WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:0 00:00:06.980 --> 00:00:09.345 Okay, good-looking people. 00:00:09.345 --> 00:00:12.255 What we're going to do in this video is work on our master pages. 00:00:12.255 --> 00:00:14.115 When we draw our rectangle, 00:00:14.115 --> 00:00:17.020 pretty little box that our page number is going to go into. 00:00:17.020 --> 00:00:19.935 We do it once and it appears on all of our pages. 00:00:19.935 --> 00:00:21.735 Let's go and do that. 00:00:21.735 --> 00:00:25.170 To work on the Master page is we need to say this page is panel. 00:00:25.170 --> 00:00:29.745 So got a window pages if you can't see it and just have a little look at these pages, 00:00:29.745 --> 00:00:31.020 I've got page one, two, three, 00:00:31.020 --> 00:00:32.640 four, but you can see the A in the corner. 00:00:32.640 --> 00:00:34.850 It means that they're attached to something called the A-Master. 00:00:34.850 --> 00:00:36.705 That's there by default, you are given one. 00:00:36.705 --> 00:00:38.760 You can have as many master pages as you need, 00:00:38.760 --> 00:00:42.410 and you put things on the master page that you want to appear on every page, 00:00:42.410 --> 00:00:43.595 like a page number, 00:00:43.595 --> 00:00:47.870 maybe it's a small like a title of the document, 00:00:47.870 --> 00:00:50.285 it's version or date or who produced it. 00:00:50.285 --> 00:00:52.820 Anything that you want to be consistent on every page, 00:00:52.820 --> 00:00:56.540 it might be some graphics or logo or watermark to get to the master page, 00:00:56.540 --> 00:00:58.490 you need to double-click up here. 00:00:58.490 --> 00:01:01.625 You might not be able to see it, so you might have to scroll down or find it, 00:01:01.625 --> 00:01:04.415 see if you can see it hiding up in the top of the pages panel. 00:01:04.415 --> 00:01:08.570 To get to it, you just double-click it and you got to make sure you're there. 00:01:08.570 --> 00:01:10.560 To make sure it's a little, it's not very obvious. 00:01:10.560 --> 00:01:13.670 I wish there was like a big flashing green light that seed you will in here, 00:01:13.670 --> 00:01:15.785 but down the bottom here it says A-Master. 00:01:15.785 --> 00:01:20.105 I'm not on one page or two or three am on A- Master. 00:01:20.105 --> 00:01:23.855 I've zoomed out a little bit just so I can see it all. Maybe not that file. 00:01:23.855 --> 00:01:27.620 It's got the rectangle tool and let's have the top here give it a fill of 00:01:27.620 --> 00:01:31.770 magenta is fine and just draw a big rectangle on this left-hand side. 00:01:31.770 --> 00:01:32.900 What you'll notice is, 00:01:32.900 --> 00:01:37.145 can you see here that rectangle is appeared on all the left-hand spreads. 00:01:37.145 --> 00:01:39.635 Not on the right hand ones I'm drawn anything on this side 00:01:39.635 --> 00:01:41.780 because you'll have things like page numbering on 00:01:41.780 --> 00:01:46.895 different sides of the pages or you only want the document name and the top right. 00:01:46.895 --> 00:01:50.330 You don't need it on the top right of this page so you have left and right spread. 00:01:50.330 --> 00:01:52.639 Do the same thing over here do a different style, 00:01:52.639 --> 00:01:54.755 a box maybe a different color. 00:01:54.755 --> 00:02:00.875 Just so that you can see over here that when I draw stuff on the Master page, 00:02:00.875 --> 00:02:02.630 it appears on all of my pages. 00:02:02.630 --> 00:02:04.130 You'll notice if I go to these pages, 00:02:04.130 --> 00:02:09.200 double-click on page one, grab my black arrow is I can actually select it. 00:02:09.200 --> 00:02:10.220 If I need to delete it, 00:02:10.220 --> 00:02:11.875 it needs to come off the master page. 00:02:11.875 --> 00:02:14.120 Let's jump back to our master page, double-click it, 00:02:14.120 --> 00:02:17.100 and select new and delete it. 00:02:17.100 --> 00:02:19.100 What I'd like to do is grab the rectangle tool 00:02:19.100 --> 00:02:21.110 and I'd like to draw a rectangle that sits down 00:02:21.110 --> 00:02:23.300 the bottom we're going to be doing you sorted the beginning 00:02:23.300 --> 00:02:25.520 there kind of like a box that sits on the bottom. 00:02:25.520 --> 00:02:28.520 I wanted to make sure it overlaps the brief so gets trimmed off in 00:02:28.520 --> 00:02:31.820 the bun and it goes right up until the spine here. How far up? 00:02:31.820 --> 00:02:35.510 Let's have a guess we can change it later on and you'll notice on page one, there it is, 00:02:35.510 --> 00:02:37.420 they double-click Page two, 00:02:37.420 --> 00:02:41.345 I've got that nice color box will duplicate it for the other side in sec. 00:02:41.345 --> 00:02:43.460 On page one, actually, 00:02:43.460 --> 00:02:45.585 make sure you go back to my A-Master, 00:02:45.585 --> 00:02:48.650 I promise you'll be like the world's best user of 00:02:48.650 --> 00:02:51.710 the InDesign and you will still forget you're not on the Master page. 00:02:51.710 --> 00:02:56.105 It's been ages designing something on page one thinking it's on the Master page, 00:02:56.105 --> 00:03:00.025 and have to copy and paste it afterwards, we always forget. 00:03:00.025 --> 00:03:03.500 Same happens when you think you're designing on page one and you're actually in 00:03:03.500 --> 00:03:06.935 the master page and you realize everything you've designed is on every single page, 00:03:06.935 --> 00:03:09.365 you just have to do some copying and pasting afterwards. 00:03:09.365 --> 00:03:12.965 Next thing we want to do is I want to fill this with one about colors. 00:03:12.965 --> 00:03:16.280 What you can do when you get started with the new document is you'll see at 00:03:16.280 --> 00:03:19.370 the top here there's actually none of those colors through it that's sitting over there, 00:03:19.370 --> 00:03:20.900 which is no big drama. 00:03:20.900 --> 00:03:24.200 But you can't be all official and bring this swatches through properly. 00:03:24.200 --> 00:03:26.825 With a black arrow, have nothing selected, okay, 00:03:26.825 --> 00:03:30.020 right-click this guy and say add these swatches and just do it for all of them, 00:03:30.020 --> 00:03:35.490 so you know you've got all of our colors as part of the swatches thing. 00:03:35.490 --> 00:03:38.120 There he is there. It's a bit weird. 00:03:38.120 --> 00:03:40.505 I know that there, but why aren't they there? 00:03:40.505 --> 00:03:44.705 It's because this is kind of new and there's not a super slick integration yet. 00:03:44.705 --> 00:03:48.425 That will change, if I have the selected and at the top here, 00:03:48.425 --> 00:03:51.665 I'm going to pick my green at heart rate. 00:03:51.665 --> 00:03:53.710 You will see it appears on all the right hand spreads. 00:03:53.710 --> 00:03:54.940 Now I'm going to select it, 00:03:54.940 --> 00:03:56.920 copy and paste it, edit copy, 00:03:56.920 --> 00:04:01.535 edit paste and we're going to have a left-hand spread as well. 00:04:01.535 --> 00:04:03.195 Let's double check it on other pages. 00:04:03.195 --> 00:04:05.710 Double-click page A, page two, 00:04:05.710 --> 00:04:08.890 page three is all a little foot out color box. 00:04:08.890 --> 00:04:10.630 The next thing we're going to do is do 00:04:10.630 --> 00:04:14.275 our automatic page numbering will do that in the next video. Skip to that. 00:04:14.275 --> 00:04:17.785 One of the things I want to explain before we move on though is, 00:04:17.785 --> 00:04:19.870 master pages control all of these pages. 00:04:19.870 --> 00:04:24.249 So when it comes to things like adjusting the margins and columns, 00:04:24.249 --> 00:04:28.555 it's best to do it in the A-Master because it'll adjust all the pages. 00:04:28.555 --> 00:04:31.370 If I say so I got page one and I'm like, 00:04:31.370 --> 00:04:36.535 I want to change the columns to four and I go up to object, 00:04:36.535 --> 00:04:41.020 layout sorry and get a margins and I pick columns are now going to be four. 00:04:41.020 --> 00:04:43.240 Click Okay. What happens is page one 00:04:43.240 --> 00:04:46.915 changed because see page two and three are still the same. 00:04:46.915 --> 00:04:48.920 So that's how to change individual pages, 00:04:48.920 --> 00:04:50.555 but probably more often than not, 00:04:50.555 --> 00:04:52.550 you just want to actually change them all. 00:04:52.550 --> 00:04:55.085 Okay, you've decided you want change the modulus on everything. 00:04:55.085 --> 00:04:57.170 You do that by going a master, 00:04:57.170 --> 00:04:59.290 so double-click it and make the changes in here. 00:04:59.290 --> 00:05:01.940 Now if I go to object, 00:05:01.940 --> 00:05:07.620 and it's going to layout margins and go to four and you'll see it does this page. 00:05:08.210 --> 00:05:11.390 You have the drop here and double-click this page go and make it go 00:05:11.390 --> 00:05:13.760 blue and do it for this side as well. 00:05:13.760 --> 00:05:18.035 Fiddly, I know, but that's the way it is, it's going to fall. 00:05:18.035 --> 00:05:20.375 Now, what you'll notice is I got to page one, 00:05:20.375 --> 00:05:21.780 page two, page three, 00:05:21.780 --> 00:05:23.270 I've done those adjustments. 00:05:23.270 --> 00:05:24.980 If you are finding it's a little bit weird it's 00:05:24.980 --> 00:05:27.530 probably because you're not doing it on your master page. 00:05:27.530 --> 00:05:29.590 I'm going to undo that. 00:05:29.590 --> 00:05:33.880 Let's go and do automatic page numbering in the next video.