1 00:00:03,050 --> 00:00:09,470 Now, in this video, I will show you how to convert curve's and convert corners and where it applies, 2 00:00:09,500 --> 00:00:10,760 it doesn't apply only to the. 3 00:00:11,220 --> 00:00:13,040 That's why I kept it aside. 4 00:00:13,070 --> 00:00:15,050 It will apply to almost all ships. 5 00:00:15,800 --> 00:00:17,240 So let's start with the Pentel. 6 00:00:17,690 --> 00:00:20,170 So I'm going to create some curves, OK? 7 00:00:20,480 --> 00:00:22,930 And some corners. 8 00:00:23,120 --> 00:00:24,170 These are curves now. 9 00:00:24,680 --> 00:00:26,630 And here we start a corner. 10 00:00:26,660 --> 00:00:33,860 Notice how there is a corner and then another corner, for example, and then a curve and then close 11 00:00:33,860 --> 00:00:34,010 it. 12 00:00:34,010 --> 00:00:34,430 Simple. 13 00:00:34,850 --> 00:00:36,050 Now I made some mistakes. 14 00:00:36,050 --> 00:00:41,630 For example, I want this point here not to be cordner, but to be a curve, you know, just like this 15 00:00:41,630 --> 00:00:42,260 one over here. 16 00:00:42,920 --> 00:00:46,070 The way to do it with the pental, you can press the option key. 17 00:00:46,310 --> 00:00:47,000 And here you are. 18 00:00:47,000 --> 00:00:48,580 You are into the conversion. 19 00:00:48,590 --> 00:00:51,910 You remember this is the conversion here, all the anchor points. 20 00:00:52,720 --> 00:00:54,180 So you press the option key. 21 00:00:54,290 --> 00:00:58,490 If you are on the PC, it will be the alky and click and block. 22 00:00:58,850 --> 00:01:01,300 OK, a simple click onto it. 23 00:01:01,730 --> 00:01:03,870 So you need to click and drag. 24 00:01:04,040 --> 00:01:04,660 Here you are. 25 00:01:04,910 --> 00:01:09,020 And now you have converted the corners into smooth curves. 26 00:01:09,410 --> 00:01:10,700 Good now. 27 00:01:10,700 --> 00:01:12,050 And I say, OK, this one. 28 00:01:12,050 --> 00:01:14,660 I don't want it to be a smooth curve. 29 00:01:14,660 --> 00:01:16,220 I want to be a corner. 30 00:01:16,700 --> 00:01:19,250 I will press the option key and click once. 31 00:01:19,250 --> 00:01:22,790 Not just now it's a corner and click once it's a corner. 32 00:01:22,820 --> 00:01:26,510 You notice ok that all convert it to corner from the back. 33 00:01:26,510 --> 00:01:28,130 I can just click and drag. 34 00:01:28,610 --> 00:01:30,890 These options are also available in the properties. 35 00:01:31,190 --> 00:01:34,310 If you select a point, ok, you can use even the white. 36 00:01:34,310 --> 00:01:36,770 I always do that because have seen about the pen. 37 00:01:37,220 --> 00:01:43,280 You can select this point here and you have the choice to convert it to Point Corner, which is it is 38 00:01:43,290 --> 00:01:48,190 a corner and then you convert it to a smooth or smooth whiskers. 39 00:01:48,200 --> 00:01:48,750 Here you are. 40 00:01:49,520 --> 00:01:52,040 Now this is very practical, OK? 41 00:01:52,040 --> 00:01:53,360 And it can help you a lot. 42 00:01:53,540 --> 00:01:57,190 I like that you get started on using this property here. 43 00:01:57,620 --> 00:01:59,210 Now, notice the White Arrow. 44 00:01:59,210 --> 00:02:02,720 I'm pressed the option key I actually will duplicate. 45 00:02:02,810 --> 00:02:04,220 OK, be careful on that. 46 00:02:04,520 --> 00:02:07,120 The command key will just go to the selection tool. 47 00:02:07,120 --> 00:02:09,290 Now we are just moving it. 48 00:02:09,560 --> 00:02:16,070 So if you are in the White Arrow and you select a point over here, an anchor, you can use these to 49 00:02:16,070 --> 00:02:16,970 convert here. 50 00:02:17,120 --> 00:02:18,620 In our case, this one will do well. 51 00:02:20,850 --> 00:02:22,860 Not until you have anchors you can remove. 52 00:02:23,100 --> 00:02:27,270 You can join and you can cut less, cut less that by cutting. 53 00:02:27,300 --> 00:02:29,460 I'm going to take this point here and cut. 54 00:02:29,820 --> 00:02:32,640 OK, so it cut a path at selected anchor point. 55 00:02:33,360 --> 00:02:36,150 You say nothing has happened, but actually it has got it noticed. 56 00:02:36,150 --> 00:02:37,220 You have two pieces now. 57 00:02:37,710 --> 00:02:38,430 Pretty amazing. 58 00:02:38,610 --> 00:02:41,160 So now you can also join them. 59 00:02:41,160 --> 00:02:45,750 If both of them if you like both of them here, you can join them. 60 00:02:45,780 --> 00:02:46,590 Here is the joint. 61 00:02:47,400 --> 00:02:50,310 OK, so I join them with a straight line. 62 00:02:50,800 --> 00:02:55,920 You can select this point and curve it, select this point if you want to and curve it. 63 00:02:56,220 --> 00:02:57,870 Pretty interesting, right, guys? 64 00:02:59,500 --> 00:03:05,950 The problem with the White Arrow, if selected point, just delete it, actually delete you, not the 65 00:03:05,950 --> 00:03:13,120 point itself and whatever was there, but which can do is to use this minus here, remove selected anchor 66 00:03:13,120 --> 00:03:13,450 point. 67 00:03:13,660 --> 00:03:18,100 And that's what's going to happen, is not going to destroy your path with the right tool. 68 00:03:18,100 --> 00:03:21,370 If you remember reselected press, delete it did it to the point. 69 00:03:21,370 --> 00:03:24,190 And here you are, you have an open path which is almost destroyed. 70 00:03:24,700 --> 00:03:28,210 But with this option here, you just remove selected anchor points. 71 00:03:28,210 --> 00:03:33,880 So you removing the anchor point, you're not deleting anything and you have now continuity in the path 72 00:03:34,120 --> 00:03:35,260 while you have the removed. 73 00:03:35,500 --> 00:03:42,100 So I'm bringing this to your attention because not only it applies to path, but also it apply to the 74 00:03:42,100 --> 00:03:43,000 curvature tool. 75 00:03:43,450 --> 00:03:48,040 Actually, wherever there are some anchor points, it can apply. 76 00:03:48,370 --> 00:03:49,150 I will go. 77 00:03:49,150 --> 00:03:50,170 I selected this one. 78 00:03:50,650 --> 00:03:52,270 I can use the White Arrow. 79 00:03:52,840 --> 00:03:55,240 So like this guy, I have the options over here. 80 00:03:55,450 --> 00:03:56,250 Make it corner. 81 00:03:56,440 --> 00:03:57,970 OK, and now it's a coin. 82 00:03:58,920 --> 00:04:04,440 I can select it and obviously if the corner can convert it back to a smooth one. 83 00:04:05,470 --> 00:04:10,350 Then I can select this guy, for example, and delete it, OK, that's easy with the curvature tool, 84 00:04:10,620 --> 00:04:12,620 but here it's quite some help. 85 00:04:13,080 --> 00:04:15,640 Then you can select this guy and cut it. 86 00:04:15,810 --> 00:04:19,200 OK, now you have an open shape, something like this. 87 00:04:19,710 --> 00:04:23,930 Also, all of these apply to shapes and that will be interesting for you. 88 00:04:24,300 --> 00:04:31,740 Let's create a square and let's go for the White Arrow, the dark selection, select one corner, for 89 00:04:31,740 --> 00:04:38,230 example, and just make it a curve or smooth it and you can select this one and smooth it. 90 00:04:38,610 --> 00:04:40,860 Now you really have something to work with. 91 00:04:40,860 --> 00:04:44,570 For example, this is how I did the eyes, OK? 92 00:04:45,270 --> 00:04:50,970 I did the eyes for the crown, if you know, if you remember in the previous video and then you also 93 00:04:50,970 --> 00:04:53,870 can make them corners again and work on them. 94 00:04:54,270 --> 00:04:55,440 You can cut them. 95 00:04:55,740 --> 00:05:00,270 So you have one here, one here, select both of them and join them. 96 00:05:00,660 --> 00:05:02,410 And also you can cut the points. 97 00:05:02,430 --> 00:05:04,890 So now it's going to cut the two points that are selected. 98 00:05:05,310 --> 00:05:09,300 OK, not this, but it kept my path almost intact. 99 00:05:10,160 --> 00:05:15,320 Unfortunately, our case here, you do not have the plus, but I think it's OK because you will go to 100 00:05:15,320 --> 00:05:18,610 the eventual and just add something over here. 101 00:05:19,220 --> 00:05:23,030 You have now another point that you can play with the way you would like. 102 00:05:24,080 --> 00:05:29,060 That was a kind of reminder, but but I do want to put it with the Pentagon like you think it's only 103 00:05:29,060 --> 00:05:33,390 been to not it's for every single ship, every single path you have drawn. 104 00:05:34,070 --> 00:05:34,480 Thank you. 105 00:05:34,490 --> 00:05:39,530 I will see you in the next video and I'll show you some more awesomeness within you later.