WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:0 00:00:07.040 --> 00:00:10.590 Hi there, in this video we're going to look at creating 00:00:10.590 --> 00:00:14.145 dotted lines and dashed lines, perforation lines. 00:00:14.145 --> 00:00:16.800 We're going to do wavy lines and strappy lines and all lines, 00:00:16.800 --> 00:00:19.120 Let's go and do that now. 00:00:19.130 --> 00:00:21.900 To put the border around the outside, 00:00:21.900 --> 00:00:23.520 we're going to start with a rectangle. 00:00:23.520 --> 00:00:26.880 The rectangle tool, not the rectangle frame tool, 00:00:26.880 --> 00:00:29.475 and what I'd like to do is you saw 00:00:29.475 --> 00:00:32.655 earlier that I had to perfectly away from the edge now. 00:00:32.655 --> 00:00:36.540 What I can do is I can draw it exactly the right size, 00:00:36.540 --> 00:00:39.660 remember, that is actually the edge of the page. 00:00:39.660 --> 00:00:42.585 This bit on the outside here is the bleed, remember. 00:00:42.585 --> 00:00:45.975 I'm going to draw the actual size, my half letter. 00:00:45.975 --> 00:00:48.015 It's a nice big rectangle, 00:00:48.015 --> 00:00:51.350 now we've got a fill of green and a stroke of nothing. 00:00:51.350 --> 00:00:55.400 I'll leave it there for the moment just while we're practicing this because if 00:00:55.400 --> 00:00:58.775 I grab my selection tool and I try and scale it down proportionately, 00:00:58.775 --> 00:01:00.675 one of the keys, that's, 00:01:00.675 --> 00:01:03.270 Command and Shift on the Mac, 00:01:03.270 --> 00:01:05.280 and Control and Shift on a PC. 00:01:05.280 --> 00:01:08.255 If I hold them down and I make them proportionately smaller. 00:01:08.255 --> 00:01:10.760 You'll notice that if I put it here in the middle is 00:01:10.760 --> 00:01:14.780 actually doesn't scale the way we want. 00:01:14.780 --> 00:01:16.490 We want equal distances around the outside. 00:01:16.490 --> 00:01:18.730 I first scale it down even more. 00:01:18.730 --> 00:01:21.740 You can see it's a lot bigger in the sides than it 00:01:21.740 --> 00:01:24.230 is in the top and the bottom just because it's scaling that way. 00:01:24.230 --> 00:01:26.510 What I'd like to do is I'm going to undo, 00:01:26.510 --> 00:01:28.760 it actually fills the outside. 00:01:28.760 --> 00:01:31.460 What we can do, you can see at the top here it's got a width and height, 00:01:31.460 --> 00:01:33.275 it's perfect, it matches my off data. 00:01:33.275 --> 00:01:35.765 What I can do in here is some basic math. 00:01:35.765 --> 00:01:38.375 These little boxes, any of these little white boxes, 00:01:38.375 --> 00:01:40.370 you can do some little math, which is really handy. 00:01:40.370 --> 00:01:45.790 In here, I can go minus and I'm going to turn up half an inch 0.5. 00:01:45.790 --> 00:01:49.005 You'll see it's exactly half an inch. 00:01:49.005 --> 00:01:51.165 Do the same here, minus 0.5. 00:01:51.165 --> 00:01:54.885 You can do times, If I did times 2, 00:01:54.885 --> 00:01:57.090 it will be times 2 inches, 00:01:57.090 --> 00:01:58.830 it's that little asterisks, 00:01:58.830 --> 00:02:02.345 and it's a whole lot told them that needs to be, I undo. 00:02:02.345 --> 00:02:08.005 I'm going to get minus 0.5 minus plus all that stuff works, 00:02:08.005 --> 00:02:09.335 and to get it in the middle, 00:02:09.335 --> 00:02:10.400 you could use your line tools. 00:02:10.400 --> 00:02:11.660 There's mine at the top here, 00:02:11.660 --> 00:02:13.325 or there was a panel that we saw earlier, 00:02:13.325 --> 00:02:16.220 but actually it's just easier to grab your black arrow click "Hold", 00:02:16.220 --> 00:02:18.080 and you'll notice that it just snaps. 00:02:18.080 --> 00:02:19.625 You see those two purple, 00:02:19.625 --> 00:02:21.890 pinky lines just saying, "Hey, 00:02:21.890 --> 00:02:24.905 there's the middle," and you'll see visually it looks like it's in the middle. 00:02:24.905 --> 00:02:29.585 It's actually 0.5, half an inch from all the sides and it looks nice and perfect. 00:02:29.585 --> 00:02:31.370 Now, to make the line dotted. 00:02:31.370 --> 00:02:34.940 We're going to give it no fill, click on my fill, 00:02:34.940 --> 00:02:37.670 I'm going to get a none, and this one here, 00:02:37.670 --> 00:02:40.550 the structure on the outside, I'm going to make a white, or paper. 00:02:40.550 --> 00:02:43.400 This is the stroke here, how thick it is. 00:02:43.400 --> 00:02:44.475 At the moment it's one point, 00:02:44.475 --> 00:02:45.500 it's probably what I want, 00:02:45.500 --> 00:02:48.740 but let's make it nice and big just as an example so we can all see what we're doing. 00:02:48.740 --> 00:02:52.775 So bump it up to four points and now we need to find our stroke panel. 00:02:52.775 --> 00:02:56.435 Mine is there, if you can't find yours here go to Window, 00:02:56.435 --> 00:02:58.360 go down to Stroke and turn it on. 00:02:58.360 --> 00:03:00.440 Now, yours might look a little different as well, 00:03:00.440 --> 00:03:02.435 yours might be these little flier means new that 00:03:02.435 --> 00:03:05.005 higher options and if yours looks like mine, 00:03:05.005 --> 00:03:06.690 you've got really basic control. 00:03:06.690 --> 00:03:09.330 Click on this option and say "Show Options" and you get 00:03:09.330 --> 00:03:11.690 the big aggravation with all the details that we 00:03:11.690 --> 00:03:14.560 need and the one we need the moment is type. 00:03:14.560 --> 00:03:16.775 That's going to allow us to change it from a solid line that 00:03:16.775 --> 00:03:18.950 we know it to all these other options. 00:03:18.950 --> 00:03:20.570 There's some wind ones, 00:03:20.570 --> 00:03:23.675 ones that I've never used Thick-Thin, you might like them, 00:03:23.675 --> 00:03:25.135 White Diamond I've used, 00:03:25.135 --> 00:03:27.320 Dotted lines and Dashed lines are the ones that we're going 00:03:27.320 --> 00:03:29.390 to look at the moment and there's two kinds of dotted. 00:03:29.390 --> 00:03:31.400 Here there's dotted and 00:03:31.400 --> 00:03:34.780 some reason the Japanese like their dots a little bit closer together. 00:03:34.780 --> 00:03:37.470 Japanese thing not sure. 00:03:37.470 --> 00:03:39.555 There's my dots around here, 00:03:39.555 --> 00:03:41.490 so if you want a dashed, 00:03:41.490 --> 00:03:45.070 is dashed, this at the squiggly line. 00:03:45.070 --> 00:03:46.785 You might like the squiggly line. 00:03:46.785 --> 00:03:48.415 Isn't way things and they're okay, 00:03:48.415 --> 00:03:54.815 but we're going to go to dotted and we're going put the size down to something, 00:03:54.815 --> 00:03:57.395 I don't know, I'm putting two points. 00:03:57.395 --> 00:04:00.710 Now, you might use dashed lines as a visual thing, like I'm doing here. 00:04:00.710 --> 00:04:04.350 There's nothing this dotted line just for pretty sake. 00:04:04.350 --> 00:04:07.035 What we're going to do is maybe it's snip here, 00:04:07.035 --> 00:04:09.905 this is this like cut this bit off for the reading your coupon. 00:04:09.905 --> 00:04:12.620 What you can do is instead of doing for this rectangle, 00:04:12.620 --> 00:04:15.665 you can do the exact same tricks with just a straight line. 00:04:15.665 --> 00:04:17.495 The straight line here I could draw, 00:04:17.495 --> 00:04:20.570 and what am I do actually is draw it straight up and down. 00:04:20.570 --> 00:04:22.490 If you want to draw a line straight up and down, 00:04:22.490 --> 00:04:26.660 it's the similar technique we did when we made a circle. 00:04:26.660 --> 00:04:29.125 remember, we held on Shift and it was a perfect circle. 00:04:29.125 --> 00:04:31.370 That same technique makes it a perfect line. 00:04:31.370 --> 00:04:33.440 So I hold down shift before I start drawing it out. 00:04:33.440 --> 00:04:36.260 You can see it really wants to go straight up and down. 00:04:36.260 --> 00:04:39.680 Say, that's going to be my perforation line where I want people to snip it off. 00:04:39.680 --> 00:04:43.500 It's got a line fill, 00:04:43.500 --> 00:04:46.425 and the liner on the outside is going to be white. 00:04:46.425 --> 00:04:48.980 I'm going to make it two points just so you can see 00:04:48.980 --> 00:04:51.500 it and then you can see the exact same controls. 00:04:51.500 --> 00:04:53.520 Hey, somebody's calling. 00:04:53.520 --> 00:04:57.100 Let's go to dashed lines. 00:04:59.480 --> 00:05:03.060 I'm going to pause there, go take the phone, I'll be right back. 00:05:03.060 --> 00:05:07.580 I'm back and this dashed line, I don't need it, 00:05:07.580 --> 00:05:10.280 so I've selected with my black arrow and just hit "Delete" on my keyboard, 00:05:10.280 --> 00:05:12.640 just tap the key on the keyboard and it's gone. 00:05:12.640 --> 00:05:15.230 Dashed lines, dotted lines, wavy lines, 00:05:15.230 --> 00:05:17.750 curly lines, all of that. 00:05:17.750 --> 00:05:20.490 Let's move on to our next video.