero through 24 IP block click OK and exit. 11 00:00:47,110 --> 00:00:53,650 Now, since we will install escarole server on this computer in the next step, we need to define two 12 00:00:53,650 --> 00:00:55,360 different static IPS. 13 00:00:55,900 --> 00:01:01,660 So if this will just add a second network card to our ask, you will serve one virtual computer. 14 00:01:03,020 --> 00:01:06,650 So this card will be used in our cluster structure. 15 00:01:07,620 --> 00:01:12,990 So in the virtual box screen, click on settings for Ask You All Server one. 16 00:01:14,230 --> 00:01:17,140 And network adapter to. 17 00:01:18,020 --> 00:01:20,510 And click enable network adapter. 18 00:01:21,720 --> 00:01:25,260 So here, just click on that network in the attached to section. 19 00:01:27,460 --> 00:01:36,190 And in the name section will select not network one, which is the 10 zero three zero to 24 IP block. 20 00:01:37,600 --> 00:01:41,050 And this process completes by clicking the OK button. 21 00:01:43,260 --> 00:01:47,850 And by clicking, the start button will start up our virtual computer. 22 00:01:49,250 --> 00:01:56,750 And let's log in user administrator, password admin, one, two, three, question mark, exclamation. 23 00:01:59,250 --> 00:02:05,160 Now click on the search icon type CMD and enter it on the command line. 24 00:02:07,120 --> 00:02:12,310 Well, right, I.P. config on the command screen and yet the IP information. 25 00:02:14,070 --> 00:02:20,490 And we will make sure that the IP that we see here is static. 26 00:02:21,880 --> 00:02:29,410 So we can now click on the search icon, right, Ethernet setting, click on Ethernet setting from the 27 00:02:29,410 --> 00:02:30,190 results here. 28 00:02:31,420 --> 00:02:34,950 And click on change adapter options on this screen. 29 00:02:37,610 --> 00:02:40,190 And that opens a network connection screen. 30 00:02:41,570 --> 00:02:48,800 So here we see two Ethernet cards and we'll define the IP addresses for them in order, so we'll right 31 00:02:48,800 --> 00:02:55,580 click on either net one and click properties and the Ethernet properties screen opens or double click 32 00:02:55,580 --> 00:02:59,180 on Internet Protocol versions 46 IPV for. 33 00:02:59,900 --> 00:03:03,440 Or of course, you can click on the properties button right here on the screen. 34 00:03:05,840 --> 00:03:14,480 And the Internet protocol version for TCAP, IPV for property screen opens so click on use the following 35 00:03:14,480 --> 00:03:18,230 IP address and will enter an unused IP address. 36 00:03:19,120 --> 00:03:23,920 Provided it's in the same block, I know you knew that, but I had to say it. 37 00:03:25,250 --> 00:03:32,330 So I will use 10 zero to that to one for the Ethernet card. 38 00:03:34,480 --> 00:03:43,620 Remember, I used it for 10 zero to not 200 on the ad server, so well, right. 39 00:03:44,540 --> 00:03:47,900 Ten zero two two zero one. 40 00:03:48,790 --> 00:03:50,290 As its IP address. 41 00:03:51,860 --> 00:03:52,550 Subnet. 42 00:03:53,570 --> 00:03:57,320 255, 255, 255 zero. 43 00:03:58,940 --> 00:04:02,660 And for the gateway, 10 zero to dot one. 44 00:04:04,810 --> 00:04:07,680 And click, OK, and that completes that process. 45 00:04:11,060 --> 00:04:14,480 Great, so now, right, click on Internet two and click on properties. 46 00:04:15,620 --> 00:04:22,400 That opens the Ethan Up property screen double click on IPV for Tsipi V4 or click the properties button. 47 00:04:23,570 --> 00:04:30,530 And that opens this screen, so click on they use the following IP address and will enter an unused 48 00:04:30,530 --> 00:04:33,020 IP address provided it's in the same block. 49 00:04:34,470 --> 00:04:35,640 And what am I going to do? 50 00:04:35,670 --> 00:04:42,540 I'm going to use 10 zero three two zero one for the second or Ethernet to card. 51 00:04:43,840 --> 00:04:48,730 So in the IP address section entered 10 zero three two zero one. 52 00:04:50,050 --> 00:04:55,060 Subnet mask is 255, 255 that 215 dot zero. 53 00:04:56,210 --> 00:04:58,460 And we leave the gateway section blank. 54 00:04:59,480 --> 00:05:02,450 Click OK, and that completes the process.