1
00:00:00,950 --> 00:00:01,670
Terrific.

2
00:00:01,700 --> 00:00:09,380
So now we're going to set up our network setting of the school as Harvey to server.

3
00:00:11,280 --> 00:00:17,310
So in the first stage will enter the network settings and include our virtual computer in the virtual

4
00:00:17,310 --> 00:00:17,850
network.

5
00:00:18,860 --> 00:00:25,440
And for this, we select our Escuela well server to virtual computer and click settings.

6
00:00:26,970 --> 00:00:28,260
Click on Network Tab.

7
00:00:29,310 --> 00:00:36,480
And in the adapter, one tab click attached to click on that network.

8
00:00:37,520 --> 00:00:46,190
So in the name section will select Not Network, which is in the IP block 10 zero DOT 2.0 through 24.

9
00:00:47,970 --> 00:00:51,950
Of course, since we're going to install ask you all server on this computer in the next step, we will

10
00:00:51,950 --> 00:00:55,280
define two different static IPS.

11
00:00:56,900 --> 00:01:02,360
For this, we will add a second network car to our escarole server to virtual.

12
00:01:03,480 --> 00:01:09,090
So this either a card will be used in a cluster structure and click on adapter to.

13
00:01:09,990 --> 00:01:11,790
Enabled network adapter.

14
00:01:12,750 --> 00:01:16,350
And in the attached to Section Quicknet network.

15
00:01:17,980 --> 00:01:21,160
Now in the name selection will select that network one.

16
00:01:22,220 --> 00:01:28,850
Which is the 10 zero three nine zero through 24 IP block.

17
00:01:32,030 --> 00:01:36,980
And by pressing the OK button, this process is now complete.

18
00:01:39,080 --> 00:01:42,740
So let's click the start button, and that starts our virtual computer.

19
00:01:43,910 --> 00:01:50,540
And we can now log in for a username administrator, password admin, one, two, three, question mark

20
00:01:50,540 --> 00:01:51,920
and exclamation mark.

21
00:01:53,890 --> 00:01:58,680
Now click on the search icon type ACMD and enter it on the command line.

22
00:02:00,580 --> 00:02:05,530
And right, I.P. config on the command screen and get the IP information.

23
00:02:06,740 --> 00:02:12,680
Now, of course, we need these to be static, so we'll define the IP values here.

24
00:02:14,300 --> 00:02:18,560
Let's click the search icon and type in Ethernet setting.

25
00:02:19,440 --> 00:02:24,930
Click on Ethernet setting from the results, they can change adapter options.

26
00:02:26,350 --> 00:02:29,770
And that opens up the network connection screen.

27
00:02:31,060 --> 00:02:34,240
So on this green will see to Ethernet cards.

28
00:02:35,350 --> 00:02:42,490
And we will define the static IPS for them in order, so, right, click on Ethernet one and click properties.

29
00:02:43,870 --> 00:02:52,230
And that opens the Ethernet property screen, so double click on Internet protocol versions for DCPI

30
00:02:52,240 --> 00:02:55,600
before, or you can click on the properties button on the screen.

31
00:02:56,320 --> 00:02:57,310
It doesn't matter.

32
00:02:58,700 --> 00:03:04,070
Either way, you get the Internet protocol version for TCP, IP for property.

33
00:03:06,010 --> 00:03:14,110
And you can click on use the following IP address and enter an unused IP address, provided it is in

34
00:03:14,110 --> 00:03:14,860
the same block.

35
00:03:16,140 --> 00:03:24,720
Well, I use I'll use 10 dot zero two two zero two for the Ethernet card, so I'm just going to write

36
00:03:24,720 --> 00:03:30,780
10 zero two two zero two and the IP address section.

37
00:03:31,650 --> 00:03:37,500
And for the subnet mask, 255, 255, 255 zero.

38
00:03:39,250 --> 00:03:42,910
Now for the Gateway 10 zero two dot one.

39
00:03:45,100 --> 00:03:48,280
And by clicking, OK, that will complete the process.

40
00:03:52,570 --> 00:03:57,280
So now here on Ethernet to right, click and click on properties.

41
00:03:58,880 --> 00:04:05,000
And that opens Ethernet property screen double click on DCP IP V4 or click the properties button.

42
00:04:06,610 --> 00:04:16,210
And that opens up the TPP for properties window, so click on use the following IP address and an unused

43
00:04:16,210 --> 00:04:18,940
IP address provided it's in that same block.

44
00:04:19,950 --> 00:04:30,660
OK, I'm going to use 10 zero three two zero two for my second Ethernet card and enter 10 zero three

45
00:04:31,040 --> 00:04:34,950
two zero two right here in the IP address section.

46
00:04:36,660 --> 00:04:44,910
And for the subnet mask, 255 dot 255 dot you 5.0 and we'll leave the gateway blank again.

47
00:04:46,150 --> 00:04:48,550
All right, so click, OK, and that completes the process.

48
00:04:49,590 --> 00:04:53,220
So now we can get to the cluster set up.